An Anisotropic Creep Damage Model for Anisotropic Weld Metal

2008 ◽  
Vol 131 (2) ◽  
Author(s):  
S. Peravali ◽  
T. H. Hyde ◽  
K. A. Cliffe ◽  
S. B. Leen
Keyword(s):  
Weld Metal ◽  
Test Data ◽  
Damage Evolution ◽  
Damage Mechanics ◽  
Creep Damage ◽  
Continuum Damage Mechanics ◽  
Material Behavior ◽  
Anisotropic Damage ◽  
Continuum Damage ◽  
Anisotropic Creep

Past studies from creep tests on uniaxial specimens and Bridgman notch specimens, for a P91 weld metal, showed that anisotropic behavior (more specifically transverse isotropy) occurs in the weld metal, both in terms of creep (steady-state) strain rate behavior and rupture times (viz., damage evolution). This paper describes the development of a finite element (FE) continuum damage mechanics methodology to deal with anisotropic creep and anisotropic damage for weld metal. The method employs a second order damage tensor following the work of Murakami and Ohno (1980, “A Continuum Theory of Creep and Creep Damage,” Creep in Structures, A. R. S. Ponter and D. R. Hayhurst, eds., Springer-Verlag, Berlin, pp. 422–444) along with a novel rupture stress approach to define the evolution of this tensor, taking advantage of the transverse isotropic nature of the weld metal, to achieve a reduction in the number of material constants required from test data (and hence tests) to define the damage evolution. Hill’s anisotropy potential theory is employed to model the secondary creep. The theoretical model is implemented in a material behavior subroutine within the general-purpose nonlinear FE code ABAQUS (ABAQUS User’s Manual, Version 6.6, 6006, Hibbitt, Karlsson and Sorenson, Inc., Providence, RI). The validation of the implementation against established isotropic continuum damage mechanics solutions for the isotropic case is described. A procedure for calibrating the multiaxial damage constants from notched bar test data is described for multiaxial implementations. Also described is a study on the effect of uniaxial specimen orientation on anisotropic damage evolution.

An Anisotropic Creep Damage Model for Anisotropic Weld Metal

2007 ◽  
Author(s):  
S. Peravali ◽  
T. H. Hyde ◽  
K. A. Cliffe ◽  
S. B. Leen
Keyword(s):  
Weld Metal ◽  
Test Data ◽  
Damage Evolution ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Isotropic Case ◽  
Anisotropic Damage ◽  
Secondary Creep ◽  
Continuum Damage ◽  
Anisotropic Creep

Past studies from creep tests on uniaxial specimens and Bridgman notch specimens, for a P91 weld metal, showed that anisotropic behaviour (more specifically transverse isotropy) occurs in the weld metal, both in terms of creep (steady-state) strain rate behaviour and rupture times (viz. damage evolution). This paper describes the development of a finite element (FE) continuum damage mechanics methodology to deal with anisotropic creep and anisotropic damage for weld metal. The method employs a second order damage tensor following the work of Murakami and Ohno [1] along with a novel rupture stress approach to define the evolution of this tensor, taking advantage of the transverse isotropic nature of the weld metal, to achieve a reduction in the number of material constants required from test data (and hence tests) to define the damage evolution. Hill’s anisotropy potential theory is employed to model the secondary creep. The theoretical model is implemented in a material behaviour subroutine within the general-purpose, non-linear FE code ABAQUS [2]. The validation of the implementation against established isotropic continuum damage mechanics solutions for the isotropic case is described. A procedure for calibrating the multiaxial damage constants from notched bar test data is described for multiaxial implementations. Also described is a study on the effect of uniaxial specimen orientation on anisotropic damage evolution.

