Evaluating the self-initialization procedure for large-scale ecosystem models

2006 ◽  
Vol 12 (9) ◽  
pp. 1658-1669 ◽  
Author(s):  
STEPHAN A. PIETSCH ◽  
HUBERT HASENAUER
2013 ◽  
pp. 116-123
Author(s):  
Claire Bompaire-Evesque

This article is a inquiry about how Barrès (1862-1923) handles the religious rite of pilgrimage. Barrès stages in his writings three successive forms of pilgrimage, revealing what is sacred to him at different times. The pilgrimage to a museum or to the birthplace of an artist is typical for the egotism and the humanism of the young Barrès, expressed in the Cult of the Self (1888-1891). After his conversion to nationalism, Barrès tries to unite the sons of France and to instill in them a solemn reverence for “the earth and the dead” ; for that purpose he encourages in French Amities (1903) pilgrimages to historical places of national importance (battlefields; birthplace of Joan of Arc), building what Nora later called the Realms of Memory. The third stage of Barrès’ intellectual evolution is exemplified by The Sacred Hill (1913). In this book the writer celebrates the places where “the Spirit blows”, and proves open to a large scale of spiritual forces, reaching back to paganism and forward to integrative syncretism, which aims at unifying “the entire realm of the sacred”.


2014 ◽  
Vol 5 ◽  
pp. 1203-1209 ◽  
Author(s):  
Hind Kadiri ◽  
Serguei Kostcheev ◽  
Daniel Turover ◽  
Rafael Salas-Montiel ◽  
Komla Nomenyo ◽  
...  

Our aim was to elaborate a novel method for fully controllable large-scale nanopatterning. We investigated the influence of the surface topology, i.e., a pre-pattern of hydrogen silsesquioxane (HSQ) posts, on the self-organization of polystyrene beads (PS) dispersed over a large surface. Depending on the post size and spacing, long-range ordering of self-organized polystyrene beads is observed wherein guide posts were used leading to single crystal structure. Topology assisted self-organization has proved to be one of the solutions to obtain large-scale ordering. Besides post size and spacing, the colloidal concentration and the nature of solvent were found to have a significant effect on the self-organization of the PS beads. Scanning electron microscope and associated Fourier transform analysis were used to characterize the morphology of the ordered surfaces. Finally, the production of silicon molds is demonstrated by using the beads as a template for dry etching.


2018 ◽  
Vol 857 ◽  
pp. 907-936 ◽  
Author(s):  
A. Cimarelli ◽  
A. Leonforte ◽  
D. Angeli

The separating and reattaching flows and the wake of a finite rectangular plate are studied by means of direct numerical simulation data. The large amount of information provided by the numerical approach is exploited here to address the multi-scale features of the flow and to assess the self-sustaining mechanisms that form the basis of the main unsteadinesses of the flows. We first analyse the statistically dominant flow structures by means of three-dimensional spatial correlation functions. The developed flow is found to be statistically dominated by quasi-streamwise vortices and streamwise velocity streaks as a result of flow motions induced by hairpin-like structures. On the other hand, the reverse flow within the separated region is found to be characterized by spanwise vortices. We then study the spectral properties of the flow. Given the strongly inhomogeneous nature of the flow, the spectral analysis has been conducted along two selected streamtraces of the mean velocity field. This approach allows us to study the spectral evolution of the flow along its paths. Two well-separated characteristic scales are identified in the near-wall reverse flow and in the leading-edge shear layer. The first is recognized to represent trains of small-scale structures triggering the leading-edge shear layer, whereas the second is found to be related to a very large-scale phenomenon that embraces the entire flow field. A picture of the self-sustaining mechanisms of the flow is then derived. It is shown that very-large-scale fluctuations of the pressure field alternate between promoting and suppressing the reverse flow within the separation region. Driven by these large-scale dynamics, packages of small-scale motions trigger the leading-edge shear layers, which in turn created them, alternating in the top and bottom sides of the rectangular plate with a relatively long period of inversion, thus closing the self-sustaining cycle.


2018 ◽  
Vol 611 ◽  
pp. A83 ◽  
Author(s):  
Fabien Lacasa ◽  
Marcos Lima ◽  
Michel Aguena

Super-sample covariance (SSC) is the dominant source of statistical error on large scale structure (LSS) observables for both current and future galaxy surveys. In this work, we concentrate on the SSC of cluster counts, also known as sample variance, which is particularly useful for the self-calibration of the cluster observable-mass relation; our approach can similarly be applied to other observables, such as galaxy clustering and lensing shear. We first examined the accuracy of two analytical approximations proposed in the literature for the flat sky limit, finding that they are accurate at the 15% and 30–35% level, respectively, for covariances of counts in the same redshift bin. We then developed a harmonic expansion formalism that allows for the prediction of SSC in an arbitrary survey mask geometry, such as large sky areas of current and future surveys. We show analytically and numerically that this formalism recovers the full sky and flat sky limits present in the literature. We then present an efficient numerical implementation of the formalism, which allows fast and easy runs of covariance predictions when the survey mask is modified. We applied our method to a mask that is broadly similar to the Dark Energy Survey footprint, finding a non-negligible negative cross-z covariance, i.e. redshift bins are anti-correlated. We also examined the case of data removal from holes due to, for example bright stars, quality cuts, or systematic removals, and find that this does not have noticeable effects on the structure of the SSC matrix, only rescaling its amplitude by the effective survey area. These advances enable analytical covariances of LSS observables to be computed for current and future galaxy surveys, which cover large areas of the sky where the flat sky approximation fails.


2012 ◽  
Vol 160 ◽  
pp. 64-68
Author(s):  
Hui Fang Xue ◽  
You Wang

Based on the vibration problem of the plane gate in the inverted siphon exit of a large-scale hydraulic project in northern Xinjiang, the software ANSYS is used to build the entity model and finite element model. Considering the influence of fluid-solid coupling, the self-vibration characteristics of the gate in the water and without water are analyzed. The first six self-vibration frequencies and vibration modes of the gate are calculated. The results show that the height of water has a significant impact on the self-vibration frequencies of the plane gate. The first order natural frequency on the condition of small opening is decreased by 28.5%. It shows that the structure of the plane gate must be improved.


Author(s):  
David C. Schak

The level of civility is much higher in Taiwan and in China, something Chinese visitors to Taiwan readily acknowledge and regard as owing to Taiwan having preserved traditional Chinese culture. However, prior to 1990, Taiwan’s state of civility was similar to that in China. This chapter traces how Taiwan made this transition and argues that it was accompanied by Taiwan’s evolving from a plethora of small, inward-looking communities to a society with a unified identity based on a civil nationalism, a society in itself to a society for itself. This came about through a combination of political struggles, economic development and rural-urban migration, and the self-help movements (zili jiuji) of the 1980s. Manifest changes in civil behavior began with Taiwan’s democratization. Some aspects of the increase in civility, e.g. driver behavior, were helped along by rule enforcement, some by the demonstration effect of a large-scale public philanthropic project, and some simply by people putting into practice what they had been taught in school. Taiwan has high levels of philanthropy and voluntarism an many charity-focused civil society groups


2020 ◽  
Vol 4 (8) ◽  
pp. 2409-2417
Author(s):  
Mengfan Wu ◽  
Chuyan Zhang ◽  
Fujing Wei ◽  
Huifang An ◽  
Xiaqing Wang ◽  
...  

This is the first time that a hydrogel interface has been used as an assembly interface for the self-assembly of photonic crystals with excellent performances.


Sign in / Sign up

Export Citation Format

Share Document