Long-term effects of magnetron-sputtered calcium phosphate coating on osseointegration of dental implants in non-human primates

2009 ◽  
Vol 20 (2) ◽  
pp. 183-188 ◽  
Author(s):  
Fügl Alexander ◽  
Ulm Christian ◽  
Tangl Stefan ◽  
Vasak Christoph ◽  
Gruber Reinhard ◽  
...  
2013 ◽  
Vol 17 (1) ◽  
pp. 186-198 ◽  
Author(s):  
Karoline Pardun ◽  
Laura Treccani ◽  
Eike Volkmann ◽  
Giovanni Li Destri ◽  
Giovanni Marletta ◽  
...  

2021 ◽  
Vol 27 (1) ◽  
pp. 37-52
Author(s):  
A. V. Popkov ◽  
N. A. Kononovich ◽  
E. N. Gorbach ◽  
D. A. Popkov

Background. The problem of replacing extensive bone defects remains relevant. The use of implant structures with bioactive properties can stimulate osteogenesis, which will improve the final treatment result.The aim of the study. In an in vivo experiment, to study the possibility of replacing an extensive defect in the bone diaphysis with a personal bioactive cellular 3D implant and evaluate the long-term results of its use.Materials and Methods. In an in vivo experiment, adult large mongrel dogs (n = 8) were modeled with an extensive segmental defect of the tibial diaphysis measuring 4 cm. The defect was replaced with a cellular bioactive 3D implant made of titanium alloy Ti6Al4V, manufactured using the additive technology. The diameter of the cells was 1.5 mm on average. The walls of the implant had pores of 100– 300 μm in size. The inner and outer surfaces were coated with a calcium phosphate layer formed by micro-arc oxidation. The primary fixation was provided with the Ilizarov apparatus. In the early postoperative period, antibiotic prophylaxis with broad-spectrum drugs was performed. Clinical, X-ray, histological and statistical methods were used to analyze the results. The main control points were considered: the end of external fixation with the Ilizarov apparatus, after 180 days and 1 year after the termination of external fixation.Results. During the experiment, the death of animals and complications were not observed. The spatial location of the implant was preserved. The formation of a strong bone-implantation block occurred 37.2±6.3 days after the operation. During this period, the external fixation apparatus was dismantled. Osseointegration was provided under conditions of sufficient primary mechanical stability, due to the cellular structure of the implant, the presence of pores on its walls, and the osteoinductive properties of the applied calcium phosphate coating. The achieved degree of osseointegration persisted in long-term periods (6 months and 1 year after the termination of external fixation). The osteoinductive properties of the calcium phosphate coating were confirmed by the expression of osteopontin cells at all stages of the experiment. Outflow of Ca and P from bone fragments was not observed. An elastic sheath was formed on the surface of the implant, similar in structure to the periosteum. The implant cells were filled with a well-vascularized bone substrate. In the projection of the intermediate zone, compact bone tissue was formed, and in the projection of the medullary canal — reticulofibrous bone marrow. This indicates the possibility of organotypic remodeling of bone structures inside the implant.Conclusion. The results of the study showed the effectiveness of using a bioactive cellular 3D implant to replace an extensive defect in the shaft of the bone. The architectonics and osteoinductive properties of the implant surface contributed to the formation of complete osseointegration in a short time, while maintaining the achieved result in long-term periods.


2009 ◽  
Vol 631-632 ◽  
pp. 211-216 ◽  
Author(s):  
Kyosuke Ueda ◽  
Takayuki Narushima ◽  
Takashi Goto ◽  
T. Katsube ◽  
Hironobu Nakagawa ◽  
...  

Calcium phosphate coating films were fabricated on Ti-6Al-4V plates and screw-type implants with a blast-treated surface using radiofrequency (RF) magnetron sputtering and were evaluated in vitro and in vivo. Amorphous calcium phosphate (ACP) and oxyapatite (OAp) films obtained in this study could cover the blast-treated substrate very efficiently, maintaining the surface roughness. For the in vitro evaluations of the calcium phosphate coating films, bonding strength and alkaline phosphatase (ALP) activity were examined. The bonding strength of the coating films to a blast-treated substrate exceeded 60 MPa, independent of film phases except for the film after post-heat-treatment in silica ampoule. When compared with an uncoated substrate, the increase in the ALP activity of osteoblastic SaOS-2 cells on a calcium phosphate coated substrate was confirmed by a cell culture test. The removal torque of screw-type Ti-6Al-4V implants with a blast-treated surface from the femur of Japanese white rabbit increased with the duration of implantation and it was statistically improved by coating an ACP film 2 weeks after implantation. The in vitro and in vivo studies suggested that the application of the sputtered ACP film as a coating on titanium implants was effective in improving their biocompatibility with bones.


2007 ◽  
Vol 361-363 ◽  
pp. 907-910
Author(s):  
Marco A. Lopez-Heredia ◽  
Borhane H. Fellah ◽  
Paul Pilet ◽  
C. Leroux ◽  
M. Dorget ◽  
...  

Porous Titanium Scaffolds were produced by using a rapid prototyping technique. These scaffolds were either coated or not with a calcium phosphate coating via an eletrodeposition method. Rat bone marrow mesenchymal stem cells were cultured on the scaffolds at a density of 106 cells/scaffold for a period of 3 days. Cell proliferation was measured by using the Alamar Blue assay. The scaffolds were observed by SEM and polarized light microscopy. Constructs were then implanted subcutaneously for 4 weeks in syngenic rats. Cells proliferated well after seeding. After subcutaneous implantation, histology and SEM revealed the presence of uniform coatings as well as Ca and P deposits in the non-coated scaffolds suggesting mineralization.


2021 ◽  
Vol 13 (1) ◽  
pp. 10-19
Author(s):  
Chun-Yan Zhang ◽  
Hao-Lan Fang ◽  
Xin-Peng Liu ◽  
Fan-Cheng Meng ◽  
Zhong-Qing Tian ◽  
...  

In order to explore the hydrothermal growth mechanism of hydroxyapatite (HA) coating on fluorinated magnesium alloy, the changes of morphology, composition and crystal phase of the calcium phosphate coating during the hydrothermal treatment were studied. And the change of electrochemical impedance spectroscopy (EIS) of the coating specimen of different hydrothermal treatment time was discussed to further understanding the change of the coating structure. The results demonstrated that calcium phosphate could rapidly nucleate on fluorinated AZ31 magnesium alloy. The crystal phase of calcium phosphate coating was mainly octacalcium phosphate (OCP) at the early stage of hydrothermal treatment. Then the content of OCP decreased and the content of HA increased with hydrothermal time. The coating consisted of only HA after hydrothermal treatment for about 4h. The HA coating composed of rod-like crystals exhibited an obvious double layer structure. The rod-like crystals of inner layer arranged into dense bundles and the rod-like crystals of outer layer arranged into loose chrysanthemum-like clusters. Fluoride conversion layer acted as an intermediate transition layer to connect magnesium alloy and HA coating into a whole. The results of immersion test in simulated body fluid demonstrated that HA crystals dissolved slowly. No peeling occurred of HA coating during the 12 days' immersion. Pitting corrosion was still the mainly corrosion mode of magnesium alloy substrate due to the electrolyte infiltration during the immersion.


2011 ◽  
Vol 410 (1) ◽  
pp. 7-12 ◽  
Author(s):  
Tatsuya Miyazaki ◽  
Satoshi Miyauchi ◽  
Takahisa Anada ◽  
Hideki Imaizumi ◽  
Osamu Suzuki

Sign in / Sign up

Export Citation Format

Share Document