How sleep problems contribute to simulator sickness: Preliminary results from a realistic driving scenario

From a biological point of view, alcohol human attentional impairment occurs before reaching a Blood Alcohol Content (BAC index) of 0.08% (0.05% under the Italian legislation), thus generating a significant impact on driving safety if the drinker subject is driving a car. Car drivers must keep a safe driving dynamic, having an unaltered physiological status while processing the surrounding information coming from the driving scenario (e.g., traffic signs, other vehicles and pedestrians). Specifically, the identification and tracking of pedestrians in the driving scene is a widely investigated problem in the scientific community. The authors propose a full, deep pipeline for the identification, monitoring and tracking of the salient pedestrians, combined with an intelligent electronic alcohol sensing system to properly assess the physiological status of the driver. More in detail, the authors propose an intelligent sensing system that makes a common air quality sensor selective to alcohol. A downstream Deep 1D Temporal Residual Convolutional Neural Network architecture will be able to learn specific embedded alcohol-dynamic features in the collected sensing data coming from the GHT25S air-quality sensor of STMicroelectronics. A parallel deep attention-augmented architecture identifies and tracks the salient pedestrians in the driving scenario. A risk assessment system evaluates the sobriety of the driver in case of the presence of salient pedestrians in the driving scene. The collected preliminary results confirmed the effectiveness of the proposed approach.

Download Full-text

Challenges and Requirements of Immersive Media in Autonomous Car: Exploring the Feasibility of Virtual Entertainment Applications

i-com ◽

10.1515/icom-2018-0030 ◽

2019 ◽

Vol 18 (2) ◽

pp. 105-125

Author(s):

Carolin Wienrich ◽

Kristina Schindler

Keyword(s):

User Experience ◽

Autonomous Vehicles ◽

Driving Simulator ◽

Autonomous Driving ◽

Simulator Sickness ◽

Significant Difference ◽

Driving Scenario ◽

Immersive Media

Abstract This paper investigated the influence of VR-entertainment systems on passenger and entertainment experience in vehicles with smooth movements. To simulate an autonomous driving scenario, a tablet and a mobile VR-HMD were evaluated in a dynamic driving simulator. Passenger, user and entertainment experience were measured through questionnaires based on comfort/discomfort, application perception, presence, and simulator sickness. In two experiments, two film sequences with varying formats (2D versus 3D) were presented. In Experiment 1, the established entertainment system (tablet + 2D) was tested against a possible future one (HMD + 3D). The results indicated a significantly more favorable experience for the VR-HMD application in the dimensions of user experience (UX) and presence, as well as low simulator sickness values. In Experiment 2, the film format was held constant (2D), and only the device (tablet versus HMD) was varied. There was a significant difference in all constructs, which points to a positive reception of the HMD. Additional analyses of the HMD device data for both experiments showed that the device and not the film format contributed to the favorable experience with the HMD. Additionally, the framework to evaluate the new application context of VR as an entertainment system in autonomous vehicles was discussed.

Download Full-text

The O–C diagrams of minor planets − a new approach to modelling the rotation

International Astronomical Union Colloquium ◽

10.1017/s0252921100031407 ◽

1999 ◽

Vol 173 ◽

pp. 185-188

Author(s):

Gy. Szabó ◽

K. Sárneczky ◽

L.L. Kiss

Keyword(s):

Error Analysis ◽

Time Dependence ◽

Theoretical Work ◽

Minor Planet ◽

Minor Planets ◽

New Approach ◽

Preliminary Results ◽

Ccd Observations

AbstractA widely used tool in studying quasi-monoperiodic processes is the O–C diagram. This paper deals with the application of this diagram in minor planet studies. The main difference between our approach and the classical O–C diagram is that we transform the epoch (=time) dependence into the geocentric longitude domain. We outline a rotation modelling using this modified O–C and illustrate the abilities with detailed error analysis. The primary assumption, that the monotonity and the shape of this diagram is (almost) independent of the geometry of the asteroids is discussed and tested. The monotonity enables an unambiguous distinction between the prograde and retrograde rotation, thus the four-fold (or in some cases the two-fold) ambiguities can be avoided. This turned out to be the main advantage of the O–C examination. As an extension to the theoretical work, we present some preliminary results on 1727 Mette based on new CCD observations.

