Fluid Flow Through Porous Metals

1951 ◽  
Vol 18 (1) ◽  
pp. 39-45 ◽  
Author(s):  
Leon Green ◽  
Pol Duwez
Keyword(s):  
Experimental Data ◽  
Reynolds Number ◽  
Porous Medium ◽  
Fluid Flow ◽  
Quadratic Equation ◽  
General Definition ◽  
Porous Metals ◽  
Flow Through ◽  
Definition Of

Abstract A method is outlined for correlating experimental data obtained in studies of the flow of gases and liquids through porous metals. The correlation is based upon the suggestion of Forcheimer that the pressure gradient attending the flow of a liquid through a porous medium can be expressed as a function of flow rate by a simple quadratic equation. An equation of this type defines two length parameters necessary for characterization of a porous structure and permits a general definition of the Reynolds number for a structure of arbitrary complexity.

scholarly journals A lattice-theoretic characterization of pure subgroups of Abelian groups

2021 ◽  
Author(s):  
M. Ferrara ◽  
M. Trombetti
Keyword(s):  
Abelian Group ◽  
Abelian Groups ◽  
Subgroup Lattice ◽  
General Definition ◽  
Short Paper ◽  
Theoretic Characterization ◽  
Definition Of

AbstractLet G be an abelian group. The aim of this short paper is to describe a way to identify pure subgroups H of G by looking only at how the subgroup lattice $$\mathcal {L}(H)$$ L ( H ) embeds in $$\mathcal {L}(G)$$ L ( G ) . It is worth noticing that all results are carried out in a local nilpotent context for a general definition of purity.

scholarly journals The Importance of Nanoparticles Addition in a Base Fluid Flow through a Porous Medium

2013 ◽  
Vol 8-9 ◽  
pp. 225-234
Author(s):  
Dalia Sabina Cimpean
Keyword(s):  
Porous Medium ◽  
Fluid Flow ◽  
Boundary Conditions ◽  
Mixed Convection ◽  
Mathematical Models ◽  
Base Fluid ◽  
Porous Matrix ◽  
Fluid Properties ◽  
Flow Through ◽  
Energy Equations

The present study is focused on the mixed convection fluid flow through a porous medium, when a different amount of nanoparticles is added in the base fluid. The nanofluid saturates the porous matrix and different situations of the flow between two walls are presented and discussed. Alternatively mathematical models are presented and discussed. A solution of a system which contains the momentum, Darcy and energy equations, together with the boundary conditions involved, is given. The behavior of different nanofluids, such thatAu-water, Ag-waterandFe-wateris graphically illustrated and compared with the previous results.The research target is to observe the substantial increase of the thermophysical fluid properties, when the porous medium issaturated by a nanofluid instead of a classical Newtonian fluid.

scholarly journals Chemical Entropy Generation and MHD Effects on the Unsteady Heat and Fluid Flow through a Porous Medium

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Gamal M. Abdel-Rahman Rashed
Keyword(s):  
Magnetic Field ◽  
Porous Medium ◽  
Fluid Flow ◽  
Entropy Generation ◽  
Lewis Number ◽  
Heat Transfer Fluid ◽  
Governing Equations ◽  
Flow Through ◽  
Heat And Fluid Flow ◽  
Chemical Reaction Parameter

Chemical entropy generation and magnetohydrodynamic effects on the unsteady heat and fluid flow through a porous medium have been numerically investigated. The entropy generation due to the use of a magnetic field and porous medium effects on heat transfer, fluid friction, and mass transfer have been analyzed numerically. Using a similarity transformation, the governing equations of continuity, momentum, and energy and concentration equations, of nonlinear system, were reduced to a set of ordinary differential equations and solved numerically. The effects of unsteadiness parameter, magnetic field parameter, porosity parameter, heat generation/absorption parameter, Lewis number, chemical reaction parameter, and Brinkman number parameter on the velocity, the temperature, the concentration, and the entropy generation rates profiles were investigated and the results were presented graphically.

Plastic Flow in Confined Porous Media of Complex Contours

1999 ◽  
Author(s):  
Mario F. Letelier ◽  
César E. Rosas
Keyword(s):  
Porous Medium ◽  
Porous Media ◽  
Fluid Flow ◽  
Theoretical Study ◽  
Perturbation Parameter ◽  
Resistance Coefficient ◽  
Boundary Perturbation ◽  
Bingham Plastic ◽  
Flow Through ◽  
Central Plug

Abstract A theoretical study of the fully developed fluid flow through a confined porous medium is presented. The fluid is described by the Bingham plastic model for small values of the yield number. The analysis allows for many admissible shapes of the wall contour. The velocity field is computed for several combination of relevant parameters, i.e., the yield number, Darcy resistance coefficient and the boundary perturbation parameter. The wall effect is especially highlighted and the characteristics of the central plug region as well. Plots of isovel curves and velocity profiles are included for a variety of flow and geometry parameters.

scholarly journals The transport of liquids in softwood: timber as a model porous medium

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
H. C. Burridge ◽  
G. Wu ◽  
T. Reynolds ◽  
D. U. Shah ◽  
R. Johnston ◽  
...  
Keyword(s):  
Experimental Data ◽  
Porous Medium ◽  
Fluid Flow ◽  
Transport Properties ◽  
Pore Space ◽  
Construction Material ◽  
Sustainable Construction ◽  
Natural Material ◽  
Full Potential ◽  
Treatment Processes

AbstractTimber is the only widely used construction material we can grow. The wood from which it comes has evolved to provide structural support for the tree and to act as a conduit for fluid flow. These flow paths are crucial for engineers to exploit the full potential of timber, by allowing impregnation with liquids that modify the properties or resilience of this natural material. Accurately predicting the transport of these liquids enables more efficient industrial timber treatment processes to be developed, thereby extending the scope to use this sustainable construction material; moreover, it is of fundamental scientific value — as a fluid flow within a natural porous medium. Both structural and transport properties of wood depend on its micro-structure but, while a substantial body of research relates the structural performance of wood to its detailed architecture, no such knowledge exists for the transport properties. We present a model, based on increasingly refined geometric parameters, that accurately predicts the time-dependent ingress of liquids within softwood timber, thereby addressing this long-standing scientific challenge. Moreover, we show that for the minimalistic parameterisation the model predicts ingress with a square-root-of-time behaviour. However, experimental data show a potentially significant departure from this $$\sqrt{{\boldsymbol{t}}}$$t behaviour — a departure which is successfully predicted by our more advanced parametrisation. Our parameterisation of the timber microstructure was informed by computed tomographic measurements; model predictions were validated by comparison with experimental data. We show that accurate predictions require statistical representation of the variability in the timber pore space. The collapse of our dimensionless experimental data demonstrates clear potential for our results to be up-scaled to industrial treatment processes.

Nonstationary micropolar fluid flow through porous medium

1997 ◽  
Vol 30 (5) ◽  
pp. 3171-3178 ◽  
Author(s):  
Ibrahim Aganovic ◽  
Zvonimir Tutek
Keyword(s):  
Porous Medium ◽  
Fluid Flow ◽  
Micropolar Fluid ◽  
Micropolar Fluid Flow ◽  
Flow Through
Sign in / Sign up

Export Citation Format

Share Document