Self-Adhesive Resin Cement for Luting Glass Fiber Posts

2014 ◽  
Vol 26 (6) ◽  
pp. 417-421 ◽  
Author(s):  
Noéli Boscato ◽  
Tatiana Pereira-Cenci ◽  
Rafael R. Moraes
Keyword(s):  
Glass Fiber ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement

scholarly journals Relining effects on the push-out shear bond strength of glass fiber posts

2016 ◽  
Vol 45 (4) ◽  
pp. 227-233
Author(s):  
Adriana Rosado Valente ANDRIOLI ◽  
Margareth COUTINHO ◽  
Andréa Araújo de VASCONCELLOS ◽  
Milton Edson MIRANDA
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Shear Bond Strength ◽  
Resin Cement ◽  
Cervical Region ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement ◽  
Push Out

Abstract Introduction The correct use of glass fiber posts in endodontically treated teeth is essential for the clinical success of restorative treatment. Objective This study evaluated the push-out shear bond strength of relined (R) or non-relined (NR) glass fiber posts, cemented with self-adhesive resin cement [RelyXTM U100 (U100)] and conventional resin cement [RelyXTM ARC (ARC)]. Material and method Sixty human single-rooted teeth were endodontically treated and divided into ARC-NR; U100-NR; ARC-R; U100-R groups. The teeth were sectioned into cervical, middle and apical thirds, and subjected to the push-out test. Bond strength was analyzed by the Friedman test; cement and post types were compared by the Mann Whitney test. The pattern of failures was evaluated with digital camera through images at 200x magnification, and was classified as adhesive (at the cement/dentin or cement/post interface), cohesive (cement or post), and mixed failures. Result In ARC-NR, bond strength values were higher in the cervical third; in U100-NR and ARC-R they were similar between the thirds. In U100-R, in the cervical and middle thirds the bond strength values were similar, and there was lower value in the apical third. For non-relined glass fiber posts, the highest mean bond strength values were observed with self-adhesive resin cement. Whereas, relined posts cemented with conventional resin cement had stronger cement layer in comparison with non-relined fiber posts. Conclusion The post relining technique was efficient in ARC-R. ARC-NR and U100-R showed improved bond strength in the cervical region of canal walls. The main failures were adhesive at the cement-post interface.

scholarly journals Glass fiber post treatment – does it influence resin cement bond strength?

2019 ◽  
Vol 48 ◽  
Author(s):  
Marciano de Freitas BORGES ◽  
Gabriela Simões TEIXEIRA ◽  
Anelise Fernandes MONTAGNER ◽  
Alexandre Henrique SUSIN
Keyword(s):  
Hydrogen Peroxide ◽  
Bond Strength ◽  
Sodium Bicarbonate ◽  
Glass Fiber ◽  
Surface Treatments ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement

Abstract Introduction Glass-fiber posts are used in order to improve the retention of restorations in endodontically treated teeth. Objective To evaluate the bond strength of glass-fiber posts submitted to different surface treatments and cemented to the root canal dentin with self-adhesive resin cement. Material and method Thirty roots of human canines were prepared and divided according to two factors: surface treatments (silane, 35% hydrogen peroxide, or sodium bicarbonate) and root thirds (cervical and middle thirds). The glass-fiber posts were cemented with self-adhesive resin cement (RelyX U200). After 24 h, the specimens were prepared for microtensile bond strength test (hourglass format), fracture pattern and micromorphological assessment by scanning electronic microscopy, in order to measure the cement line. Result The data (MPa and µm) were submitted to two-way ANOVA and Tukey’s test (α = 5%). The surface treatments influenced the bond strength of the posts cemented with self-adhesive resin cement (p<0.00). The mean bond strength (standard deviations) differed according to the region of root dentin (p<0.00): the cervical region (Control: 19.16MPa (3.71); Silane: 25.65MPa (4.04); Hydrogen peroxide: 24.43MPa (3.16); Sodium bicarbonate: 37.42MPa (8.27)) showed higher bond strength values than the middle third of the root (Control: 14.66MPa (4.65); Silane: 12.52MPa (5.03); Hydrogen peroxide: 10.64MPa (3.33); Sodium bicarbonate: 10.87MPa (2.49)). Conclusion Treatment of the glass-fiber post surface with chemical and physical agents increased the bond strength of the cement-post-dentin interface in the cervical third and the treatment with Sodium bicarbonate showed better results in bond strength.

scholarly journals Fracture resistance of metal-ceramic crown copings cemented to two types of intra-radicular posts

