Novel Model for Partial-Slip Contact Involving a Material With Inhomogeneity

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Zhanjiang Wang ◽  
Xiaoqing Jin ◽  
Leon M. Keer ◽  
Qian Wang
Keyword(s):  
Half Space ◽  
Three Dimensional ◽  
Elastic Half Space ◽  
Partial Slip ◽  
Fast Method ◽  
Contact Center ◽  
Displacement Fields ◽  
Equivalent Inclusion Method ◽  
Equivalent Inclusion ◽  
Parametric Studies

Contacts involving partial slip are commonly found at the interfaces formed by mechanical components. However, most theoretical investigations of partial slip are limited to homogeneous materials. This work proposes a novel and fast method for partial-slip contact involving a material with an inhomogeneity based on the equivalent inclusion method, where the inhomogeneity is replaced by an inclusion with properly chosen eigenstrains. The stress and displacement fields due to eigenstrains are formulated based on the half-space inclusion solutions recently derived by the authors and solved with a three-dimensional fast Fourier transform algorithm. The effectiveness and accuracy of the proposed method is demonstrated by comparing its solutions with those from the finite element method. The partial slip contact between an elastic ball and an elastic half space containing a cuboidal inhomogeneity is further investigated. A number of in-depth parametric studies are performed for the cuboidal inhomogeneity with different sizes and at different locations. The results reveal that the contact behavior of the inhomogeneous material is more strongly influenced by the inhomogeneity when it is closer to the contact center and when its size is larger.

Numerical Modeling of Partial Slip Contact Involving Inhomogeneous Materials

2012 ◽  
Author(s):  
Zhanjiang Wang ◽  
Xiaoqing Jin ◽  
Leon M. Keer ◽  
Qian Wang
Keyword(s):  
Half Space ◽  
Three Dimensional ◽  
Elastic Half Space ◽  
Partial Slip ◽  
Inhomogeneous Materials ◽  
Displacement Fields ◽  
Homogeneous Solutions ◽  
Equivalent Inclusion Method ◽  
Equivalent Inclusion ◽  
Stress And Displacement Fields

When solving the problems involving inhomogeneous materials, the influence of the inhomogeneity upon contact behavior should be properly considered. This research proposes a fast and novel method, based on the equivalent inclusion method where inhomogeneity is replaced by an inclusion with properly chosen eigenstrains, to simulate contact partial slip of the interface involving inhomogeneous materials. The total stress and displacement fields represent the superposition of homogeneous solutions and perturbed solutions due to the chosen eigenstrains. In the present numerical simulation, the half space is meshed into a number of cuboids of the same size, where each cuboid is has a uniform eigenstrain. The stress and displacement fields due to eigenstrains are formulated by employing the recent half-space inclusion solutions derived by the authors and solved using a three-dimensional fast Fourier transform algorithm. The partial slip contact between an elastic ball and an elastic half space containing a cuboidal inhomogeneity was investigated.

A Fast Approximate Method for Heat Conduction in an Inhomogeneous Half-Space Subjected to Frictional Heating

2018 ◽  
Vol 140 (4) ◽  
Author(s):  
Xiujiang Shi ◽  
Liqin Wang ◽  
Qinghua Zhou ◽  
Qian Wang
Keyword(s):  
Heat Conduction ◽  
Half Space ◽  
Frictional Heating ◽  
Three Dimensional ◽  
Frictional Heat ◽  
Three Dimensional Model ◽  
Equivalent Inclusion Method ◽  
Influence Coefficients ◽  
Parametric Studies ◽  
Combined Algorithm

This paper reports a new three-dimensional model for heat conduction in a half-space containing inhomogeneities, applicable to frictional heat transfer, together with a novel combined algorithm of the equivalent inclusion method (EIM) and the imaging inclusion approach for building this model. The influence coefficients (ICs) for temperature and heat flux are obtained via converting the frequency response function (FRF) and integrating Green's function. The model solution is based on the discrete convolution and fast Fourier transform (DC-FFT) algorithm using the ICs, convenient for solving problems involving multiple elliptical inhomogeneities with arbitrary orientations. A group of parametric studies are conducted for understanding the thermal fields in the inhomogeneous half-space due to surface frictional heating, influenced by the properties of the inhomogeneity, its depth, and orientation.

Guided Surface Waves on an Elastic Half Space

1971 ◽  
Vol 38 (4) ◽  
pp. 899-905 ◽  
Author(s):  
L. B. Freund
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Body Wave ◽  
Three Dimensional ◽  
Elastic Half Space ◽  
Normal Displacement ◽  
Rigid Barrier ◽  
Wave Disturbances

Three-dimensional wave propagation in an elastic half space is considered. The half space is traction free on half its boundary, while the remaining part of the boundary is free of shear traction and is constrained against normal displacement by a smooth, rigid barrier. A time-harmonic surface wave, traveling on the traction free part of the surface, is obliquely incident on the edge of the barrier. The amplitude and the phase of the resulting reflected surface wave are determined by means of Laplace transform methods and the Wiener-Hopf technique. Wave propagation in an elastic half space in contact with two rigid, smooth barriers is then considered. The barriers are arranged so that a strip on the surface of uniform width is traction free, which forms a wave guide for surface waves. Results of the surface wave reflection problem are then used to geometrically construct dispersion relations for the propagation of unattenuated guided surface waves in the guiding structure. The rate of decay of body wave disturbances, localized near the edges of the guide, is discussed.

