A Rotary Magnetic Damper Consisting of Several Sector Magnets and an Arbitrarily Shaped Conductor With a Circular Cavity

1986 ◽  
Vol 108 (4) ◽  
pp. 314-321
Author(s):  
Yasuo Karube ◽  
Kosuke Nagaya

In this paper, the damping force and the damping coefficient of a rotary magnetic damper consisting of several sector magnets and an arbitrarily shaped plate conductor with a circular cavity have been obtained theoretically. The unit step function is applied to solve the differential equations of the electromagnetic field, and the boundary condition of the outer arbitrarily shaped boundary of the plate conductor is satisfied directly by making use of the Fourier expansion collocation method. Numerical calculations have been carried out for the dimensionless damping coefficients with the variations of various factors such as the magnetic flux range, the outer shape and the radius of the inner circular cavity of the conductor, the position and the number of the magnets.

1984 ◽  
Vol 106 (1) ◽  
pp. 46-51 ◽  
Author(s):  
Kosuke Nagaya ◽  
Hiroyuki Kojima

Theoretical results for finding the damping coefficients of a magnetic damper consisting of a circular magnetic flux and an arbitrarily shaped conductor have been obtained. In the analysis the exact solution in polar coordinates for the governing equation of the electromagnetic fields is utilized. The boundary condition for arbitrarily shaped boundaries of the conductor is satisfied directly by means of the Fourier expansion collocation method. To discuss the accuracy of the present approximate results, the analysis also has been performed on damper consisting of a circular flux and a circular conductor. The comparison between the present results and the exact ones for the typical damper shows very good agreement.


2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Chi-Min Liu

The extended Stokes problems, which study the flow suddenly driven by relatively moving half-planes, are reexamined for the Oldroyd-B fluid. This topic has been studied (Liu, 2011) by applying the series expansion to calculate the inverse Laplace transform. The derived solution was correct but tough to perform the calculation due to the series expansion of infinite terms. Herein another approach, the contour integration, is applied to calculate the inversion. Moreover, the Heaviside unit step function is included into the boundary condition to ensure the consistence between boundary and initial conditions. Mathematical methods used herein can be applied to other fluids for the extended Stokes’ problems.


2019 ◽  
Vol 8 (2) ◽  
pp. 19-22
Author(s):  
A. N. Deepthi ◽  
N. R. Mangalambal

Classical Mathematics is not sufficient to justify some functions like Dirac’s delta function, Heaviside’s unit step function in the mathematical modelling of some physical problems. Mikio Sato introduced the concept of hyperfunction to explain such situations. He gave a new generalisation to such functions using the theory of complex analysis. Hyperfunctions have many applications in the field of differential equations that are related with the physical problems involving Heat equation, wave equation etc. Urs Graf applied various transforms to hyperfunctions. With the help of these transforms he solved differential equations in terms of hyperfunctions. In this paper we defined a norm to a subclass of the linear space of hyperfunctions. The completeness and separability properties of this subfamily of hyperfunctions are established in this paper. Hyperfunctions of bounded exponential growth with compact support are mainly considering here.We have developed the results using the defining function of the hyperfunction. Hence we give a normed space approach to the subfamily of hyperfunctions having bounded exponential growth with compact support.Mathematics Subject Classification: 46F15, 46BXX


1957 ◽  
Vol 61 (553) ◽  
pp. 46-47 ◽  
Author(s):  
W. J. Duncan

The solution of a set of m ordinary linear differential equations of the nth order having variable coefficients can be provided by the use of a set of m2 indicial admittances and the solution is derived from that given by the use of impulsive admittances. The indicial admittances are easily derived from the impulsive admittances and vice versa.An “indicial admittance” is a function representing the response of a system to an applied “input” in the form of a “unit step function” and the concept is due to Heaviside. When the indicial admittance is known, the response to an input which varies with time in an arbitrary manner can easily be found. Similarly, the response can easily be found when the “impulsive admittance” is known, where this is the response to a unit instantaneous impulsive input.


