Anisotropic Damage Effect Tensors for the Symmetrization of the Effective Stress Tensor

1997 ◽  
Vol 64 (1) ◽  
pp. 106-110 ◽  
Author(s):  
G. Z. Voyiadjis ◽  
T. Park
Keyword(s):  
Stress Tensor ◽  
Effective Stress ◽  
Fourth Order ◽  
Damage Mechanics ◽  
Continuum Theory ◽  
Continuum Damage Mechanics ◽  
Damage Effect ◽  
Anisotropic Damage ◽  
Tensor Algebra ◽  
Physical Description

Based on the concept of the effective stress and on the description of anisotropic damage deformation within the framework of continuum damage mechanics, a fourth order damage effective tensor is properly defined. For a general state of deformation and damage, it is seen that the effective stress tensor is usually asymmetric. Its symmetrization is necessary for a continuum theory to be valid in the classical sense. In order to transform the current stress tensor to a symmetric effective stress tensor, a fourth order damage effect tensor should be defined such that it follows the rules of tensor algebra and maintains a physical description of damage. Moreover, an explicit expression of the damage effect tensor is of particular importance in order to obtain the constitutive relation in the damaged material. The damage effect tensor in this work is explicitly characterized in terms of a kinematic measure of damage through a second-order damage tensor. In this work, tensorial forms are used for the derivation of such a linear transformation tensor which is then converted to a matrix form.

scholarly journals On continuum damage mechanics

2019 ◽  
Vol 52 (3) ◽  
pp. 125-147
Author(s):  
Kari Juhani Santaoja
Keyword(s):  
Stress Tensor ◽  
Effective Stress ◽  
Elastic Strain ◽  
Damage Mechanics ◽  
Volume Fraction ◽  
Strain Tensor ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
The Matrix ◽  
Elastic Strain Tensor

A material containing spherical microvoids with a Hookean matrix response was shown to take the appearance usually applied in continuum damage mechanics. However, the commonly used variable damage D was replaced with the void volume fraction f , which has a clear physical meaning, and the elastic strain tensor \Bold {ε}^e with the damage-elastic strain tensor \Bold {ε}^{de}. The postulate of strain equivalence with the effective stress concept was reformulated and applied to a case where the response of the matrix obeys Hooke’s law. In contrast to many other studies, in the derived relation between the effective stress tensor \Bold {\Tilde{σ}} and the stress tensor \Bold {σ}, the tensor \Bold {\Tilde{σ}} is symmetric. A uniaxial bar model was introduce for clarifying the derived results. Other candidates for damage were demonstrated by studying the effect of carbide coarsening on creep rate.

Bridging the macro to mesoscale: Evaluating the fourth-order anisotropic damage tensor parameters from ultrasonic measurements of an isotropic solid under triaxial stress loading

2018 ◽  
Vol 28 (2) ◽  
pp. 219-232 ◽  
Author(s):  
Louise Olsen-Kettle
Keyword(s):  
Fourth Order ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Uniaxial Stress ◽  
Anisotropic Damage ◽  
Internal Damage ◽  
Isotropic Solid ◽  
Selection Of Variables ◽  
Transverse Isotropic ◽  
Selection Of

One of the most challenging problems which arises in continuum damage mechanics is the selection of variables to describe the internal damage. Many theories have been proposed and various types of damage variables ranging from scalar to vector to tensor quantities have been used. In this paper we consider anisotropic damage and the most general form for damage by using a fourth-order tensor for the damage variables. We demonstrate how experimentally measured quantities can be related to the internal tensorial damage variables. We apply this analysis to experiments of an initially isotropic solid becoming transverse isotropic under triaxial or uniaxial stress loading.

Kinematic Description of Damage

1998 ◽  
Vol 65 (1) ◽  
pp. 93-98 ◽  
Author(s):  
Taehyo Park ◽  
G. Z. Voyiadjis
Keyword(s):  
Fourth Order ◽  
Damage Mechanics ◽  
Effective Strain ◽  
Continuum Damage Mechanics ◽  
Second Order ◽  
Finite Strains ◽  
Damage Effect ◽  
Energy Equivalence ◽  
Simple Mapping ◽  
Damage Tensor

In this paper the kinematics of damage for finite elastic deformations is introduced using the fourth-order damage effect tensor through the concept of the effective stress within the framework of continuum damage mechanics. However, the absence of the kinematic description of damage deformation leads one to adopt one of the following two different hypotheses. One uses either the hypothesis of strain equivalence or the hypothesis of energy equivalence in order to characterize the damage of the material. The proposed approach in this work provides a relation between the effective strain and the damage elastic strain that is also applicable to finite strains. This is accomplished in this work by directly considering the kinematics of the deformation field and furthermore it is not confined to small strains as in the case of the strain equivalence or the strain energy equivalence approaches. The proposed approach shows that it is equivalent to the hypothesis of energy equivalence for finite strains. In this work, the damage is described kinematically in the elastic domain using the fourth-order damage effect tensor which is a function of the second-order damage tensor. The damage effect tensor is explicitly characterized in terms of a kinematic measure of damage through a second-order damage tensor. The constitutive equations of the elastic-damage behavior are derived through the kinematics of damage using the simple mapping instead of the other two hypotheses.

