Nozzle Geometry Effect on Stratified Layer Erosion by Vertical Turbulent Jet

2017 ◽  
Vol 3 (3) ◽  
Author(s):  
L. Ishay ◽  
U. Bieder ◽  
G. Ziskind ◽  
A. Rashkovan
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Jet Impingement ◽  
Turbulent Jets ◽  
Turbulent Jet ◽  
Severe Accident ◽  
Nozzle Geometry ◽  
Correct Prediction ◽  
Jet Mixing ◽  
Jet Behavior

Knowledge of the nuclear power plants (NPPs) containment atmosphere composition in the course of a severe accident is crucial for the effective design and positioning of the hydrogen explosion countermeasures. This composition strongly depends on containment flows which may include turbulent jet mixing in the presence of buoyancy, jet impingement onto the stratified layer, stable stratification layer erosion, steam condensation on the walls of the containment, condensation by emergency spray systems and other processes. Thus, in modeling of containment flows, it is essential to correctly predict these effects. In particular, a proper prediction of the turbulent jet behavior before it reaches the stably stratified layer is critical for the correct prediction of its mixing and impingement. Accordingly, validation study is presented for free neutral and buoyancy-affected turbulent jets, based on well-known experimental results from the literature. This study allows for the choice of a proper turbulence model to be applied for containment flow simulations. Furthermore, the jet behavior strongly depends on the issuing geometry. A comparative study of erosion process for the conditions similar to the ones of international benchmark exercise (IBE-3) is presented for different jet nozzle shapes.

scholarly journals A decision-support approach to severe accident management in nuclear power plants

2020 ◽  
pp. 1-12
Author(s):  
Marko Bohanec ◽  
Ivan Vrbanić ◽  
Ivica Bašić ◽  
Klemen Debelak ◽  
Luka Štrubelj
Keyword(s):  
Decision Support ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Severe Accident ◽  
Accident Management

scholarly journals A Conceptual Approach to Eliminate Bypass Release of Fission Products by In-Containment Relief Valve under SGTR Accident

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Taeseok Kim ◽  
Wonjun Choi ◽  
Joongoo Jeon ◽  
Nam Kyung Kim ◽  
Hoichul Jung ◽  
...  
Keyword(s):  
Steam Generator ◽  
Nuclear Power ◽  
Power Plants ◽  
Fission Products ◽  
Mitigation Strategies ◽  
Severe Accident ◽  
Base Case ◽  
Conceptual Approach ◽  
Relief Valve ◽  
Radioactive Nuclides

During a hypothesized severe accident, a containment building is designed to act as a final barrier to prevent release of fission products to the environment in nuclear power plants. However, in a bypass scenario of steam generator tube rupture (SGTR), radioactive nuclides can be released to environment even if the containment is not ruptured. Thus, thorough mitigation strategies are needed to prevent such unfiltered release of the radioactive nuclides during SGTR accidents. To mitigate the consequence of the SGTR accident, this study was conducted to devise a conceptual approach of installing In-Containment Relief Valve (ICRV) from steam generator (SG) to the free space in the containment building and it was simulated by MELCOR code for numerical analysis. Simulation results show that the radioactive nuclides were not released to the environment in the ICRV case. However, the containment pressure increased more than the base case, which is a disadvantage of the ICRV. To minimize the negative effects of the ICRV, the ICRV linked to Reactor Drain Tank (RDT) and cavity flooding was performed. Because the overpressurization of containment is due to heat of ex-vessel corium, only cavity flooding was effective for depressurization. The conceptual design of the ICRV is effective in mitigating the SGTR accident.

Analyzing Droplet Size Distributions Inside a Self-Priming Venturi Scrubber for Filtered Containment Venting Systems

2018 ◽  
Author(s):  
P. Papadopoulos ◽  
T. Lind ◽  
H.-M. Prasser
Keyword(s):  
Droplet Size ◽  
High Speed ◽  
Nuclear Power ◽  
Power Plants ◽  
Gas Flow ◽  
Tube Bundle ◽  
Droplet Size Distribution ◽  
Severe Accident ◽  
Design Element ◽  
Venturi Scrubber