Actuators ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 34
Author(s):  
Guoliang Hu ◽  
Feng Zhou ◽  
Lifan Yu

The main issue addressed in this paper involves the magnetorheological (MR) valve increasing the pressure drop by changing the internal structure, which leads to the increase of dimension sizes and the easy blocking of the internal channel. Optimizing the design of the traditional radial MR valve without changing the internal structure and whole dimension size is indispensable. Firstly, a radial MR valve with single excitation coil was proposed. The mathematical models of the field-dependent pressure drop and viscosity pressure drop in fluid flow channels were deduced, and the calculation formula of pressure drop was also established. Then, ANSYS software was used to simulate and analyze the distributions of the magnetic flux lines and magnetic flux densities of the proposed radial MR valve. Subsequently, the radial MR valve was simulated and analyzed by using the ANSYS first-order and zero-order simulation tools. In addition, the experimental test bench of the proposed MR valve was setup, the static performance of pressure drop was tested, and the change of pressure drop of the optimal radial MR valve under different loads was studied, furthermore, the response time with current of the initial and optimal radial MR valve were also investigated. Finally, the dynamic performances of the optimal radial MR valve controlled cylinder system under different currents, frequencies and amplitudes were tested, respectively. The experimental results indicate that the total pressure drop of the initial valve is 1.842 MPa when the applied current is 1.8 A, and the total pressure drop of the optimal valve is 2.58 MPa, the increase is 40.07%. Meanwhile, the maximum damping force of the optimal radial MR valve controlled cylinder system can reach about 3.6 kN at the current of 1.25 A, which shows a better optimization effect of the optimal radial MR valve.


1971 ◽  
Vol 61 (4) ◽  
pp. 1009-1012 ◽  
Author(s):  
J. C. Savage

abstract The far-field radiation from a simple fault model is given by the radiation pattern associated with the appropriate strain nucleus (e.g., double couple) multiplied by a fault propagation factor. For a unilateral fault model the propagation factor is F ( c ; t ) = ζ bd [ H ( τ ) − H ( τ − ( L / ζ ) ( 1 − ( ζ / c ) cos ψ )) ] / ( 1 − ( ζ / c ) cos ψ ) where ξ is the velocity of fault propagation, b is the fault slip, d is the fault width, τ = t − r0/c, r0 is the distance of the observer from the initial point of faulting, c is the velocity of the seismic wave, H(τ) is the unit-step function, L is the length of the fault, and ψ the angle between r0 and the direction of fault propagation. This representation is valid for both subsonic and supersonic fault propagation. The latter case is important because Weertman (1969) has recently shown that spontaneous faulting may propagate at supersonic velocities. Because the propagation factor is always positive, the nodal planes for the radiation are the same as for the appropriate strain nucleus. Finally, it is shown by the application of this equation that the radiation from a screw dislocation segment is represented by the double-couple nucleus, not the compensated linear-vector dipole nucleus as recently suggested by Knopoff and Randall (1970).


2018 ◽  
Vol 7 (3) ◽  
pp. 31
Author(s):  
Rosa Virginia Hernández ◽  
Luis Fernando Mariño ◽  
Mawency Vergel

