Steady-State and Small-Signal Analysis of High-Voltage Gain Half-Bridge Switched Boost Inverter

2016 ◽  
Vol 63 (6) ◽  
pp. 3546-3553 ◽  
Author(s):  
Ebrahim Babaei ◽  
Elias Shokati Asl ◽  
Mohsen Hasan Babayi
Keyword(s):  
Steady State ◽  
High Voltage ◽  
Signal Analysis ◽  
Small Signal ◽  
Voltage Gain ◽  
Small Signal Analysis ◽  
High Voltage Gain

scholarly journals High Step-up Coupled Inductor Inverters Based on qSBIs

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 3032 ◽  
Author(s):  
Hongchen Liu ◽  
Xi Su ◽  
Junxiong Wang
Keyword(s):  
Steady State ◽  
High Voltage ◽  
Low Voltage ◽  
Duty Ratio ◽  
Voltage Gain ◽  
Passive Components ◽  
Steady State Analysis ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Working Principle

In this paper, two types of high step-up coupled inductor inverters based on qSBIs (quasi- switched boost inverters) are proposed. By applying the coupled inductor to the qSBIs, the voltage gain of the proposed inverter is regulated by turn ratio and duty ratio. Thus, a high voltage gain can be achieved without the circuits operating at the extreme duty cycle by choosing a suitable turn ratio of the coupled inductor. In addition, the proposed circuits have the characteristics of continuous input current and low voltage stress across the passive components. A boost unit can be added to the proposed inverters for further improvement of the voltage gain. In this paper, the working principle, steady state analysis, and the comparisons of the proposed inverter with other impedance-source inverters are described. A 200 W prototype was created and the experimental results confirm the correctness of the analysis in this paper.

Improved Small-Signal Analysis for Circuits Working in Periodic Steady State

2010 ◽  
Vol 57 (2) ◽  
pp. 427-437 ◽  
Author(s):  
A. Brambilla ◽  
G. Gruosso ◽  
M.A. Redaelli ◽  
G.S. Gajani ◽  
D.D. Caviglia
Keyword(s):  
Steady State ◽  
Signal Analysis ◽  
Small Signal ◽  
Small Signal Analysis ◽  
Periodic Steady State

scholarly journals Small-signal analysis of a single-stage bridgeless boost half-bridge AC/DC converter with bidirectional switch

2021 ◽  
Vol 12 (4) ◽  
pp. 2358
Author(s):  
Mohamad Affan Bin Mohd Noh ◽  
Mohd Rodhi Bin Sahid ◽  
Thang Ka Fei ◽  
Ravi Lakshmanan
Keyword(s):  
Steady State ◽  
Signal Analysis ◽  
Circuit Simulation ◽  
Single Stage ◽  
Small Signal ◽  
Large Signal ◽  
Signal Model ◽  
Matlab Simulink ◽  
Small Signal Analysis ◽  
Small Signal Model

A small-signal analysis of a single-stage bridgeless boost half-bridge alternating current/direct current (AC/DC) Converter with bidirectional switches is performed using circuit averaging method. The comprehensive approach to develop the small signal model from the steady state analysis is discussed. The small-signal model is then simulated with MATLAB Simulink. The small-signal model is verified through the comparison of the bode-plot obtained from MATLAB Simulink and the simulated large signal model in piecewise linear electrical circuit simulation (PLECS). The mathematical model obtain from the small-signal analysis is then used to determine the proportional gain K_p and integral gain K_i. In addition, the switch large-signal model is developed by considering the current and voltage waveforms during load transients and steady-state conditions.

scholarly journals Steady-State and Small-Signal Analysis of A-Source Converter

2018 ◽  
Vol 33 (8) ◽  
pp. 7118-7131 ◽  
Author(s):  
Agasthya Ayachit ◽  
Yam P. Siwakoti ◽  
Veda Prakash Nagabhushana Galigekere ◽  
Marian K. Kazimierczuk ◽  
Frede Blaabjerg
Keyword(s):  
Steady State ◽  
Signal Analysis ◽  
Small Signal ◽  
Small Signal Analysis

scholarly journals Design and Implementation of a High Step-Up DC-DC Converter Based on the Conventional Boost and Buck-Boost Converters with High Value of the Efficiency Suitable for Renewable Application