2018 ◽  
Vol 47 (5) ◽  
pp. 305-308
Author(s):  
Priscila Alonso HENRIQUES ◽  
André Hayato SAGUCHI ◽  
Fábio Valverde Rodrigues BASTOS NETO ◽  
Igor PROKOPOWITSCH ◽  
Angela Toshie ARAKI
Keyword(s):  
Glass Fiber ◽  
Tensile Load ◽  
Resin Cement ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Metal Ceramic ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement ◽  
Group 2 ◽  
Ceramic Crown

Abstract Introduction Endodontically treated teeth are more susceptible to root fracture than vital teeth. In order to reduce the risk of fracture, the use of intra-radicular posts and crowns is indicated. However, their own fracture resistance remains unclear. Objective To analyze the behavior of metal-ceramic crown copings cemented to two types of intra-radicular posts under tensile stress. Material and method Sixteen metal-ceramic crown copings cemented with zinc phosphate cement to cast metal posts and cores (group 1, n = 8) or with self-adhesive resin cement to glass-fiber posts rebased with composite resin (group 2, n = 8) were subjected to tensile testing after endodontic treatment and standardized preparation. Failure occurred when the crown coping and/or post-core assembly fractured and/or detached. Result In group 1, after the application of a mean tensile load of 46.83 N, 7 crown copings and metal cores separated as a whole, while in 1 specimen the coping detached from the metal core. In group 2, a mean tensile load of 127.68 N resulted in glass-fiber post fracture, and in 1 case the entire crown-post-core assembly was detached. Tensile strength differed significantly between the two groups (p = 0.0085). Conclusion Our findings suggest that metal-ceramic crown copings cemented with self-adhesive resin cement show strong adhesion to composite resin cores associated with glass-fiber posts, thus providing a safe alternative to the use of cast metal posts and cores.

scholarly journals Effect of Anatomical Customization of the Fiber Post on the Bond Strength of a Self-Adhesive Resin Cement

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Adricyla Teixeira Rocha ◽  
Leticia Machado Gonçalves ◽  
Ana Júlia de Carvalho Vasconcelos ◽  
Etevaldo Matos Maia Filho ◽  
Ceci Nunes Carvalho ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Cement ◽  
Control Group ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement ◽  
Push Out

Aim. The aim of the study was to evaluate, by means of the push-out test, the effect of the anatomical customization of the fiber post on the bond strength of a self-adhesive resin cement. Methods. Twelve endodontically treated, human, upper central incisors were randomly divided into two groups (n=6): control (glass fiber posts cemented with Relyx® U200) and customized (glass fiber posts anatomically customized with translucent composite resin cemented with Relyx U200). The roots were sectioned into three slices, cervical, middle, and apical, and photographed with a digital camera attached to a stereomicroscopic loupe. The images were analyzed by software, for evaluation of the cement line. The slices were subsequently submitted to the push-out test until the post had completely extruded, and the fracture mode was analyzed with a stereomicroscopic loupe. Results. The results showed significant differences between the groups in the different root thirds in relation to the area occupied by air bubbles (p<0.05). Bond strength, when all the thirds are considered, was 8.77 ± 4.89 MPa for the control group and 16.96 ± 4.85 MPa for the customized group. Conclusion. The customized group showed greater bond resistance than the control group and a more uniform cement layer.

scholarly journals Influence of the Resin Cement Thickness on the Push-Out Bond Strength of Glass Fiber Posts

2016 ◽  
Vol 27 (5) ◽  
pp. 592-598 ◽  
Author(s):  
Regina Maria Helen-Cot Marcos ◽  
◽  
Gustavo Ross Kinder ◽  
Edson Alfredo ◽  
Tarcisio Quaranta ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Composite ◽  
Resin Cement ◽  
Distilled Water ◽  
Cement Layer ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Post Space ◽  
Push Out