Finite Element Simulation of the Creep Behavior of 2.25Cr-1Mo-0.25V Steel Based on Continuum Damage Mechanics

2015 ◽  
Vol 750 ◽  
pp. 266-271 ◽  
Author(s):  
Yu Zhou ◽  
Xue Dong Chen ◽  
Zhi Chao Fan ◽  
Yi Chun Han
Keyword(s):  
Genetic Algorithm ◽  
Finite Element ◽  
Creep Behavior ◽  
Constitutive Equations ◽  
Damage Evolution ◽  
Damage Mechanics ◽  
Creep Damage ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Element Simulation

The creep behavior of 2.25Cr-1Mo-0.25V ferritic steel was investigated using a set of physically-based creep damage constitutive equations. The material constants were determined according to the creep experimental data, using an efficient genetic algorithm. The user-defined subroutine for creep damage evolution was developed based on the commercial finite element software ANSYS and its user programmable features (UPFs), and the numerical simulation of the stress distribution and the damage evolution of the semi V-type notched specimen during creep were studied. The results showed that the genetic algorithm is a very efficient optimization approach for the parameter identification of the creep damage constitutive equations, and finite element simulation based on continuum damage mechanics can be used to analyze and predict the creep damage evolution under multi-axial stress states.

Notion of Continuum Damage Mechanics and its Application to Anisotropic Creep Damage Theory

1983 ◽  
Vol 105 (2) ◽  
pp. 99-105 ◽  
Author(s):  
S. Murakami
Keyword(s):  
Damage Mechanics ◽  
Creep Damage ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Damage State ◽  
Creep Theory ◽  
Damage Theory ◽  
Damaged Materials ◽  
Damage Tensor ◽  
Anisotropic Creep

After discussing the notion and the practical procedures of continuum damage mechanics, their utility is elucidated by applying them to formulate an anisotropic creep damage theory for nonsteady multiaxial states of stress. By taking account of the mechanisms of microstructural change of materials due to creep, it is shown that the creep damage state can be described by a second rank symmetric damage tensor, while the effects of material damage on creep deformation of damaged materials should be expressed by a fourth rank tensor formed from the damage tensor. Validity of the creep theory formulated in terms of these damage variables is examined by performing model tests. Specialization of the proposed theory is also discussed.

Creep Life Prediction of Aircraft Turbine Disc Alloy Using Continuum Damage Mechanics

2017 ◽  
Vol 38 (1) ◽  
pp. 25-30
Author(s):  
Yan-Feng Li ◽  
Zhisheng Zhang ◽  
Chenglin Zhang ◽  
Jie Zhou ◽  
Hong-Zhong Huang
Keyword(s):  
Numerical Analysis ◽  
Test Data ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Creep Model ◽  
Continuum Damage ◽  
Creep Life ◽  
Creep Life Prediction ◽  
Turbine Disc

Abstract This paper deals with the creep characteristics of the aircraft turbine disc material of nickel-base superalloy GH4169 under high temperature. From the perspective of continuum damage mechanics, a new creep life prediction model is proposed to predict the creep life of metallic materials under both uniaxial and multiaxial stress states. The creep test data of GH4169 under different loading conditions are used to demonstrate the proposed model. Moreover, from the perspective of numerical simulation, the test data with analysis results obtained by using the finite element analysis based on Graham creep model is carried out for comparison. The results show that numerical analysis results are in good agreement with experimental data. By incorporating the numerical analysis and continuum damage mechanics, it provides an effective way to accurately describe the creep damage process of GH4169.

Development of continuum damage in the creep rupture of notched bars

1984 ◽  
Vol 311 (1516) ◽  
pp. 103-129 ◽  
Keyword(s):  
New York ◽  
Damage Mechanics ◽  
Axial Stress ◽  
Numerical Procedure ◽  
Creep Damage ◽  
Continuum Damage Mechanics ◽  
Constant Load ◽  
Creep Rupture ◽  
Continuum Damage ◽  
Discrete Crack

The creep rupture of circumferentially notched, circular tension bars which are subjected to constant load for long periods at constant temperature is studied both experimentally and by using a time-iterative numerical procedure which describes the formation and growth of creep damage as a field quantity. The procedure models the development of failed or cracked regions of material due to the growth and linkage of grain boundary defects. Close agreement is shown between experimental and theoretical values of the representative rupture stress, of the zones of creep damage and of the development of cracks for circular (Bridgman, Studies in large plastic flow and fracture , New York: McGraw-Hill (1952)) and British Standard notched specimens (B.S. no. 3500 (1969)). The minimum section of the circular notch is shown to be subjected to relatively uniform states of multi-axial stress and damage while the B.S. notch is shown to be subjected to non-uniform stress and damage fields in which single cracks grow through relatively undamaged material. The latter situation is shown to be analogous to the growth of a discrete crack in a lightly damaged continuum. The continuum damage mechanics theory presented here is shown to be capable of accurately predicting these extreme types of behaviour.