2021 ◽  
Vol 13 (19) ◽  
pp. 10699
Author(s):  
Tohid Rahimi ◽  
Md Rabiul Islam ◽  
Hossein Gholizadeh ◽  
Saeed Mahdizadeh ◽  
Ebrahim Afjei
Keyword(s):  
Duty Cycle ◽  
Signal Analysis ◽  
High Efficiency ◽  
Switching Frequency ◽  
Small Signal ◽  
Voltage Gain ◽  
Boost Converters ◽  
Small Signal Analysis ◽  
Current Voltage ◽  
Input Filter

This paper introduces a novel topology of the proposed converter that has these merits: (i) the topology of the converter is based on conventional boost and buck-boost converters, which has caused its simplicity; (ii) the voltage gain of the converter has provided higher values by the lower value of the duty cycle; (iii) due to the use of high-efficiency conventional topologies in its structure, the efficiency of the converter keeps its high value for a great interval of duty cycle; (iv) besides the increase of the voltage gain, the current/voltage stresses of the semiconductors have been kept low; (v) the continuous input current of this converter reduces the current stress of the capacitor in the input filter. It is worth noting that the proposed converter has been discussed in both ideal and non-ideal modes. Moreover, the operation of the converter has been discussed in both continuous/discontinuous current modes. The advantages of the converter have been compared with recently suggested converters. In addition, the different features of the converter have been discussed for different conditions. In the small-signal analysis, the appropriate compensator has been designed. Finally, the simulation and experimental results have been reported for 90 W output power, 90 V output voltage, 3-times voltage gain, and 100 kHz switching frequency.

scholarly journals Analysis of Steady-State Characteristics for a Newly Designed High Voltage Gain Switched Inductor Z-Source Inverter

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 940 ◽  
Author(s):  
Nafis Subhani ◽  
Ramani Kannan ◽  
Md. Apel Mahmud ◽  
Tushar Kanti Roy ◽  
Mohd Fakhizan Romlie
Keyword(s):  
Steady State ◽  
High Voltage ◽  
Common Ground ◽  
Experimental Studies ◽  
Voltage Source ◽  
Duty Ratio ◽  
Voltage Gain ◽  
Soft Start ◽  
High Voltage Gain ◽  
Boost Factor

This paper aims to develop a new switched inductor assisted strong boost Z-source inverter (SL-SBZSI) topology with high voltage gain and analyze the steady-state characteristics of the proposed topology. In the proposed topology, two switched inductors are used within the series impedance structure of the Z-source inverter (ZSI) in order to achieve the high voltage gain. The steady-state characteristics of the proposed topology are analyzed to disseminate its several advantages as compared to traditional ZSIs. The key advantages include the higher boost factor with lower shoot-through duty ratio and lower voltage stresses on capacitors as well as on switches of the inverter bridge. Furthermore, the proposed topology has the soft-start ability which significantly reduces the inrush start-up current while comparing with the traditional ZSI. In the proposed topology, a common ground is shared between the output AC voltage and the input DC voltage source which categorizes this topology to the doubly grounded inverter. The characteristics of the proposed SL-SBZSI are analyzed by considering two operating condition where the simple boost pulse width modulation (PWM) scheme is used to extract the shoot-through pulses. The characteristics of the proposed topology are also compared with different existing topologies along with the conventional modified capacitor assisted Z-source inverter (MCA-ZSI), whose boost factor is much closer to the proposed topology. Rigorous mathematical analyses are presented to clearly demonstrate the benefits of the proposed topology while simulation studies are carried out to demonstrate its distinct features as compared to the existing topology. Finally, experimental studies are conducted to further validate the theoretical and simulation results.

Sign in / Sign up

Export Citation Format

Share Document