Low-Cost Continuous-Wave Radar System Design for Detection of Human Respiration Rate

2019 ◽  
Author(s):  
Alvin Senjaya ◽  
Fitri Yuli Zulkifli
Keyword(s):  
System Design ◽  
Respiration Rate ◽  
Continuous Wave ◽  
Low Cost ◽  
Radar System ◽  
Wave Radar ◽  
Human Respiration

Concept and realization of a low-cost multi-target simulator for CW and FMCW radar system calibration and testing

2018 ◽  
Vol 10 (2) ◽  
pp. 207-215 ◽  
Author(s):  
Werner Scheiblhofer ◽  
Reinhard Feger ◽  
Andreas Haderer ◽  
Andreas Stelzer
Keyword(s):  
Continuous Wave ◽  
Doppler Radar ◽  
Dynamic Range ◽  
Low Cost ◽  
Intermediate Frequency ◽  
Radar System ◽  
Fmcw Radar ◽  
Radar Systems ◽  
Single Target ◽  
Wave Radar

AbstractWe present the realization of an frequency-modulated continuous-wave radar target simulator, based on a modulated-reflector radar system. The simulator, designed for the 24 GHz frequency band, uses low-cost modulated-reflector nodes and is capable to simultaneously generate multiple targets in a real-time environment. The realization is based on a modular approach and thus provides a high scalability of the whole system. It is demonstrated that the concept is able to simulate multiple artificial targets, located at user-selectable ranges and even velocities, utilized within a completely static setup. The characterization of the developed hardware shows that the proposed concept allows to dynamically and precisely adjust the radar cross-section of each single target within a dynamic range of 50 dB. Additionally, the provided range-proportional target frequency bandwidth makes the system perfectly suitable for fast and reliable intermediate frequency-chain calibration of multi-channel radar systems. Within this paper we demonstrate the application of the concept for a linear sweeped frequency-modulated continuous-wave radar. The presented approach is applicable to any microwave-based measurement system using frequency differences between transmit- and receive signals for range- and velocity evaluation, such as (non-)linear sweeped as well as pure Doppler radar systems.

scholarly journals A Local Oscillator Phase Compensation Technique for Ultra-Wideband Stepped-Frequency Continuous Wave Radar Based on a Low-Cost Software-Defined Radio

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 780
Author(s):  
Kazunori Takahashi ◽  
Takashi Miwa
Keyword(s):  
Software Defined Radio ◽  
Initial Phase ◽  
Continuous Wave ◽  
Low Cost ◽  
Local Oscillator ◽  
The Other ◽  
Ultra Wideband ◽  
Single Frequency ◽  
Wave Radar ◽  
Stepped Frequency

The paper discusses a way to configure a stepped-frequency continuous wave (SFCW) radar using a low-cost software-defined radio (SDR). The most of high-end SDRs offer multiple transmitter (TX) and receiver (RX) channels, one of which can be used as the reference channel for compensating the initial phases of TX and RX local oscillator (LO) signals. It is same as how commercial vector network analyzers (VNAs) compensate for the LO initial phase. These SDRs can thus acquire phase-coherent in-phase and quadrature (I/Q) data without additional components and an SFCW radar can be easily configured. On the other hand, low-cost SDRs typically have only one transmitter and receiver. Therefore, the LO initial phase has to be compensated and the phases of the received I/Q signals have to be retrieved, preferably without employing an additional receiver and components to retain the system low-cost and simple. The present paper illustrates that the difference between the phases of TX and RX LO signals varies when the LO frequency is changed because of the timing of the commencement of the mixing. The paper then proposes a technique to compensate for the LO initial phases using the internal RF loopback of the transceiver chip and to reconstruct a pulse, which requires two streaming: one for the device under test (DUT) channel and the other for the internal RF loopback channel. The effect of the LO initial phase and the proposed method for the compensation are demonstrated by experiments at a single frequency and sweeping frequency, respectively. The results show that the proposed method can compensate for the LO initial phases and ultra-wideband (UWB) pulses can be reconstructed correctly from the data sampled by a low-cost SDR.

scholarly journals A dataset of clinically recorded radar vital signs with synchronised reference sensor signals

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Sven Schellenberger ◽  
Kilin Shi ◽  
Tobias Steigleder ◽  
Anke Malessa ◽  
Fabian Michler ◽  
...  
Keyword(s):  
Continuous Monitoring ◽  
Continuous Wave ◽  
Vital Signs ◽  
Radar System ◽  
Tilt Table ◽  
Non Invasive ◽  
Impedance Cardiogram ◽  
Wave Radar ◽  
Reference Device ◽  
Sensor Signals

