Differentiation between fresh and frozen‐thawed scallop adductor muscle as raw materials for sashimi during cold storage

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Download Full-text

Crystallization of barium hexaferrite

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100122216 ◽

1992 ◽

Vol 50 (1) ◽

pp. 362-363

Author(s):

Chung-kook Lee ◽

Yolande Berta ◽

Robert F. Speyer

Keyword(s):

Size Distribution ◽

Raw Materials ◽

Barium Hexaferrite ◽

Recording Media ◽

Magnetic Recording Media ◽

Promising Candidate ◽

Crystallization Method ◽

Temperature Heat ◽

High Density Magnetic Recording ◽

Temperature Heat Treatment

Barium hexaferrite (BaFe12O19) is a promising candidate for high density magnetic recording media due to its superior magnetic properties. For particulate recording media, nano-sized single crystalline powders with a narrow size distribution are a primary application requirement. The glass-crystallization method is preferred because of the controllability of crystallization kinetics, hence, particle size and size distribution. A disadvantage of this method is the need to melt raw materials at high temperatures with non-reactive crucibles, e.g. platinum. However, in this work, we have shown that crystal growth of barium hexaferrite occurred during low temperature heat treatment of raw batches.

Download Full-text

Structural integrity after cold storage of human epidermal model in hypothermosol: A correlative ultrastructural and fluorescent assay

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100169080 ◽

1994 ◽

Vol 52 ◽

pp. 270-271

Author(s):

Henry H. Eichelberger ◽

John G. Baust ◽

Robert G. Van Buskirk

Keyword(s):

Cold Storage ◽

Structural Integrity ◽

Culture Media ◽

Cell Structure ◽

Natural State ◽

Sodium Cacodylate ◽

Ruthenium Tetroxide ◽

Cacodylate Buffer ◽

Before And After

For research in cell differentiation and in vitro toxicology it is essential to provide a natural state of cell structure as a benchmark for interpreting results. Hypothermosol (Cryomedical Sciences, Rockville, MD) has proven useful in insuring the viability of synthetic human epidermis during cold-storage and in maintaining the epidermis’ ability to continue to differentiate following warming.Human epidermal equivalent, EpiDerm (MatTek Corporation, Ashland, MA) consisting of fully differentiated stratified human epidermal cells were grown on a microporous membrane. EpiDerm samples were fixed before and after cold-storage (4°C) for 5 days in Hypothermosol or skin culture media (MatTek Corporation) and allowed to recover for 7 days at 37°C. EpiDerm samples were fixed 1 hour in 2.5% glutaraldehyde in sodium cacodylate buffer (pH 7.2). A secondary fixation with 0.2% ruthenium tetroxide (Polysciences, Inc., Warrington, PA) in sodium cacodylate was carried out for 3 hours at 4°C. Other samples were similarly fixed, but with 1% Osmium tetroxide in place of ruthenium tetroxide. Samples were dehydrated through a graded acetone series, infiltrated with Spurrs resin (Polysciences Inc.) and polymerized at 70°C.

Download Full-text