After the accident in the Fukushima Daiichi nuclear power plant, the interest of adding Filtered Containment Venting Systems (FCVS) on existing nuclear power plants to prevent radioactive releases to the environment during a severe accident has increased. Wet scrubbers are one possible design element which can be part of an FCVS system. The efficiency of this scrubber type is thereby depending, among others, on the thermal-hydraulic characteristics inside the scrubber. The flow structure is mainly established by the design of the gas inlet nozzle. The venturi geometry is one of the nozzle types that can be found in nowadays FCVS. It acts in two different steps on the removal process of the contaminants in the gas stream. Downstream the suction opening in the throat of the venturi, droplets are formed by atomization of the liquid film. The droplets are contributing to the capture of aerosols and volatile gases from the mixture coming from the containment. Studies state that the majority of the contaminants is scrubbed within this misty flow regime. At the top of the venturi, the gas stream is injected into the pool. The pressure drop at the nozzle exit leads to the formation of smaller bubbles, thus increasing the interfacial area concentration in the pool. In this work, the flow inside a full-scale venturi scrubber has been optically analyzed using shadowgraphy with a high-speed camera. The venturi nozzle was installed in the TRISTAN facility at PSI which was originally designed to investigate the flow dynamics of a tube rupture inside a full-length scale steam generator tube bundle. The data analysis was focused on evaluating the droplet size distribution and the Sauter mean diameter under different gas flow rates and operation modes. The scrubber was operated in two different ways, submerged and unsubmerged. The aim was to include the effect on the droplet sizes of using the nozzle in a submerged operation mode.

scholarly journals Spreading of Excellence in SARNET Network on Severe Accidents: The Education and Training Programme

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Sandro Paci ◽  
Jean-Pierre Van Dorsselaere
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Training Programme ◽  
Education And Training ◽  
Severe Accident ◽  
Research Network ◽  
Safety Issues ◽  
Severe Accidents ◽  
Management Procedures ◽  
And Training

The SARNET2 (severe accidents Research NETwork of Excellence) project started in April 2009 for 4 years in the 7th Framework Programme (FP7) of the European Commission (EC), following a similar first project in FP6. Forty-seven organisations from 24 countries network their capacities of research in the severe accident (SA) field inside SARNET to resolve the most important remaining uncertainties and safety issues on SA in water-cooled nuclear power plants (NPPs). The network includes a large majority of the European actors involved in SA research plus a few non-European relevant ones. The “Education and Training” programme in SARNET is a series of actions foreseen in this network for the “spreading of excellence.” It is focused on raising the competence level of Master and Ph.D. students and young researchers engaged in SA research and on organizing information/training courses for NPP staff or regulatory authorities (but also for researchers) interested in SA management procedures.

Reliability Monitor for PWR Safety System Using FMEA and Go-Flow Methodology: Application of Risk Monitor for Nuclear Power Plants

2013 ◽  
Author(s):  
Muhammad Hashim ◽  
Hidekazu Yoshikawa ◽  
Takeshi Matsuoka ◽  
Ming Yang
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fault Tree Analysis ◽  
Reliability Evaluation ◽  
Safety System ◽  
Severe Accident ◽  
Monitor System ◽  
Dynamic Reliability ◽  
Defense In Depth ◽  
Risk Monitor

Author’s proposed risk monitor system of Nuclear Power Plant (NPP) is based on the idea of Plant Defense-in-Depth (DiD) risk monitor and reliability monitor to monitor what degree of safety functions incorporated in the plant system is maintained by multiple barriers of Defense-in-Depth (DiD). In the risk monitor system, the range of risk state is not limited in core damage accident but includes all kinds of dangerous states brought by severe accident. In present study, method of the reliability monitor of a risk monitor system is applied to the PWR safety system in order to evaluate the risk state numerically by pursuing all conditions of reliability evaluation given by plant DiD risk monitor. Large break LOCA is taken as an initiating accident event and the implementation of method of the reliability monitor is discussed in detail for single loop PWR safety system by considering the Multilevel Flow Model (MFM), Failure Mode and Effect Analysis (FMEA), and the qualitative reliability evaluation by Fault Tree Analysis (FTA) and the dynamic reliability evaluation by GO-FLOW. The summary of reliability results of PWR safety subsystems are also presented.