Shakedown-Ratcheting Analysis of a Spherical Pressure Vessel by Anisotropic Continuum Damage Mechanics

2018 ◽  
Author(s):  
Ali Nayebi ◽  
Azam Surmiri ◽  
Hojjatollah Rokhgireh
Keyword(s):  
Pressure Vessel ◽  
Damage Mechanics ◽  
Kinematic Hardening ◽  
Continuum Damage Mechanics ◽  
Mapping Method ◽  
Anisotropic Damage ◽  
Continuum Damage ◽  
Interaction Diagram ◽  
Plastic Shakedown ◽  
Spherical Pressure

In cyclic loading and when plastic flow occurs, discontinuities grow. In this research, interaction diagram of Bree has been developed when the spherical pressure vessel contains discontinuities such as voids and microcracks. Bree’s diagram is used for ratcheting assessment of pressurized equipment in ASME III NH. Nature of these defects leads to an anisotropic damage. Anisotropic Continuum Damage Mechanics (CDM) is considered to account effects of these discontinuities on the behavior of the structure. Shakedown – ratcheting response of a hollow sphere under constant internal pressure and cyclic thermal loadings are studied by using anisotropic CDM theory coupled with nonlinear kinematic hardening of Armstrong-Frederick m’s model (A-F). Return mapping method is used to solve numerically the developed relations. Elastic, elastic shakedown, plastic shakedown and ratcheting regions are illustrated in the modified Bree’s diagram. Influence of anisotropic damage due to the plastic deformation is studied and it was shown that the plastic shakedown region is diminished because of the developed damage.

Development of “Material Specific” Creep Continuum Damage Mechanics-Based Constitutive Equations

2020 ◽  
Author(s):  
Ricardo Vega ◽  
Jaime A. Cano ◽  
Calvin M. Stewart
Keyword(s):  
Constitutive Model ◽  
Strain Rate ◽  
Creep Strain ◽  
Creep Deformation ◽  
Damage Evolution ◽  
Damage Mechanics ◽  
Constitutive Models ◽  
Continuum Damage Mechanics ◽  
Creep Strain Rate ◽  
Continuum Damage

Abstract The objective of this study is to introduce a method for creating “material specific” creep continuum damage mechanics-based constitutive models. Herein, material specific is defined as a constitutive model based on the mechanism-informed minimum creep strain rate (MCSR) equations found in deformation mechanism maps and calibrated to available material data. The material specific models are created by finding the best MCSR model for a dataset. Once the best MCSR model is found, the Monkman Grant inverse relationship between the MCSR and rupture time is employed to derive a rupture equation. The equations are substituted into continuum damage mechanics-based creep strain rate and damage evolution equations to furnish predictions of creep deformation and damage. Material specific modeling allows for the derivation of creep constitutive models that can better the material behavior specific to the available data of a material. The material specific framework is also advantageous since it has a systematic framework that moves from finding the best MCSR model, to rupture time, to damage evolution and, creep strain rate. Data for Alloy P91 was evaluated and a material specific constitutive model derived. The material specific model was able to accurately predict the MCSR, creep deformation, damage, and rupture of alloy P91.

scholarly journals Review of Creep Cavitation and Rupture of Low Cr Alloy and its Weldment

2013 ◽  
Vol 744 ◽  
pp. 407-411
Author(s):  
Qi Hua Xu ◽  
Qiang Xu ◽  
Yong Xin Pan ◽  
Michael Short
Keyword(s):  
High Temperature ◽  
Constitutive Equation ◽  
Damage Mechanics ◽  
Experimental Approach ◽  
Creep Damage ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Safe Operation ◽  
Computational Approaches ◽  
Creep Cavitation

This paper presents a review of creep cavitation and rupture of low Cr alloy and its weldment, particular in the heat-affected zone (HAZ). Creep damage is one of the serious problems for the high temperature industry. One of the computational approaches is continuum damage mechanics which has been developed and applied complementary to the experimental approach and assists in the safe operation. However, the existing creep damage constitutive equations are not developed specifically for low stress. Therefore, in order to form the physical bases for the development of creep damage constitutive equation, it is necessary to critically review the creep cavitation and rupture characteristics of low Cr alloy and its weldment.

Sign in / Sign up

Export Citation Format

Share Document