Download Full-text

Cyclic Evolution of Sunspots: Gleaning New Results from Old Data

International Astronomical Union Colloquium ◽

10.1017/s0252921100064411 ◽

2000 ◽

Vol 179 ◽

pp. 163-165

Author(s):

S. K. Solanki ◽

M. Fligge ◽

P. Pulkkinen ◽

P. Hoyng

Keyword(s):

Sunspot Number ◽

Sunspot Cycle ◽

Preliminary Results ◽

Butterfly Diagram

AbstractThe records of sunspot number, sunspot areas and sunspot locations gathered over the centuries by various observatories are reanalysed with the aim of finding as yet undiscovered connections between the different parameters of the sunspot cycle and the butterfly diagram. Preliminary results of such interrelationships are presented.

Download Full-text

Systematic effects in observed parallaxes

International Astronomical Union Colloquium ◽

10.1017/s0252921100073887 ◽

1978 ◽

Vol 48 ◽

pp. 31-35

Author(s):

R. B. Hanson

Keyword(s):

Error Estimates ◽

Zero Point ◽

Absolute Zero ◽

Apparent Magnitude ◽

Coherent System ◽

Preliminary Results ◽

General Catalogue ◽

Systematic Effects ◽

New Evidence ◽

Right Ascension

Several outstanding problems affecting the existing parallaxes should be resolved to form a coherent system for the new General Catalogue proposed by van Altena, as well as to improve luminosity calibrations and other parallax applications. Lutz has reviewed several of these problems, such as: (A) systematic differences between observatories, (B) external error estimates, (C) the absolute zero point, and (D) systematic observational effects (in right ascension, declination, apparent magnitude, etc.). Here we explore the use of cluster and spectroscopic parallaxes, and the distributions of observed parallaxes, to bring new evidence to bear on these classic problems. Several preliminary results have been obtained.

Download Full-text

Quantitative Measurements on the Ion Etching of TMV

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100072125 ◽

1973 ◽

Vol 31 ◽

pp. 336-337

Author(s):

Irwin Bendet ◽

Nabil Rizk

Keyword(s):

Electron Microscope ◽

Tobacco Mosaic Virus ◽

Mosaic Virus ◽

Ion Current ◽

Beam Diameter ◽

Ion Etching ◽

Preliminary Results ◽

Quantitative Measurements ◽

Monitoring Devices

Preliminary results reported last year on the ion etching of tobacco mosaic virus indicated that the diameter of the virus decreased more rapidly at 10KV than at 5KV, perhaps reaching a constant value before disappearing completely.In order to follow the effects of ion etching on TMV more quantitatively we have designed and built a second apparatus (Fig. 1), which incorporates monitoring devices for measuring ion current and vacuum as well as accelerating voltage. In addition, the beam diameter has been increased to approximately 1 cm., so that ten electron microscope grids can be exposed to the beam simultaneously.

Download Full-text

Granular bainite or granular ferrite? A preliminary TEM investigation of an HSLA-100 steel

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100087239 ◽

1991 ◽

Vol 49 ◽

pp. 584-585

Author(s):

R. Varughese ◽

S. W. Thompson ◽

P. R. Howell

Keyword(s):

Room Temperature ◽

Transformation Products ◽

Accurate Description ◽

Granular Bainite ◽

Preliminary Results ◽

The Past ◽

Light Micrograph ◽

Multiphase Reaction ◽

Detailed Nature

Ever since Habraken and Economopoulos first employed the term granular bainite to classify certain unconventional transformation products in continuously cooled steels, the term has been widely accepted and used, despite the lack of a clear consensus as to the detailed nature of the transformation products which constitute granular bainite. This paper presents the preliminary results of a TEM investigation of an 0.04 wt% C, copper-containing steel (designated HSLA-100). It is suggested that the term granular ferrite rather than granular bainite is a more accurate description of this multiphase reaction product.Figure 1 is a light micrograph of a sample which had been air-cooled from 900°C to room temperature. The microstructure is typical of that which has been termed granular bainite in the past and appears to consist of equiaxed ferritic grains together with other minor transformation products. In order to examine these structures in more detail, both continuously cooled and isothermally transformed and quenched materials have been examined with TEM. Granular bainite has been found in virtually all samples.

Download Full-text