Abstract The objective of the present study was to evaluate the influence of resin cement thickness on the bond strength of prefabricated and customized glass fiber posts after storage in distilled water. Thirty human uniradicular roots were treated endodontically. The roots were divided into 3 groups: THIN (thin cement layer) - post space preparation with #0.5 drill and cementation of #0.5 post; THICK (thick cement layer) - post space preparation with #1 drill and cementation of #0.5 post; and CUSTOM (customized cement layer) - post space preparation with #1 drill and cementation of a customized post (#0.5 glass fiber posts customized with resin composite). All posts were luted with self-adhesive resin cement. The push-out test was carried out after storage for 24 h and 90 days in distilled water at 37 °C. The data were analyzed with three-way ANOVA and Tukey's test (a=0.05). Bond strengths were significantly higher for CUSTOM (9.37 MPa), than for THIN (7.85 MPa) and THICK (7.07 MPa), which were statistically similar. Considering the thirds, the bond strength varied in the sequence: apical (7.13 MPa) < middle (8.22 MPa) = coronal (8.94 MPa). Bond strength for 24 h storage was significantly higher (8.80 MPa) than for 90-day storage (7.40 MPa). It may be concluded that the thickness of resin cement influenced the bond strength of glass fiber posts. The customized posts presented higher bond strength. Storage in water for 90 days affected negatively the values of bond strength, especially for thick cement layers in the apical third.

scholarly journals Stress Generated by Customized Glass Fiber Posts and Other Types by Photoelastic Analysis

2015 ◽  
Vol 26 (3) ◽  
pp. 222-227 ◽  
Author(s):  
Kátia Bosso ◽  
Alcides Gonini Júnior ◽  
Ricardo Danil Guiraldo ◽  
Sandrine Bittencourt Berger ◽  
Murilo Baena Lopes
Keyword(s):  
Glass Fiber ◽  
High Stress ◽  
Resin Cement ◽  
Fiber Post ◽  
Tooth Structure ◽  
Biomechanical Behavior ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Post And Core

Endodontic posts are necessary to provide adequate retention and support when no sufficient remaining structure is available to retain the core. There are different materials and techniques to construct post-and-core, but there is no consensus about which one promotes better stress distribution on the remaining tooth structure. This study aimed to quantify and evaluate the distribution of stress in the root produced by customized glass fiber posts compared to different endodontic posts. Twenty-five simulated roots from photoelastic resin were made and divided into 5 groups: CPC, cast post-and-core; SP, screw post; CF, carbon fiber post; GF, glass fiber post; and CGF, customized glass fiber post. After cementing CPC and SP posts with zinc phosphate cement, and CF, GF and CGF posts with resin cement, resin cores were made for groups 2-5. Specimens were evaluated with vertical or 45° oblique loading. To analyze the fringes, the root was divided into 6 parts: palatal cervical, palatal middle, palatal apical, vestibular cervical, vestibular middle, and vestibular apical. The formed fringes were photographed and quantified. Data were recorded and subjected to two-way ANOVA and Tukey's test (5%). SP (1.95±0.60) showed higher stress (p<0.05) compared to the others (CPC-0.52±0.74; CF-0.50±0.75, GF-0.23±0.48 and CGF-0.45±0.83). All posts showed high stress in apical third (CPC-1.40±0.65; SP-2.30±0.44, CF-1.80±0.45, GF-1.20±0.45, CGF-1.70±1.03) Low stress was found in cervical third (CPC-0.20±0.45; CF-0.00±0.00, GF-0.00±0.00, CGF-0.00±0.00), except by SP (1.90±0.65), which showed statistical difference (p<0.05). Customized post showed high stress concentration at the root and conventional glass fiber posts showed more favorable biomechanical behavior.

scholarly journals Does the Moment of Fiber Post Cutting Influence on the Retention to Root Dentin?

2015 ◽  
Vol 26 (2) ◽  
pp. 141-145 ◽  
Author(s):  
Marcela G. Borges ◽  
André L. Faria-e-Silva ◽  
Paulo C. F. Santos-Filho ◽  
Fernanda P. Silva ◽  
Luís R. M. Martins ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Testing Machine ◽  
Resin Cement ◽  
Fiber Post ◽  
Root Canals ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
The Moment ◽  
Post Hoc

Despite several advantages associated with pre-fabricated glass-fiber posts, the coronal portion of these posts must be cut to allow their use in various clinical situations. However, cutting the cemented post can generate stress on the bonding interface and affect the bond strength. The aim of this study was to investigate the effect the of fiber post cutting on the bond strength of root canals. Sixty bovine incisor roots were included in resin cylinders with simulated periodontal ligaments. Glass-fiber posts were luted using regular resin cement RelyX ARC (3M ESPE) or self-adhesive cement RelyX Unicem (3M ESPE). The posts were cut prior to cementation, immediately after luting or after building up the core (n=10). After storage for 24 h, the samples were cut and subject to push-out testing using a mechanical testing machine (EMIC DL 2000). Data were analyzed using two-way ANOVA (resin cement x moment of post cutting) and Tukey's post hoc test (α=0.05). The moment of fiber post cutting did not affect the bond strength when Unicem was used. However, the bond strength was reduced when ARC was used and when the post was cut immediately. In conclusion, the moment of fiber post cutting may affect the retention of root canal posts when a regular resin cement is used.

