An Extended Continuation Problem for Bifurcation Analysis in the Presence of Constraints

Author(s):  
Harry Dankowicz ◽  
Frank Schilder

This paper presents an extended formulation of the basic continuation problem for implicitly defined, embedded manifolds in Rn. The formulation is chosen so as to allow for the arbitrary imposition of additional constraints during continuation and the restriction to selective parametrizations of the corresponding higher-codimension solution manifolds. In particular, the formalism is demonstrated to clearly separate between the essential functionality required of core routines in application-oriented continuation packages, on the one hand, and the functionality provided by auxiliary toolboxes that encode classes of continuation problems and user definitions that narrowly focus on a particular problem implementation, on the other hand. Several examples are chosen to illustrate the formalism and its implementation in the recently developed continuation core package COCO and auxiliary toolboxes, including the continuation of families of periodic orbits in a hybrid dynamical system with impacts and friction as well as the detection and constrained continuation of selected degeneracies characteristic of such systems, such as grazing and switching-sliding bifurcations.

Author(s):  
Harry Dankowicz ◽  
Frank Schilder

This paper presents an extended formulation of the basic continuation problem for implicitly-defined, embedded manifolds in Rn. The formulation is chosen so as to allow for the arbitrary imposition of additional constraints during continuation and the restriction to selective parametrizations of the corresponding higher-co-dimension solution manifolds. In particular, the formalism is demonstrated to clearly separate between the essential functionality required of core routines in application-oriented continuation packages, on the one hand; and the functionality provided by auxiliary toolboxes that encode classes of continuation problems and user-definitions that narrowly focus on a particular problem implementation, on the other hand. Several examples are chosen to illustrate the formalism and its implementation in the recently developed continuation package COCO and auxiliary toolboxes, including continuation of families of periodic orbits in a hybrid dynamical system with impacts and friction as well as detection and constrained continuation of selected degeneracies characteristic of such systems, such as grazing and switching-sliding bifurcations.


Author(s):  
Shahriar Aslani ◽  
Patrick Bernard

Abstract In the study of Hamiltonian systems on cotangent bundles, it is natural to perturb Hamiltonians by adding potentials (functions depending only on the base point). This led to the definition of Mañé genericity [ 8]: a property is generic if, given a Hamiltonian $H$, the set of potentials $g$ such that $H+g$ satisfies the property is generic. This notion is mostly used in the context of Hamiltonians that are convex in $p$, in the sense that $\partial ^2_{pp} H$ is positive definite at each point. We will also restrict our study to this situation. There is a close relation between perturbations of Hamiltonians by a small additive potential and perturbations by a positive factor close to one. Indeed, the Hamiltonians $H+g$ and $H/(1-g)$ have the same level one energy surface, hence their dynamics on this energy surface are reparametrisation of each other, this is the Maupertuis principle. This remark is particularly relevant when $H$ is homogeneous in the fibers (which corresponds to Finsler metrics) or even fiberwise quadratic (which corresponds to Riemannian metrics). In these cases, perturbations by potentials of the Hamiltonian correspond, up to parametrisation, to conformal perturbations of the metric. One of the widely studied aspects is to understand to what extent the return map associated to a periodic orbit can be modified by a small perturbation. This kind of question depends strongly on the context in which they are posed. Some of the most studied contexts are, in increasing order of difficulty, perturbations of general vector fields, perturbations of Hamiltonian systems inside the class of Hamiltonian systems, perturbations of Riemannian metrics inside the class of Riemannian metrics, and Mañé perturbations of convex Hamiltonians. It is for example well known that each vector field can be perturbed to a vector field with only hyperbolic periodic orbits, this is part of the Kupka–Smale Theorem, see [ 5, 13] (the other part of the Kupka–Smale Theorem states that the stable and unstable manifolds intersect transversally; it has also been studied in the various settings mentioned above but will not be discussed here). In the context of Hamiltonian vector fields, the statement has to be weakened, but it remains true that each Hamiltonian can be perturbed to a Hamiltonian with only non-degenerate periodic orbits (including the iterated ones), see [ 11, 12]. The same result is true in the context of Riemannian metrics: every Riemannian metric can be perturbed to a Riemannian metric with only non-degenerate closed geodesics, this is the bumpy metric theorem, see [ 1, 2, 4]. The question was investigated only much more recently in the context of Mañé perturbations of convex Hamiltonians, see [ 9, 10]. It is proved in [ 10] that the same result holds: if $H$ is a convex Hamiltonian and $a$ is a regular value of $H$, then there exist arbitrarily small potentials $g$ such that all periodic orbits (including iterated ones) of $H+g$ at energy $a$ are non-degenerate. The proof given in [ 10] is actually rather similar to the ones given in papers on the perturbations of Riemannian metrics. In all these proofs, it is very useful to work in appropriate coordinates around an orbit segment. In the Riemannian case, one can use the so-called Fermi coordinates. In the Hamiltonian case, appropriate coordinates are considered in [ 10,Lemma 3.1] itself taken from [ 3, Lemma C.1]. However, as we shall detail below, the proof of this Lemma in [ 3], Appendix C, is incomplete, and the statement itself is actually wrong. Our goal in the present paper is to state and prove a corrected version of this normal form Lemma. Our proof is different from the one outlined in [ 3], Appendix C. In particular, it is purely Hamiltonian and does not rest on the results of [ 7] on Finsler metrics, as [ 3] did. Although our normal form is weaker than the one claimed in [ 10], it is actually sufficient to prove the main results of [ 6, 10], as we shall explain after the statement of Theorem 1, and probably also of the other works using [ 3, Lemma C.1].