Effective Stiffness of a Debonded Particle in Particulate Composites

2007 ◽  
Vol 334-335 ◽  
pp. 33-36 ◽  
Author(s):  
Akihiro Wada ◽  
Yusuke Nagata ◽  
Shi Nya Motogi
Keyword(s):  
Three Dimensional ◽  
Particulate Composite ◽  
Spherical Particles ◽  
Particulate Composites ◽  
Particle Volume ◽  
Equivalent Inclusion Method ◽  
Equivalent Inclusion ◽  
Load Carrying ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

In this study, partially debonded spherical particles in a particulate composite are analyzed by three-dimensional finite element method to investigate their load carrying capacities, and the way to replace a debonded particle with an equivalent inclusion is examined. The variation in Young’s modulus and Poisson’s ratio of a composite with the debonded angle was evaluated for different particle arrangements and particle volume fractions, which in turn compared with the results derived from the equivalent inclusion method. Consequently, it was found that by replacing a debonded particle with an equivalent orthotropic one, the macroscopic behavior of the damaged composite could be reproduced so long as the interaction between neighboring particles is negligible.

Elastic solution of a polyhedral particle with a polynomial eigenstrain and particle discretization

2021 ◽  
pp. 1-35
Author(s):  
Chunlin Wu ◽  
Liangliang Zhang ◽  
Huiming Yin
Keyword(s):  
Taylor Series ◽  
Three Dimensional ◽  
Stress Singularity ◽  
Elastic Field ◽  
Analytical Form ◽  
Tetrahedral Elements ◽  
Equivalent Inclusion Method ◽  
Equivalent Inclusion ◽  
Eshelby’S Tensor ◽  
Domain Discretization

Abstract The paper extends the recent work (JAM, 88, 061002, 2021) of the Eshelby's tensors for polynomial eigenstrains from a two dimensional (2D) to three dimensional (3D) domain, which provides the solution to the elastic field with continuously distributed eigenstrain on a polyhedral inclusion approximated by the Taylor series of polynomials. Similarly, the polynomial eigenstrain is expanded at the centroid of the polyhedral inclusion with uniform, linear and quadratic order terms, which provides tailorable accuracy of the elastic solutions of polyhedral inhomogeneity by using Eshelby's equivalent inclusion method. However, for both 2D and 3D cases, the stress distribution in the inhomogeneity exhibits a certain discrepancy from the finite element results at the neighborhood of the vertices due to the singularity of Eshelby's tensors, which makes it inaccurate to use the Taylor series of polynomials at the centroid to catch the eigenstrain at the vertices. This paper formulates the domain discretization with tetrahedral elements to accurately solve for eigenstrain distribution and predict the stress field. With the eigenstrain determined at each node, the elastic field can be predicted with the closed-form domain integral of Green's function. The parametric analysis shows the performance difference between the polynomial eigenstrain by the Taylor expansion at the centroid and the 𝐶0 continuous eigenstrain by particle discretization. Because the stress singularity is evaluated by the analytical form of the Eshelby's tensor, the elastic analysis is robust, stable and efficient.

A Fast Method for Solving Contact Plasticity in a Half Space

2011 ◽  
Author(s):  
Zhanjiang Wang ◽  
Xiaoqing Jin ◽  
Shuangbiao Liu ◽  
Leon M. Keer ◽  
Jian Cao ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Residual Stresses ◽  
Fast Fourier Transform ◽  
Half Space ◽  
Three Dimensional ◽  
New Method ◽  
Fast Method ◽  
Discrete Convolution ◽  
Influence Coefficients ◽  
The One

This paper presents a new method of contact plasticity analysis based on Galerkin vectors to solve the eigenstresses due to eigenstrain. The influence coefficients relating eigenstrains to eigenstresses thus can be divided into four terms the one due to the eigenstrains in the full space, others due to the mirrored eigenstrains in the mirror half space. Each term can be solved fast and efficient by using the three-dimensional discrete convolution and fast Fourier transform (DC-FFT) or the three-dimensional discrete correlation and fast Fourier transform (DCR-FFT). The new method is used to analyze the contact plastic residual stresses in half space.

scholarly journals Surface waves in multilayered elastic media I. Rayleigh and Love waves from buried sources in a multilayered elastic half-space

