This paper presents the design and implementation of an RF energy harvester system at 5.8[Formula: see text]GHz for low-power wireless transmission applications. The potential application of the proposed system is to wirelessly power sensor nodes. First, a design methodology of the rectifier based on a theoretical approach is presented. The simulation results show an excellent correlation with the theoretical ones, proving the accuracy of the proposed design methodology. A prototype is fabricated and the simulation results are validated by the measurements. Then, the rectenna is combined to a commercial power management circuit and a load which emulates the behavior of a sensor. The power management circuit boosts and regulates the output DC voltage as well as stores the collected energy into a capacitor. Finally, the complete system is experimentally tested and excellent performances are demonstrated. The efficiency of the RF energy harvester is 24% at [Formula: see text]10[Formula: see text]dBm input power and 47% at [Formula: see text]5[Formula: see text]dBm input power which are the highest reported measured efficiencies at this frequency and at those power levels. The complete rectenna system is able to harvest 4.62[Formula: see text]mJ in 40 s and 192[Formula: see text]s for [Formula: see text]6[Formula: see text]dBm and [Formula: see text]10[Formula: see text]dBm input power, respectively allowing us to power wirelessly low-power electronic devices.
Evaluation of RF Wireless Power Transfer for Low-Power Aircraft Sensors