The Role of Resin Cement on Bond Strength of Glass-fiber Posts Luted Into Root Canals: A Systematic Review and Meta-analysis of In Vitro Studies

2014 ◽  
Vol 39 (1) ◽  
pp. E31-E44 ◽  
Author(s):  
R Sarkis-Onofre ◽  
JA Skupien ◽  
MS Cenci ◽  
RR Moraes ◽  
T Pereira-Cenci
Keyword(s):  
Systematic Review ◽  
Bond Strength ◽  
Meta Analysis ◽  
Resin Cement ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Root Canals ◽  
Fiber Posts ◽  
Glass Fiber Posts

SUMMARY Because there are several ways to cement glass-fiber posts (GFPs) into root canals, there is no consensus on the best strategy to achieve high bond strengths. A systematic review was conducted to determine if there is difference in bond strength to dentin between regular and self-adhesive resin cements and to verify the influence of several variables on the retention of GFPs. This report followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. In vitro studies that investigated the bond strength of GFPs luted with self-adhesive and regular resin cements were selected. Searches were carried out in the PubMed and Scopus databases. No publication year or language limit was used, and the last search was done in October 2012. A global comparison was performed between self-adhesive and regular resin cements. Two subgroup analyses were performed: 1) Self-adhesive × Regular resin cement + Etch-and-rinse adhesive and 2) Self-adhesive × Regular resin cement + Self-etch adhesive. The analyses were carried out using fixed-effect and random-effects models. The results showed heterogeneity in all comparisons, and higher bond strength to dentin was identified for self-adhesive cements. Although the articles included in this meta-analysis showed high heterogeneity and high risk of bias, the in vitro literature seems to suggest that use of self-adhesive resin cement could improve the retention of GFPs into root canals.

scholarly journals Push-out Bond Strength of Glass Fiber Posts Cemented in Weakened Roots with Different Luting Agents

2016 ◽  
Vol 17 (2) ◽  
pp. 119-124 ◽  
Author(s):  
Lourenço Correr-Sobrinho ◽  
Daniele M da Silveira-Pedrosa ◽  
Luis RM Martins ◽  
Mário AC Sinhoreti ◽  
Manoel D Sousa-Neto ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Failure Modes ◽  
Resin Cement ◽  
Root Canals ◽  
Luting Agents ◽  
Fiber Posts ◽  
Luting Agent ◽  
Glass Fiber Posts ◽  
Push Out

ABSTRACT Aim To evaluate the push-out bond strength (BS) of direct anatomic posts (DAPs) and conventional fiber posts (CFPs) cemented with different luting agents in different thirds of flared root canals. Materials and methods A total of 60 human single-rooted canine teeth were transversally sectioned 16 mm from the radicular apex. After endodontic treatment, canals were flared with diamond burs. Samples were divided into six groups according to post type and luting agent: DAP and RelyX U100 (RXU); DAP and RelyX ARC (RXA); DAP and RelyX Luting 2 (RXL); CFP and RXU; CFP and RXA; CFP and RXL. Roots were sectioned transversely into six 1-mm-thick slices. The push-out test was performed and failure modes were observed. Results The DAP groups (7.23 ± 2.05) showed highest BS values (p < 0.05) when compared with CFP (5.93 ± 1.76). RelyX U100 (8.17 ± 1.70) showed higher BS values (p < 0.05) than RXA (6.46 ± 1.38), and RXL (5.10 ± 1.65) showed the lowest values. Bond strength on the apical third was statistically lower (p < 0.05) than that on the other thirds of the root canals. There was a predominance of adhesive failure for all groups. Conclusion The DAPs improved retention in flared root canals, and RXU was the most effective luting agent. The apical third showed the lowest BS values. Clinical significance The relining procedure of fiber posts with composite and the proper selection of luting resin cement are important for increasing bonding effectiveness in flared root canals. How to cite this article da Silveira-Pedrosa DM, Martins LRM, Sinhoreti MAC, Correr-Sobrinho L, Sousa-Neto MD, Costa ED Jr, de F Pedrosa-Filho C, de Carvalho JR Jr. Push-out Bond Strength of Glass Fiber Posts Cemented in Weakened Roots with Different Luting Agents. J Contemp Dent Pract 2016;17(2): 119-124.

Sign in / Sign up

Export Citation Format

Share Document