Effect of post-space treatments on the push-out bond strength and failure modes of glass fibre posts

2010 ◽  
Vol 39 (1) ◽  
pp. 19-24 ◽  
Author(s):  
Hacer Deniz Arısu ◽  
Bağdagül Helvacıoğlu Kıvanç ◽  
Baran C. Sağlam ◽  
Eser Şimşek ◽  
Güliz Görgül
Keyword(s):  
Bond Strength ◽  
Glass Fibre ◽  
Failure Modes ◽  
Post Space ◽  
Glass Fibre Posts ◽  
Push Out

scholarly journals Evaluation of Bond Strength of Aesthetic Type of Posts at Different Regions of Root Canal after Application of Adhesive Resin Cement

2019 ◽  
Vol 7 (13) ◽  
pp. 2167-2172
Author(s):  
Mahmoud N. M. Allabban ◽  
Salah A. Youssef ◽  
Ali Abkar Mohammed Nejri ◽  
Mohamed A. A. Qudaih
Keyword(s):  
Bond Strength ◽  
Glass Fibre ◽  
Root Canal ◽  
Failure Modes ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Luting Agent ◽  
Adhesive Resin Cement ◽  
Glass Fibre Posts ◽  
Push Out

AIM: This study aimed to evaluate the bond strength between esthetic posts and dentin at different regions of the root canal in passive mode or push-out active mode. METHODS: Twenty extracted human bicuspid single canal teeth were used in this study. Teeth were sectioned below the cement-enamel junction. The roots of teeth were endodontically treated. Glass fibre posts (Glassix plus, Harald Nordin SA, Switzerland) and zirconia posts (Zirix, Harald Nordin) were then adhesively luted with total-etch (Variolink N, Ivoclar Vivadent, Schaan, Liechtenstein) and self-adhesive (Multilink Speed, Ivoclar Vivadent) resin cement. The roots were divided into two main groups of 10 samples each, according to the type of post used. Each group subdivided into 2 subgroups of 5 samples each, according to the type of cement used. The specimens were transversally sectioned into three slices of 2 mm thickness to perform the push-out test. The push-out tests were performed at crosshead-speed, 0.5 mm/min). Failure modes were evaluated using a scanning electron microscope at magnification (x 150). RESULTS: The results revealed that push-out bond strengths were significantly affected by the type of luting agent and the type of post (P ≤ 0 .05). The mean push-out bond strength values for fibre post were significantly higher than those for zirconia post independent of the luting strategy used. The score values of total-etch adhesive resin cement were higher than those for self-adhesive resin cement irrespective of other variables. Regarding the effect of the root segment on push-out bond strength, results revealed that bond strength decreased from the coronal to the apical section. The cement-dentin interface found to be the weakest part of the root-cement-post unit. CONCLUSION: Glass fibre posts revealed better results in all root third when they adhesively luted with total-etch or self-etch adhesive resin cement and provided significantly increased bond strength compared to the zirconia posts.

scholarly journals Effect of obturation technique with immediate and delayed post space preparation on apical voids and bond strength of apical gutta-percha

2018 ◽  
Vol 47 (1) ◽  
pp. 470-480 ◽  
Author(s):  
Weilin Long ◽  
Jing Li ◽  
Yiwen Liu ◽  
Hongwei Jiang
Keyword(s):  
Bond Strength ◽  
Failure Modes ◽  
Continuous Wave ◽  
Volumetric Analysis ◽  
Micro Computed Tomography ◽  
Filling Materials ◽  
Gutta Percha ◽  
Percentage Volume ◽  
Post Space ◽  
Push Out

Objective The purpose of this study was to evaluate the effect of immediate and delayed post space preparation on the sealing ability of two root canal obturation techniques by using micro-computed tomography imaging and a push-out test. Methods The root canals of 40 human maxillary premolar teeth were instrumented and divided into four groups: (A) single cone (SC) followed by immediate post space preparation, (B) continuous wave of condensation (CWC) followed by immediate post space preparation, (C) SC followed by delayed post space preparation, and (D) CWC followed by delayed post space preparation. Micro-CT scans were performed for volumetric analysis of voids and filling materials in the apical 4-mm portion. A push-out test was performed, and failure modes (adhesive, cohesive, or mixed) were assessed. Data were analyzed using the Kruskal-Wallis test and one-way analysis of variance. Results No significant differences were observed among the four groups in terms of the percentage volume of voids of the apical 4 mm or the bond strength of apical gutta-percha. Conclusions The percentage volume of voids and bond strength of apical gutta-percha were similar and were not significantly influenced by the timing of post space preparation or the obturation technique.

scholarly journals Influence of the Resin Cement Thickness on the Push-Out Bond Strength of Glass Fiber Posts

