Vapor deposition of organic-inorganic hybrid perovskite thin-films for photovoltaic applications

Yttria-stabilized zirconia (YSZ) is currently used in a variety of applications including oxygen sensors, fuel cells, coatings for semiconductor lasers, and buffer layers for high-temperature superconducting films. Thin films of YSZ have been grown by metal-organic chemical vapor deposition, electrochemical vapor deposition, pulse-laser deposition (PLD), electron-beam evaporation, and sputtering. In this investigation, PLD was used to grow thin films of YSZ on (100) MgO substrates. This system proves to be an interesting example of relationships between interfaces and extrinsic dislocations in thin films of YSZ.In this experiment, a freshly cleaved (100) MgO substrate surface was prepared for deposition by cleaving a lmm-thick slice from a single-crystal MgO cube. The YSZ target material which contained 10mol% yttria was prepared from powders and sintered to 85% of theoretical density. The laser system used for the depositions was a Lambda Physik 210i excimer laser operating with KrF (λ=248nm, 1Hz repetition rate, average energy per pulse of 100mJ).

Download Full-text

Formation of high temperature phase in flash-evaporated SnSe films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100176629 ◽

1990 ◽

Vol 48 (4) ◽

pp. 698-699

Author(s):

J.P.S. Hanjra

Keyword(s):

Thin Films ◽

Electrical Properties ◽

Energy Gap ◽

Dominant Role ◽

Fine Powder ◽

High Temperature Phase ◽

Temperature Phase ◽

Water Mixture ◽

Flash Evaporation ◽

Photovoltaic Applications

Tin mono selenide (SnSe) with an energy gap of about 1 eV is a potential material for photovoltaic applications. Various authors have studied the structure, electronic and photoelectronic properties of thin films of SnSe grown by various deposition techniques. However, for practical photovoltaic junctions the electrical properties of SnSe films need improvement. We have carried out investigations into the properties of flash evaporated SnSe films. In this paper we report our results on the structure, which plays a dominant role on the electrical properties of thin films by TEM, SEM, and electron diffraction (ED).Thin films of SnSe were deposited by flash evaporation of SnSe fine powder prepared from high purity Sn and Se, onto glass, mica and KCl substrates in a vacuum of 2Ø micro Torr. A 15% HF + 2Ø% HNO3 solution was used to detach SnSe film from the glass and mica substrates whereas the film deposited on KCl substrate was floated over an ethanol water mixture by dissolution of KCl. The floating films were picked up on the grids for their EM analysis.

Download Full-text

A New Deep Acceptor in Epitaxial Cubic SiC

MRS Proceedings ◽

10.1557/proc-162-495 ◽

1989 ◽

Vol 162 ◽

Author(s):

J. A. Freitas ◽

S. G. Bishop

Keyword(s):

Thin Films ◽

Vapor Deposition ◽

Chemical Vapor ◽

Excitation Intensity ◽

Acceptor Pair ◽

Deep Acceptor ◽

Intensity Dependence ◽

Pl Spectra ◽

Donor Acceptor ◽

Donor Acceptor Pair

ABSTRACTThe temperature and excitation intensity dependence of photoluminescence (PL) spectra have been studied in thin films of SiC grown by chemical vapor deposition on Si (100) substrates. The low power PL spectra from all samples exhibited a donor-acceptor pair PL band which involves a previously undetected deep acceptor whose binding energy is approximately 470 meV. This deep acceptor is found in every sample studied independent of growth reactor, suggesting the possibility that this background acceptor is at least partially responsible for the high compensation observed in Hall effect studies of undoped films of cubic SiC.

Download Full-text