scholarly journals Performance of Commercial Off-the-Shelf Microelectromechanical Systems Sensors in a Pulsed Reactor Environment

Author(s):  
Keith E. Holbert ◽  
A. Sharif Heger ◽  
Steven S. McCready
2000 ◽  
Author(s):  
Reza Ghaffarian

Abstract During the last decade, research and development of microelectromechanical systems (MEMS) has shown a significant promise for a variety of commercial applications including automobile and medical purposes. For example, accelerometers are widely used for air bag in automobile and pressure sensors for various industrial applications. Some of the MEMS devices have potential to become the commercial-off-the-shelf (COTS) components. While high reliability/harsh environmental applications including aerospace require much more sophisticated technology development, they would achieve significant cost savings if they could utilize COTS components in their systems. This paper reviews the current status of IC and MEMS packaging technology with emphasis on reliability, compares the norm for IC packaging reliability evaluation and identifies challenges for development of reliability methodologies for MEMS, and finally proposes the use of COTS MEMS in order to start generating statistically meaningful reliability data as a vehicle for future standardization of reliability test methodology for MEMS packaging.


1996 ◽  
Vol 444 ◽  
Author(s):  
Hyeon-Seag Kim ◽  
D. L. Polla ◽  
S. A. Campbell

AbstractThe electrical reliability properties of PZT (54/46) thin films have been measured for the purpose of integrating this material with silicon-based microelectromechanical systems. Ferroelectric thin films of PZT were prepared by metal organic decomposition. The charge trapping and degradation properties of these thin films were studied through device characteristics such as hysteresis loop, leakage current, fatigue, dielectric constant, capacitancevoltage, and loss factor measurements. Several unique experimental results have been found. Different degradation processes were verified through fatigue (bipolar stress), low and high charge injection (unipolar stress), and high field stressing (unipolar stress).


2006 ◽  
Vol 4 ◽  
pp. 288-305
Author(s):  
A.B. Migranov

The article deals with the issues related to the construction of microelectromechanical systems (MEMS), and the problems arising from their manufacture. Particular attention is paid to micromechanical parts of robot, which were developed by methods of semi-simulation using the virtual environment for designing, testing and debugging MEMS.


Sign in / Sign up

Export Citation Format

Share Document