Proposal for Evaluation With Strain-Based Criterion of Impact Phenomena Between Steel Structure and Tornado Missile

2016 ◽  
Author(s):  
Yuko Sakamoto ◽  
Koji Shirai ◽  
Toshiko Udagawa ◽  
Shunsuke Kondo
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Impact Analysis ◽  
Structural Integrity ◽  
Steel Structures ◽  
Severe Accident ◽  
Numerical Code ◽  
Pressurized Water ◽  
Impact Phenomena ◽  
The Impact

In Japan, nuclear power plants must be protected from tornado missiles that are prescribed by Nuclear Regular Authority (NRA). When evaluating the structural integrity of steel structures in the plant with impact analysis by numerical code, strain-based criteria are appropriate because the tornado missiles have huge impact energy and may cause large deformation of the structures. As one of the strain-based criteria, the Japan Society of Mechanical Engineers (JSME) prescribes limiting triaxial strain for severe accident of Pressurized Water Reactor (PWR) steel containment. To confirm whether or not this criterion is appropriate to the evaluation of the impact phenomena between the steel structures and the tornado missiles, a free drop impact experiment to steel plates (carbon steel and austenitic stainless steel) was carried out with heavy weights imitated on one of the tornado missiles, followed by an impact analysis of the experiment with AUTODYN code and the JSME strain-based criterion. Consequently, it was confirmed that the strain-based criterion of JSME standard was for evaluating the fracture of steel structures caused by tornado missiles.

Issues Associated With the Development of Severe Accident Management Guidelines for NPPs in China

2013 ◽  
Author(s):  
Zhiyi Yang ◽  
Yimin Chong ◽  
Chun Li ◽  
Jian Deng ◽  
Xianhong Xu ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Severe Accident ◽  
Regulatory Body ◽  
Control Room ◽  
Technical Approach ◽  
Management Guidelines ◽  
Accident Management ◽  
Term Monitoring

After Fukushima nuclear accident, the Severe Accident Management Guidelines (SAMGs) are required according to the policy of the regulatory body in China. Most nuclear power plants (NPPs) in China adopt the technical approach of generic-SAMG of the Westinghouse Owner Group, consisting of severe accident control room guideline (SACRG), diagnostic flow chart (DFC), severe accident guideline (SAG), severe challenge status tree (SCST), severe challenge guideline (SCG), technical support center (TSC) long term monitoring guideline, and SAMG termination guideline (SAEG). A number of issues have been identified during the development of the SAMGs for M310+ NPPs, which is a dominant reactor type in China. The paper discussed these issues and identified some considerations for their resolution.

scholarly journals Analysis of Release Model Effect in the Transport of Fission Products Simulating the FPT3 Test Using MELCOR 2.1 and MELCOR 2.2

2021 ◽  
Vol 13 (14) ◽  
pp. 7964
Author(s):  
Alain Flores y Flores ◽  
Danilo Ferretto ◽  
Tereza Marková ◽  
Guido Mazzini
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fission Products ◽  
Nuclear Industry ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Accident Simulation ◽  
Experimental Facilities ◽  
The Difference

The severe accident integral codes such as Methods for Estimation of Leakages and Consequences of Releases (MELCOR) are complex tools used to simulate and analyse the progression of a severe accident from the onset of the accident up to the release from the containment. For this reason, these tools are developed in order to simulate different phenomena coupling models which can simulate simultaneously the ThermoHydraulic (TH), the physics and the chemistry. In order to evaluate the performance in the prediction of those complicated phenomena, several experimental facilities were built in Europe and all around the world. One of these facilities is the PHEBUS built by Institut de Radioprotection et de Sûrete Nucléaire (IRSN) in Cadarache. The facility reproduces the severe accident phenomena for a pressurized water reactor (PWR) on a volumetric scale of 1:5000. This paper aims to continue the assessment of the MELCOR code from version 2.1 up to version 2.2 underlying the difference in the fission product transport. The assessment of severe accident is an important step to the sustainability of the nuclear energy production in this period where the old nuclear power plants are more than the new reactors. The analyses presented in this paper focuses on models assessment with attention on the influence of B4C oxidation on the release and transport of fission products. Such phenomenon is a concern point in the nuclear industry, as was highlighted during the Fukushima Daiichi accident. Simulation of the source term is a key point to evaluate the severe accident hazard along with other safety aspects.

Sign in / Sign up

Export Citation Format

Share Document