2016 ◽  
Vol 27 (5) ◽  
pp. 592-598 ◽  
Author(s):  
Regina Maria Helen-Cot Marcos ◽  
◽  
Gustavo Ross Kinder ◽  
Edson Alfredo ◽  
Tarcisio Quaranta ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Composite ◽  
Resin Cement ◽  
Distilled Water ◽  
Cement Layer ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Post Space ◽  
Push Out

Abstract The objective of the present study was to evaluate the influence of resin cement thickness on the bond strength of prefabricated and customized glass fiber posts after storage in distilled water. Thirty human uniradicular roots were treated endodontically. The roots were divided into 3 groups: THIN (thin cement layer) - post space preparation with #0.5 drill and cementation of #0.5 post; THICK (thick cement layer) - post space preparation with #1 drill and cementation of #0.5 post; and CUSTOM (customized cement layer) - post space preparation with #1 drill and cementation of a customized post (#0.5 glass fiber posts customized with resin composite). All posts were luted with self-adhesive resin cement. The push-out test was carried out after storage for 24 h and 90 days in distilled water at 37 °C. The data were analyzed with three-way ANOVA and Tukey's test (a=0.05). Bond strengths were significantly higher for CUSTOM (9.37 MPa), than for THIN (7.85 MPa) and THICK (7.07 MPa), which were statistically similar. Considering the thirds, the bond strength varied in the sequence: apical (7.13 MPa) < middle (8.22 MPa) = coronal (8.94 MPa). Bond strength for 24 h storage was significantly higher (8.80 MPa) than for 90-day storage (7.40 MPa). It may be concluded that the thickness of resin cement influenced the bond strength of glass fiber posts. The customized posts presented higher bond strength. Storage in water for 90 days affected negatively the values of bond strength, especially for thick cement layers in the apical third.

scholarly journals Effect of Glass Fiber Post Adaptation on Push-Out Bond Strength to Root Dentin

2019 ◽  
Vol 30 (4) ◽  
pp. 350-355 ◽  
Author(s):  
Thiago Lopes de Freitas ◽  
Rafael Pino Vitti ◽  
Milton Edson Miranda ◽  
William Cunha Brandt
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Root Canal ◽  
Failure Modes ◽  
Resin Cement ◽  
Adhesive Failure ◽  
Fiber Post ◽  
Significant Difference ◽  
Glass Fiber Post ◽  
Push Out

Abstract The aim of this study was to evaluate the effect of different glass fiber posts (GFPs) diameters on the push-out bond strength to dentin. Forty unirradicular human teeth were endodontically treated and used for cementation of GFPs (White Post DC, FGM) with different diameters (n=10): P1 - ø 1.6 mm coronal x 0.85 mm apical; P2 - ø 1.8 mm coronal x 1.05 mm apical; P5 - ø 1.4 mm coronal x 0.65 mm apical; and PC - customized post number 0.5 with composite resin (Tetric Ceram A2, Ivoclair Vivadent). All GFPs were cemented into the root canal using a dual-curing luting composite (Variolink II, Ivoclar Vivadent). One slice (1.7 mm) of each root third of cemented GFP (cervical, middle, and apical) was submitted to push-out testing. Failure modes of all specimens were classified as: adhesive failure between resin cement and post; adhesive failure between dentin and resin cement; cohesive failure within resin cement, post or dentin; and mixed failure. The data were analyzed with two-way ANOVA and Tukey’s test (a=0.05). The highest bond strength values were presented for the P2 and PC groups. There was no statistically significant difference between the GFP thirds in each group. The groups P2, P5, and PC showed predominantly adhesive failure. For P1, the most prevalent type of failure was adhesive between resin cement and post. It may be concluded that a glass fiber post that is well adapted to the root canal presents higher bond strength values, regardless of GFP third.

scholarly journals Adhesion of real seal to human root dentin treated with different solutions

2012 ◽  
Vol 23 (5) ◽  
pp. 521-526 ◽  
Author(s):  
Renata Baldissera ◽  
Ricardo Abreu da Rosa ◽  
Márcia Helena Wagner ◽  
Milton Carlos Kuga ◽  
Fabiana Soares Grecca ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Failure Modes ◽  
Chlorhexidine Gluconate ◽  
The Other ◽  
Significant Difference ◽  
Root Dentin ◽  
Bond Strengths ◽  
Group 2 ◽  
Push Out