An Elastoplastic-anisotropic Damage Model for Concrete

2011 ◽  
Vol 261-263 ◽  
pp. 371-375
Author(s):  
Jun Liu ◽  
Gao Lin
Keyword(s):  
Effective Stress ◽  
Damage Mechanics ◽  
Damage Model ◽  
Nonlinear Behavior ◽  
Continuum Damage Mechanics ◽  
Anisotropic Damage ◽  
Softening Effect ◽  
Damage Constitutive Model ◽  
Structural Levels ◽  
Damage Tensor

An elastoplastic-anisotropic damage constitutive model for the description of nonlinear behavior of concrete is presented. The yield surface is developed in effective stress spaces, which takes into account the hardening effect and better match the experimental data. The stiffness degradation and softening effect are considered in the framework of continuum damage mechanics formulation. The second-order damage tensor is used to characterize the anisotropy induced by the orientation of microcracks. In order to simulate the unilateral effect, the elastic Helmholtz free energy is decomposed into a volumetric part and a deviatoric part. The different behavior under tensile and compressive loadings is modeled by using different variables in effective stress and damage tensor. Numerical results of the model accord well with experimental results at the material and structural levels.

New Tensors for Anisotropic Damage in Continuum Damage Mechanics

2012 ◽  
Vol 134 (2) ◽  
Author(s):  
George Z. Voyiadjis ◽  
Mohammed A. Yousef ◽  
Peter I. Kattan
Keyword(s):  
Mechanical Behavior ◽  
Elastic Energy ◽  
Elastic Strain ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Damage Effect ◽  
Anisotropic Damage ◽  
Continuum Damage ◽  
Energy Equivalence ◽  
Scalar Invariant

In this work, new proposed damage tensors are studied in order to investigate the damage effect variables in the mechanical behavior of materials. All cases studied in this work are defined in terms of the elasticity of the material and based on the hypotheses of both elastic strain equivalence and elastic energy equivalence. Moreover, the new proposed damage tensors are anisotropically expressed in terms of the well-known damage effect tensor M. The principal-valued damage effect tensor is used to obtain the first scalar invariant of that tensor and its inverse, which are employed in expressing and verifying the new proposed damage tensors. The study demonstrates that most of the new proposed damage tensors are verified within the framework of continuum damage mechanics. In addition, new hybrid damage tensors are proposed which are defined in terms of the damage effect tensor and the new proposed damage tensors. The new hybrid damage tensors are eventually expressed in terms of the damage effect tensor.

Shakedown-Ratcheting Analysis of a Spherical Pressure Vessel by Anisotropic Continuum Damage Mechanics

2018 ◽  
Author(s):  
Ali Nayebi ◽  
Azam Surmiri ◽  
Hojjatollah Rokhgireh
Keyword(s):  
Pressure Vessel ◽  
Damage Mechanics ◽  
Kinematic Hardening ◽  
Continuum Damage Mechanics ◽  
Mapping Method ◽  
Anisotropic Damage ◽  
Continuum Damage ◽  
Interaction Diagram ◽  
Plastic Shakedown ◽  
Spherical Pressure

In cyclic loading and when plastic flow occurs, discontinuities grow. In this research, interaction diagram of Bree has been developed when the spherical pressure vessel contains discontinuities such as voids and microcracks. Bree’s diagram is used for ratcheting assessment of pressurized equipment in ASME III NH. Nature of these defects leads to an anisotropic damage. Anisotropic Continuum Damage Mechanics (CDM) is considered to account effects of these discontinuities on the behavior of the structure. Shakedown – ratcheting response of a hollow sphere under constant internal pressure and cyclic thermal loadings are studied by using anisotropic CDM theory coupled with nonlinear kinematic hardening of Armstrong-Frederick m’s model (A-F). Return mapping method is used to solve numerically the developed relations. Elastic, elastic shakedown, plastic shakedown and ratcheting regions are illustrated in the modified Bree’s diagram. Influence of anisotropic damage due to the plastic deformation is studied and it was shown that the plastic shakedown region is diminished because of the developed damage.