1964 ◽  
Vol 54 (2) ◽  
pp. 627-679
Author(s):  
David G. Harkrider
Keyword(s):  
Surface Waves ◽  
Frequency Domain ◽  
Half Space ◽  
Rayleigh Waves ◽  
Elastic Half Space ◽  
Love Waves ◽  
Displacement Fields ◽  
Matrix Formulation ◽  
Total Displacement ◽  
Rayleigh And Love Waves

ABSTRACT A matrix formulation is used to derive integral expressions for the time transformed displacement fields produced by simple sources at any depth in a multilayered elastic isotropic solid half-space. The integrals are evaluated for their residue contribution to obtain surface wave displacements in the frequency domain. The solutions are then generalized to include the effect of a surface liquid layer. The theory includes the effect of layering and source depth for the following: (1) Rayleigh waves from an explosive source, (2) Rayleigh waves from a vertical point force, (3) Rayleigh and Love waves from a vertical strike slip fault model. The latter source also includes the effect of fault dimensions and rupture velocity. From these results we are able to show certain reciprocity relations for surface waves which had been previously proved for the total displacement field. The theory presented here lays the ground work for later papers in which theoretical seismograms are compared with observations in both the time and frequency domain.

Contact Stress Analysis of a Layered Transversely Isotropic Half-Space

1992 ◽  
Vol 114 (2) ◽  
pp. 253-261 ◽  
Author(s):  
C. H. Kuo ◽  
L. M. Keer
Keyword(s):  
Half Space ◽  
Mixed Boundary ◽  
Contact Region ◽  
Three Dimensional ◽  
Transversely Isotropic ◽  
Hankel Transform ◽  
Elastic Half Space ◽  
Contact Stresses ◽  
Stress Components ◽  
Contact Failure

The three-dimensional problem of contact between a spherical indenter and a multi-layered structure bonded to an elastic half-space is investigated. The layers and half-space are assumed to be composed of transversely isotropic materials. By the use of Hankel transforms, the mixed boundary value problem is reduced to an integral equation, which is solved numerically to determine the contact stresses and contact region. The interior displacement and stress fields in both the layer and half-space can be calculated from the inverse Hankel transform used with the solved contact stresses prescribed over the contact region. The stress components, which may be related to the contact failure of coatings, are discussed for various coating thicknesses.

Transient Thermoelastic Stress Fields in a Half-Space

2002 ◽  
Vol 125 (1) ◽  
pp. 33-43 ◽  
Author(s):  
Shuangbiao Liu ◽  
Qian Wang
Keyword(s):  
Stress Field ◽  
Half Space ◽  
Frictional Heating ◽  
Three Dimensional ◽  
Thermoelastic Stress ◽  
Parabolic Type ◽  
Elastic Half Space ◽  
Transform Method ◽  
Rough Surface Contact ◽  
Thermoelastic Stress Field

Computing the thermoelastic stress field of a material subjected to frictional heating is essential for component failure prevention and life prediction. However, the analysis for three-dimensional thermoelastic stress field for tribological problems is not well developed. Furthermore, the pressure distribution due to rough surface contact is irregular; hence the frictional heating can hardly be described by an analytical expression. This paper presents a novel set of frequency-domain expressions (frequency response functions) of the thermoelastic stress field of a uniformly moving three-dimensional elastic half-space subjected to arbitrary transient frictional heating, where the velocity of the half-space, its magnitude and direction, can be an arbitrary function of time. General formulas are expressed in the form of time integrals, and important expressions for constant velocities are given for the transient-instantaneous, transient-continuous, and steady-state cases. The thermoelastic stress field inside a translating half-space with constant velocities are illustrated and discussed by using the discrete convolution and fast Fourier transform method when a parabolic type or an irregularly distributed heat source is applied.

The Transition Matrix Formalism for the Scattering of an Alluvium on an Elastic Half-Space

2007 ◽  
Author(s):  
Wen-I Liao ◽  
Tsung-Jen Teng ◽  
Shiang-Jung Wang
Keyword(s):  
Half Space ◽  
Transition Matrix ◽  
Plane Waves ◽  
Three Dimensional ◽  
Scattering Matrix ◽  
Elastic Half Space ◽  
Basis Functions ◽  
Matrix Formalism ◽  
T Matrix ◽  
Singular Wave

This paper develops the transition matrix formalism for scattering from an three-dimensional alluvium on an elastic half-space. Betti’s third identity is employed to establish orthogonality conditions among basis functions that are Lamb’s singular wave functions. The total displacements and associated tractions exterior and interior to the surface are expanded in a Rayleigh series. The boundary conditions are applied and the T-matrix is derived. A linear transformation is utilized to construct a set of orthogonal basis functions. The transformed T-matrix is related to the scattering matrix and it is shown that the scattering matrix is symmetric and unitary and that the T-matrix is symmetric. Typical numerical results obtained by incident plane waves for verification are presented.

Sign in / Sign up

Export Citation Format

Share Document