Electron-Beam-Induced Currents in Simple Device Structures

1976 ◽  
Vol 12 (3) ◽  
pp. 231-236 ◽  
Author(s):  
K. Galloway ◽  
K. Leedy ◽  
W. Keery
1988 ◽  
Vol 49 (C4) ◽  
pp. C4-607-C4-614
Author(s):  
R. J. MALIK ◽  
A. F.J. LEVI ◽  
B. F. LEVINE ◽  
R. C. MILLER ◽  
D. V. LANG ◽  
...  

1996 ◽  
Vol 427 ◽  
Author(s):  
A. E Bair ◽  
T. L. Alford ◽  
Z. Atzmon ◽  
S. D. Marcus ◽  
D. C. Doller ◽  
...  

AbstractShallow contact metallization of SiGeC was studied in anticipation of this alloys use in low power applications. It has been shown that in the solid state reaction of Co on (100) Si, that Co is the moving species with proper annealing conditions. This prevents the formation of Kirkendal voiding in certain device structures. This work studies the Co and Ti metallization of SiGeC. A bilayer of 44 nm of Co on 7 nm of Ti, were electron beam evaporated onto epitaxially grown Si0.77Ge0.21C0.02. The samples were rapid thermal processed at 600 and 900 °C for up to two minutes in a nitrogen ambient. The analysis techniques used were Rutherford backscattering spectrometry which included the used of the 4.27 MeV 12C(α,α) 12C resonance reaction, glancing angle x-ray diffraction, During annealing at all temperatures, Co diffused through the Ti layer and formed CoSi. This phase was confirmed by x-ray diffraction. The Co displaced the Ti to the surface. At 600 °C, Ge diffused to the surface layer, while at 900 °C it was rejected back into the original SiGeC. The sample annealed at 600 °C was subsequently annealed at 900 °C. The Ge in the surface layer was rejected from the surface layer, diffused across the CoSi and back into the SiGeC.


2002 ◽  
Vol 738 ◽  
Author(s):  
Ralf Heiderhoff ◽  
Ingo Joachimsthaler ◽  
Ludwig J. Balk

ABSTRACTSPM/SEM-hybridsystems are more than only a combination of complementary microscopy techniques, because the used probes can simultaneously either be used as sensors, which give access to a vast variety of material properties, or as actuators, which can deliberately modify samples properties. The wide application field as well as flexibility is demonstrated exemplarily on techniques in microanalyses like nano-probing, cathodoluminescence, electron beam induced currents, and thermal analyses. These results provide an interesting perspective with respect to failure analyses and reliability of modern materials and devices.


2007 ◽  
Vol 515 (15) ◽  
pp. 6163-6167 ◽  
Author(s):  
Robert Kniese ◽  
Michael Powalla ◽  
Uwe Rau

2021 ◽  
Vol 12 (2) ◽  
pp. 108-116
Author(s):  
R. I. Vorobey ◽  
O. K. Gusev ◽  
A. L. Zharin ◽  
K. U. Pantsialeyeu ◽  
A. I. Svistun ◽  
...  

One of the ways to solve multiple problems of optical diagnostics is to use photovoltaic converters based on semiconductors with intrinsic photoconductivity slightly doped with deep impurities which form several energy levels with different charge states within the semiconductor′s bandgap. Peculiarities of physical processes of recharging these levels make it possible to construct photodetectors with different functionality based on a range of simple device structures.The aim of this work is to analyze peculiarities of conversion characteristics of single-element photovoltaic converters based on semiconductors with intrinsic photoconductivity, to systematize their properties and to represent structures of photovoltaic convertors as a device structures suitable for implementation in measurement transducers of optical diagnostics systems.Based on the analysis of the characteristics of the conversion characteristics of single-element photovoltaic converters based on semiconductors with intrinsic photoconductivity and the requirements for their design, a dash series of photovoltaic converters was developed for use in the measuring transducers of optical diagnostics systems. The possibility of constructing functional measuring transducers for multiparameter measurements of optical signals is shown.


1988 ◽  
Author(s):  
R. J. Malik ◽  
A. F. J. Levi ◽  
B. F. Levine ◽  
R. C. Miller ◽  
D. V. Lang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document