En este artículo se presenta la caracterización del conocimiento semántico evidenciado por un grupo de estudiantes en la representación externa a problemas de ecuaciones diferenciales lineales de segundo orden como modelos matemáticos. El trabajo fue cuantitativo de tipo exploratorio y descriptivo utilizando un cuestionario en la recolección de información. El soporte teórico que dio sentido al estudio fue el modelo de dos etapas propuesto por Mayer R. para la resolución de problemas matemáticos, el ciclo de modelación bajo la perspectiva cognitiva según Borromeo Ferri y la teoría de las representaciones de Goldin y Kaput. La investigación se centró específicamente en la fase de representación del modelo. Entre los principales hallazgos se destaca que cada participante hace su propia representación externa a conceptos como: sistema masa-resorte, peso, masa, punto de equilibrio, constante de elasticidad, punto de equilibrio, ley de Hooke, fuerza amortiguadora, fuerza externa, ley de Newton, entre otros. Se evidencian también dificultades en el tránsito del lenguaje natural al lenguaje matemático y la representación externa de cada una de los signos, símbolos o expresiones matemáticas inmersas en el problema de palabra, debido a que el resolutor tiene que construir un modelo mental de la situación real y plasmarlo en un modelo matemático. Lo anterior pone de manifiesto la importancia que tiene el conocimiento semántico en la etapa de traducción cuando se intentan resolver problemas como situaciones reales a modelar.Palabras clave: resolución de problemas, ciclos de modelación, problemas de palabra, representaciones externas, conocimiento extra matemático, modelación matemática. AbstractThis article presents the characterization of the semantic knowledge evidenced by a group of students in the external representation to problems of second order linear differential equations as mathematical models. The work was quantitative exploratory and descriptive using a questionnaire in the collection of information. The theoretical support that gave meaning to the study was the two-stage model proposed by Mayer R. for solving mathematical problems, the modeling cycle under the cognitive perspective according to Borromeo Ferri and the theory of representations of Goldin and Kaput. The research focused specifically on the representation phase of the model. Among the main findings is that each participant makes his own external representation to concepts such as: mass-spring system, weight, mass, equilibrium point, constant of elasticity, equilibrium point, Hooke's law, damping force, external force, law of Newton, among others. Difficulties are also evident in the transition from natural language to mathematical language and the external representation of each of the signs, symbols or mathematical expressions involved in the word problem, because the resolver has to construct a mental model of the real situation and translate it into a mathematical model. This demonstrates the importance of semantic knowledge in the translation stage when trying to solve problems as real situations to be modeledKeywords: problem solving, modeling cycles, word problems, external representations, extra mathematical knowledge, mathematical modeling.ResumoEste artigo apresenta a caracterização do conhecimento semântico evidenciado por um grupo de estudantes na representação externa a problemas de equações diferenciais lineares de segunda ordem como modelos matemáticos. O trabalho foi quantitativo exploratório e descritivo usando um questionário na coleta de informações. O suporte teórico que deu sentido ao estudo foi o modelo de dois estágios proposto por Mayer R. para resolver problemas matemáticos, o ciclo de modelagem sob a perspectiva cognitiva de acordo com Borromeo Ferri e a teoria das representações de Goldin e Kaput. A pesquisa focalizou especificamente a fase de representação do modelo. Entre os principais achados, cada participante faz sua própria representação externa para conceitos como: sistema de massa-mola, peso, massa, ponto de equilíbrio, constante de elasticidade, ponto de equilíbrio, lei de Hooke, força de amortecimento, força externa, lei de Newton, entre outros. As dificuldades também são evidentes na transição da linguagem natural para a linguagem matemática e a representação externa de cada um dos signos, símbolos ou expressões matemáticas envolvidas na palavra problema, porque o resolvedor tem que construir um modelo mental da situação real e traduzi-lo para um modelo matemático. Isso demonstra a importância do conhecimento semântico na fase de tradução ao tentar resolver problemas como situações reais a serem modeladas. ______________________________________________________ Palavras-chave: resolução de problemas, ciclos de modelagem, problemas de palavra, representação externa, conhecimento extra matemático, modelagem matemática


Author(s):  
Mikhail D. Malykh

A waveguide with a constant, simply connected section S is considered under the condition that the substance filling the waveguide is characterized by permittivity and permeability that vary smoothly over the section S, but are constant along the waveguide axis. Ideal conductivity conditions are assumed on the walls of the waveguide. On the basis of the previously found representation of the electromagnetic field in such a waveguide using 4 scalar functions, namely, two electric and two magnetic potentials, Maxwells equations are rewritten with respect to the potentials and longitudinal components of the field. It appears possible to exclude potentials from this system and arrive at a pair of integro-differential equations for longitudinal components alone that split into two uncoupled wave equations in the optically homogeneous case. In an optically inhomogeneous case, this approach reduces the problem of finding the normal modes of a waveguide to studying the spectrum of a quadratic self-adjoint operator pencil.


2021 ◽  
Vol 21 (2) ◽  
pp. 34-41
Author(s):  
K Sladicekova ◽  
M Bereta ◽  
J Misek ◽  
D Parizek ◽  
J Jakus

Abstract Background: Although the scientific community is extensively concerned with the effects of the EMF, the unambiguous explanation of its effects on living structures is still lacking. Goals: The goal of the study was to evaluate the effect of a low-frequency (LF) electromagnetic field (EMF) on the growth and multiplication of the yeast Saccharomyces cerevisiae. Methods: Yeast cells were exposed to a frequency of 900 Hz and a magnetic flux density of 2.3 mT. The duration of each experiment was 8 hours, in the beginning of the measurement the value of frequency, rms (root mean square) value of electric current (2 A), and magnetic flux density were fixed set on the exposure device. A paired experiment was performed, a sample exposed to EMF, and a sample shielded from the field. Subsequently, samples were taken every two hours, the number of cells was recorded, and then the concentration of the yeast cells was evaluated at time points. The time points reflected the exposure time of the samples exposed to EMF. Results: The results indicate that LF EMF at given parameters has an inhibitory effect on the growth and multiplication of yeast cells. Conclusion: Exposure to EMF can cause the differences in growth dynamics between cells exposed to the field and the unexposed ones.


Sign in / Sign up

Export Citation Format

Share Document