2019 ◽  
Vol 29 (04) ◽  
pp. 1950052
Author(s):  
Armands Gritsans

The lemniscate sine and cosine are solutions of a [Formula: see text]-equivariant planar Hamiltonian system for all of which nontrivial solutions are nonhyperbolic periodic orbits. The forward Euler scheme is applied to this system and the one-parameter discrete-time [Formula: see text]-equivariant cubic dynamical system is obtained. The discrete-time system depending upon a parameter exhibits rich dynamics: numerical simulation shows that the system has attracting closed invariant curves, multiple periodic orbits and attracting sets exhibiting chaotic behavior. The approximating system of ordinary differential equations is constructed. We discuss the existence of closed invariant curves for the discrete-time system.


2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Shengjun Li ◽  
Yuming Zhu

We study planar radially symmetric Keplerian-like systems with repulsive singularities near the origin and with some semilinear growth near infinity. By the use of topological degree theory, we prove the existence of two distinct families of periodic orbits; one rotates around the origin with small angular momentum, and the other one rotates around the origin with both large angular momentum and large amplitude.


Author(s):  
Björn Schenke ◽  
Viktor Avrutin ◽  
Michael Schanz

In this work, we investigate a piecewise-linear discontinuous scalar map defined on three partitions. This map is specifically constructed in such a way that it shows a recently discovered bifurcation scenario in its pure form. Owing to its structure on the one hand and the similarities to the nested period-adding scenario on the other hand, we denoted the new bifurcation scenario as nested period-incrementing bifurcation scenario. The new bifurcation scenario occurs in several physical and electronical systems but usually not isolated, which makes the description complicated. By isolating the scenario and using a suitable symbolic description for the asymptotically stable periodic orbits, we derive a set of rules in the space of symbolic sequences that explain the structure of the stable periodic domain in the parameter space entirely. Hence, the presented work is a necessary step for the understanding of the more complicated bifurcation scenarios mentioned above.