An Anisotropic Creep Damage Model for Anisotropic Weld Metal

2007 ◽  
Author(s):  
S. Peravali ◽  
T. H. Hyde ◽  
K. A. Cliffe ◽  
S. B. Leen
Keyword(s):  
Weld Metal ◽  
Test Data ◽  
Damage Evolution ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Isotropic Case ◽  
Anisotropic Damage ◽  
Secondary Creep ◽  
Continuum Damage ◽  
Anisotropic Creep

Past studies from creep tests on uniaxial specimens and Bridgman notch specimens, for a P91 weld metal, showed that anisotropic behaviour (more specifically transverse isotropy) occurs in the weld metal, both in terms of creep (steady-state) strain rate behaviour and rupture times (viz. damage evolution). This paper describes the development of a finite element (FE) continuum damage mechanics methodology to deal with anisotropic creep and anisotropic damage for weld metal. The method employs a second order damage tensor following the work of Murakami and Ohno [1] along with a novel rupture stress approach to define the evolution of this tensor, taking advantage of the transverse isotropic nature of the weld metal, to achieve a reduction in the number of material constants required from test data (and hence tests) to define the damage evolution. Hill’s anisotropy potential theory is employed to model the secondary creep. The theoretical model is implemented in a material behaviour subroutine within the general-purpose, non-linear FE code ABAQUS [2]. The validation of the implementation against established isotropic continuum damage mechanics solutions for the isotropic case is described. A procedure for calibrating the multiaxial damage constants from notched bar test data is described for multiaxial implementations. Also described is a study on the effect of uniaxial specimen orientation on anisotropic damage evolution.

scholarly journals Nonlocal Theories in Continuum Mechanics

10.14311/610 ◽  
2004 ◽  
Vol 44 (5-6) ◽  
Author(s):  
M. Jirásek
Keyword(s):  
Damage Mechanics ◽  
Continuum Theory ◽  
Nonlinear Behavior ◽  
Continuum Damage Mechanics ◽  
Internal Variable ◽  
Continuum Damage ◽  
Hardening Modulus ◽  
Wide Range ◽  
Discrete Media ◽  
Dynamic Phenomena

The purpose of this paper is to explain why the standard continuum theory fails to properly describe certain mechanical phenomena and how the description can be improved by enrichments that incorporate the influence of gradients or weighted spatial averages of strain or of an internal variable. Three typical mechanical problems that require such enrichments are presented: (i) dispersion of short elastic waves in heterogeneous or discrete media, (ii) size effects in microscale elastoplasticity, in particular with the size dependence of the apparent hardening modulus, and (iii) localization of strain and damage in quasibrittle structures and with the resulting transitional size effect. Problems covered in the examples encompass static and dynamic phenomena, linear and nonlinear behavior, and three constitutive frameworks, namely elasticity, plasticity and continuum damage mechanics. This shows that enrichments of the standard continuum theory can be useful in a wide range of mechanical problems. 

Homogenization Based 3D Continuum Damage Mechanics Model for Composites Undergoing Microstructural Debonding

2008 ◽  
Vol 75 (3) ◽  
Author(s):  
Jayesh R. Jain ◽  
Somnath Ghosh
Keyword(s):  
Fourth Order ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Interfacial Debonding ◽  
Material Behavior ◽  
Constitutive Law ◽  
Continuum Damage ◽  
Loading History ◽  
Model Framework ◽  
Mechanics Model

This paper develops a microscopic homogenization based continuum damage mechanics (HCDM) model framework for fiber reinforced composites undergoing interfacial debonding. It is an advancement over the 2D HCDM model developed by Raghavan and Ghosh (2005, “A Continuum Damage Mechanics Model for Unidirectional Composites Undergoing Interfacial Debonding,” Mech. Mater., 37(9), pp. 955–979), which does not yield accurate results for nonproportional loading histories. The present paper overcomes this shortcoming through the introduction of a principal damage coordinate system (PDCS) in the HCDM representation, which evolves with loading history. The material behavior is represented as a continuum constitutive law involving a fourth order orthotropic tensor with stiffness characterized as a macroscopic internal variable. The current work also extends the model of Raghavan and Ghosh to incorporate damage in 3D composites through functional forms of the fourth order damage tensor in terms of macroscopic strain components. The model is calibrated by homogenizing the micromechanical response of the representative volume element (RVE) for a few strain histories. This parametric representation can significantly enhance the computational efficiency of the model by avoiding the cumbersome strain space interpolations. The proposed model is validated by comparing the CDM results with homogenized micromechanical response of single and multiple fiber RVEs subjected to arbitrary loading history.

Sign in / Sign up

Export Citation Format

Share Document