scholarly journals FURTHER OBSERVATIONS ON THE KINETICS OF HAEMOLYSIS, BY BRILLIANT GREEN AND SERUM

1933 ◽  
Vol 23 (1) ◽  
pp. 311-317
Author(s):  
Eric Ponder
Keyword(s):  
1935 ◽  
Vol 117 (804) ◽  
pp. 272-288 ◽  

It is well known that the serum and plasma proteins usually produce inhibition of hæmolysis by saponin, the bile salts, the soaps, and other related lysins. As early as 1908, however, Sachs described an acceleration of hæmolysis as occurring when serum or plasma is added to systems containing sodium oleate, after the oleate had been in contact with the cells for some time. The same effect was later observed, under certain conditions, by Ponder for sodium glycocholate (1922), for sodium taurocholate (1923), and for stearates and oleates (1924), and also by Sen and Mitra (1928) in systems containing taurocholate, although Sen and Sen (1928) had previously failed to obtain it. It is known from these investigations that the concentration of taurocholate, etc., used, the quantity of serum or plasma added, and the time for which the lysin is allowed to react with the cells determine whether, and how great, an acceleration replaces the more usual inhibition, but otherwise the kinetics of hæmolysis in these systems is obscure. They are of interest, however, because of their resemblance to colloidal silicic acid-complement and brilliant green-serum systems, in which the cells react with the lysin only after being acted on by a sensitizing agent, and in which, as in these systems, the order of addition of the various components largely determines the final result (see Ponder, 1928, 1932, a , 1933). It has been already suggested, indeed, that the taurocholate acts by sensitizing the cells to the lytic action of the subsequently added serum, as well as by producing lysis itself, just as brilliant green brings about a similar sensitization, and is, in sufficient concentration, a lysin per se (Ponder, 1934, a ). The only other suggestion which has been put forward is that of Sen and Roy (1930-31), who observe that either an inhibition or an acceleration can be obtained by adding various amines to systems containing sodium taurocholate, the result depending on whether the addition is made before or after the taurocholate has come into contact with the cells. Since the addition of the amines makes the systems containing cells and taurocholate more alkaline (the p H of such systems usually being between 5·0 and 6·0), Sen and Roy suggest that the similar accelerating effect of serum may be due, in part at least, to its alkali content.


2022 ◽  
Author(s):  
Qana A. Alsulami ◽  
A. Rajeh ◽  
Mohammed A. Mannaa ◽  
Soha M. Albukhari ◽  
Doaa F. Baamer

Abstract The study used a one-step hydrothermal method to prepare Fe3O4-FeVO4 and xRGO/Fe3O4-FeVO4 nanocomposites. XRD, TEM, EDS, XPS, DRS, and PL techniques were used to examine the structurally and morphologically properties of the prepared samples. The XRD results appeared that the Fe3O4-FeVO4 has a triclinic crystal structure. Under hydrothermal treatment, (GO) was effectively reduced to (RGO) as illustrated by XRD and XPS results. UV-Vis analysis revealed that the addition of RGO enhanced the absorption in the visible region and narrowed the band gap energy. The photoactivities of the prepared samples were evaluated by degrading methylene blue (MB), phenol and brilliant green (BG) under sunlight illumination. As indicated by all the nanocomposites, photocatalytic activity was higher than the pure Fe3O4-FeVO4 photocatalyst, and the highest photodegradation efficiency of MB and phenol was shown by the 10%RGO/Fe3O4-FeVO4. In addition, the study examined the mineralization (TOC), photodegradation process, and photocatalytic reaction kinetics of MB and phenol.


2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
R. A. Mansour ◽  
Abeer El Shahawy ◽  
A. Attia ◽  
Mokhtar S. Beheary

The removal of brilliant green (BG) dye from an aqueous solution using activated carbon (AC) derived from guava tree wood is conducted in batch conditions. The influence of different factors such as contact time, pH, adsorbent dosage, initial dye concentration, and temperature on the adsorption of BG onto AC was investigated. FTIR, BET, and SEM analyses were performed to determine the characteristics of the material. The isotherm results were analyzed using the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms. Linear regression was used to fit the experimental data. It was found that the equilibrium data are best represented by the Freundlich isotherm, and the adsorption capacity (qe) was 90 mg dye/g AC. The values of the free energy (∆G), enthalpy (∆H), and entropy (∆S) were −86.188 kJ/mol, 43.025 kJ/mol, and 128 J/mol.K, respectively, at pH 7 for the BG dye. The kinetics of BG dye adsorption were analyzed using pseudo-first-order and pseudo-second-order models, and it was found that the pseudo-second-order model was suitable for the behavior of the BG dye at R2 = 0.999.


Sign in / Sign up

Export Citation Format

Share Document