Author(s):  
Wonmo Kang ◽  
Phanikrishna Thota ◽  
Bryan Wilcox ◽  
Harry Dankowicz

This paper presents the application of a newly developed computational toolbox, TC-HAT(TCˆ), for bifurcation analysis of systems in which continuous-in-time dynamics are interrupted by discrete-in-time events, here referred to as hybrid dynamical systems. In particular, new results pertaining to the dynamic behavior of a sample hybrid dynamical system, an impact microactuator, are obtained using this software program. Here, periodic trajectories of the actuator with single or multiple impacts per period and associated saddle-node, period-doubling, and grazing bifurcation curves are documented. The analysis confirms previous analytical results regarding the presence of co-dimension-two grazing bifurcation points from which saddle-node and period-doubling bifurcation curves emanate.


2008 ◽  
Vol 18 (12) ◽  
pp. 3665-3678 ◽  
Author(s):  
JUN NISHIKAWA ◽  
KAZUTOSHI GOHARA

We studied a hybrid dynamical system composed of a higher module with discrete dynamics and a lower module with continuous dynamics. Two typical examples of this system were investigated from the viewpoint of dynamical systems. One example is a nonfeedback system whose higher module stochastically switches inputs to the lower module. The dynamics was characterized by attractive and invariant fractal sets with hierarchical clusters addressed by input sequences. The other example is a feedback system whose higher module switches in response to the states of the lower module at regular intervals. This system converged into various switching attractors that correspond to infinite switching manifolds, which define each feedback control rule at the switching point. We showed that the switching attractors in the feedback system are subsets of the fractal sets in the nonfeedback system. The feedback system can be considered an automaton that generates various sequences from the fractal set by choosing the typical switching manifold. We can control this system by adjusting the switching interval to determine the fractal set as a constraint and by adjusting the switching manifold to select the automaton from the fractal set. This mechanism might be the key to developing information processing that is neither too soft nor too rigid.


2018 ◽  
Vol 28 (10) ◽  
pp. 1850128 ◽  
Author(s):  
Jean-Marc Ginoux ◽  
Riccardo Meucci ◽  
Stefano Euzzor ◽  
Angelo di Garbo

Experimental study of a uni junction transistor (UJT) has enabled to show that this electronic component has the same features as the so-called “memristor”. So, we have used the memristor’s direct current (DC) [Formula: see text]–[Formula: see text] characteristic for modeling the UJT’s DC current–voltage characteristic. This has led us to confirm on the one hand, that the UJT is a memristor and, on the other hand, to propose a new four-dimensional autonomous dynamical system allowing to describe experimentally observed phenomena such as the transition from a limit cycle to torus breakdown.


2021 ◽  
Vol 31 (07) ◽  
pp. 2150112
Author(s):  
Jean-Marc Ginoux

Slow–fast dynamical systems, i.e. singularly or nonsingularly perturbed dynamical systems possess slow invariant manifolds on which trajectories evolve slowly. Since the last century various methods have been developed for approximating their equations. This paper aims, on the one hand, to propose a classification of the most important of them into two great categories: singular perturbation-based methods and curvature-based methods, and on the other hand, to prove the equivalence between any methods belonging to the same category and between the two categories. Then, a deep analysis and comparison between each of these methods enable to state the efficiency of the Flow Curvature Method which is exemplified with paradigmatic Van der Pol singularly perturbed dynamical system and Lorenz slow–fast dynamical system.


Author(s):  
Wonmo Kang ◽  
Bryan Wilcox ◽  
Harry Dankowicz ◽  
Phanikrishna Thota

This paper presents the application of a newly developed computational toolbox, TC-HAT (TCˆ), for bifurcation analysis of systems in which continuous-in-time dynamics are interrupted by discrete-in-time events, here referred to as hybrid dynamical systems. In particular, new results pertaining to the dynamic behavior of an example hybrid dynamical system, an impact microactuator, are obtained using this software program. Here, periodic trajectories of the actuator with single or multiple impacts per period and associated saddle-node, perioddoubling, and grazing bifurcation curves are documented. The analysis confirms previous analytical results regarding the presence of co-dimension-two grazing bifurcation points from which saddle-node and period-doubling bifurcation curves emanate.


Sign in / Sign up

Export Citation Format

Share Document