Abstract Using Radar it is possible to measure vital signs through clothing or a mattress from the distance. This allows for a very comfortable way of continuous monitoring in hospitals or home environments. The dataset presented in this article consists of 24 h of synchronised data from a radar and a reference device. The implemented continuous wave radar system is based on the Six-Port technology and operates at 24 GHz in the ISM band. The reference device simultaneously measures electrocardiogram, impedance cardiogram and non-invasive continuous blood pressure. 30 healthy subjects were measured by physicians according to a predefined protocol. The radar was focused on the chest while the subjects were lying on a tilt table wired to the reference monitoring device. In this manner five scenarios were conducted, the majority of them aimed to trigger hemodynamics and the autonomic nervous system of the subjects. Using the database, algorithms for respiratory or cardiovascular analysis can be developed and a better understanding of the characteristics of the radar-recorded vital signs can be gained.

Position estimation of lap joints for seam tracking applications at mm-wave frequencies

2013 ◽  
Vol 5 (3) ◽  
pp. 409-417 ◽  
Author(s):  
Jochen O. Schrattenecker ◽  
Andreas Haderer ◽  
Günther Reinthaler ◽  
Andreas Stelzer
Keyword(s):  
Continuous Wave ◽  
Lap Joints ◽  
Position Estimation ◽  
Radar System ◽  
Seam Tracking ◽  
Lap Joint ◽  
Scattering Model ◽  
Scattering Effects ◽  
Wave Radar ◽  
Field Integral

In this paper, we present the results of using a frequency-stepped continuous-wave radar system to estimate the position of overlapping and electrically good conductive plates. We especially focus on polarimetric scattering effects caused by the step of a lap joint, which is a common welding-geometry. To model the step's contribution to the overall scattered signal, we use a two-dimensional combined field integral equation (CFIE) approach. For demonstrating its practical applicability, the implemented scattering model is verified by measurements. To emphasize the improvements of position estimation by using a CFIE approach, the outcomes of the model are compared to a commonly used point scattering model. Finally, the numerical signal is utilized to precisely estimate the position of the lap joint.

scholarly journals Improved FMCW Radar System for Multi-Target Detection of Human Respiration Vital Sign

2019 ◽  
Vol 19 (2) ◽  
pp. 38
Author(s):  
Hana Pratiwi ◽  
Mujib R. Hidayat ◽  
A. A. Pramudita ◽  
Fiky Y. Suratman
Keyword(s):  
Target Detection ◽  
Continuous Wave ◽  
Beat Frequency ◽  
Radar System ◽  
Small Displacement ◽  
Phase Detection ◽  
Detection Capability ◽  
Fmcw Radar ◽  
Large Bandwidth ◽  
Human Respiration

Frequency Modulated Continuous Wave (FMCW) radar system has been developed and applied for various needs. Based on the conventional FMCW radar concept, a large bandwidth is needed to detect small displacements in the chest wall or abdomen related with respiratory activity. To overcome the need for large bandwidths in detecting vital respiratory signs, several improvements to the FMCW system are proposed in this paper. The phase-detection concept has been elaborated in improving the capability of FMCW to detect the small displacement. In developing multi-target detection capability, range detection capability through beat frequency output needs to be combined with the phase-detection method. Theoretical and simulation studies were performed to investigate the concept of combining range detection and phase detection for detecting respiration on multi-target. The results show that the proposed method is well-performed in detecting the multi-target respiration in high noise reflection.

A 34 to 36 GHz Vector Modulator for Reflected Power Canceller Techniques in LFMCW Radar

2010 ◽  
Vol 40-41 ◽  
pp. 283-286
Author(s):  
Min Zhang ◽  
Jun Xu ◽  
Xin Kai Cheng
Keyword(s):  
Theoretical Model ◽  
Theoretical Analysis ◽  
Millimeter Wave ◽  
High Performance ◽  
Continuous Wave ◽  
Low Cost ◽  
Wave Radar ◽  
Vital Component ◽  
Vector Modulator ◽  
Reflected Power

In this paper, a 34 to 36 GHz vector modulator for using in low cost and high performance RPC (Reflected Power Canceller) is presented. The key circuit consists of two push-pull (bi-phase) attenuators arranged in phase quadrature and a 3dB quadrature coupler (branch line couplers but not Lange couplers which is different from traditional circuits in Ka band) and a Wilkinson combiner, and then transition from micro-strip to waveguide using antipodal finline. To fully exploit this circuit’s capacity to generate accurate constellations at millimeter-wave frequencies, a generalized theoretical analysis of the (push-pull) vector modulator is presented. Based on the theoretical model and the measured results, the I-Q (push-pull) vector modulator promises to be a vital component for the realization of reflected power canceller in LFMCW (Linear Frequency Modulated Continuous Wave) radar.

Sign in / Sign up

Export Citation Format

Share Document