The aim of this study was to evaluate the effects of different irrigants on sealer-dentin bond strength when using Real Seal. Thirty single-rooted teeth were divided into 3 groups. In one group, the teeth were irrigated with 3 mL of 2.5% NaOCl after each file change, flushed with 17% EDTA for 3 min and finally rinsed with 3 mL of 2.5% NaOCl. In the other two groups, rinse with NaOCl was replaced with 2% chlorhexidine gluconate (CHX) and 0.9% saline, respectively. Each root was sectioned transversally into apical, middle and coronal thirds to obtain 2-mm-thick slices. Each slice was filled with Real Seal and Resilon. Push-out test was used to analyze bond strength and failure modes were classified as adhesive, cohesive or mixed, according to SEM observations. The push-out test did not reveal any statistically significant difference (p>0.05) between the irrigants. However, the groups exhibited significantly different (p<0.05) bond strengths in terms of the root canal third. Higher bond strength was observed at the apical third when compared with coronal third, while middle third presented intermediary values. Fifteen specimens were analyzed by SEM (5 per group). Eleven specimens exhibited adhesive failures (5 in saline, 4 in NaOCl and 2 in CHX group); 2 cohesive failures were observed in the CHX group, and 1 mixed failure each was observed in the CHX and NaOCl groups. The tested irrigants did not influence the bond strength of Resilon and Real Seal to dentin. The apical third exhibited higher mean bond strengths and adhesive failures were predominant.

scholarly journals Choice of Endodontic Fiber Posts and its Influence on Dental Malpractice: An in vitro Evaluation

2017 ◽  
Vol 18 (6) ◽  
pp. 452-457
Author(s):  
Houssam Jassar ◽  
Hassan El Husseini
Keyword(s):  
Bond Strength ◽  
Low Cost ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Fiber Posts ◽  
Significant Difference ◽  
Post Space ◽  
Adhesive Cement ◽  
Push Out

ABSTRACT Aims and objectives The fiber post type used in restoring endodontically treated teeth may affect the dental expert decision in the case of dental malpractice. The aim of this study was to evaluate the low-cost commercial fiber post in comparison with a higher cost or well-known documented fiber post system. Materials and methods A total of 20 premolars were selected for the study; following endodontic treatment, specimens were randomly divided into two groups of 10 specimens each according to the type of fiber post used: (1) Low-cost commercial fiber post (OYAPost, Taper Lucent, OYARICOM) and (2) higher cost well-known fiber post (Rely X Fiber post, 3M ESPE). Both fiber posts were cemented using self-adhesive cement (Rely X Unicem). Samples were subjected to push-out bond strength and to failure analysis. One-way analysis of variance was used (p < 0.005). Results There was no significant difference between the bond strength of the two tested groups (p > 0.05), while statistically significant difference (p < 0.05) was noted between the different post space regions (cervical, middle, and apical). Conclusion Based on the evidence from the study, it can be concluded that the type of fiber post should not affect the dental expert decision in the case of dental malpractice/lawsuit. Clinical significance All types of low-cost fiber posts may behave similarly to other higher cost or well-documented fiber posts. How to cite this article Ayoub F, Jassar H, El Husseini H, Salameh Z. Choice of Endodontic Fiber Posts and its Influence on Dental Malpractice: An in vitro Evaluation. J Contemp Dent Pract 2017;18(6):452-457.

scholarly journals Push-out bond strength of a new post system after various post space treatments

2016 ◽  
Vol 35 (6) ◽  
pp. 876-880 ◽  
Author(s):  
Melek AKMAN ◽  
Ayçe Unverdi ELDENIZ ◽  
Selen INCE ◽  
Mehmet Burak GUNESER
Keyword(s):  
Bond Strength ◽  
Post Space ◽  
Push Out

scholarly journals Comparison of Self-Etching Ceramic Primer and Conventional Silanization to Bond Strength in Cementation of Fiber Reinforced Composite Post

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1585
Author(s):  
Nan-Sim Pang ◽  
Bock-Young Jung ◽  
Byoung-Duck Roh ◽  
Yooseok Shin
Keyword(s):  
Bond Strength ◽  
Hydrofluoric Acid ◽  
Adhesive Bonding ◽  
Failure Modes ◽  
Testing Machine ◽  
Surface Treatments ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Push Out

Various mechanical and chemical surface treatments have been proposed to improve the retention of fiber-reinforced composite post (FRCP), but the results are still controversial. The bond strength and durability of a self-etching ceramic primer, which was recently released as an alternative to etching and silane, are not yet known. This study aimed to compare and evaluate the push-out bond strength of different surface treatments of FRCPs after an artificial aging procedure. Four groups (n = 10) were established to evaluated FRCP surface treatments (dentin adhesive bonding; silane and adhesive bonding; hydrofluoric acid, silane and adhesive bonding; and a self-etching ceramic primer). They were bonded with dual-curing rein cement (Multilink N) and stored in distilled water at 37 °C for 30 days, then thermal cycled for 7500 cycles. After being sectioned into 1 mm thickness, each coronal and apical part was evaluated for its the push-out bond strength by a universal testing machine. Each debonded specimen was observed by an optical microscope and divided according to the failure modes. The results showed that silane treatment significantly improved push-out bond strength, but the self-etching ceramic primer did not do so. Additional hydrofluoric acid treatment or the adhesive bonding agent alone did not significantly improve the retention of FRCPs. Cohesive failure of the luting material was found most frequently in all groups.

Sign in / Sign up

Export Citation Format

Share Document