Performance Effects of Leading Edge Tubercles on the NREL Phase VI Wind Turbine Blade

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Giada Abate ◽  
Dimitri N. Mavris ◽  
Lakshmi N. Sankar
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Variable Nature ◽  
Performance Effects ◽  
Computational Fluid Dynamics Cfd ◽  
Nrel Phase Vi ◽  
Positive Effect

Several studies on wind energy have been conducted to find possible solutions to power issues related to the variable nature of the wind. One of the most promising seems to be the application of sinusoidal modifications (tubercles) on the leading edge of wind turbine blades. In the present work, a systematic study on the effects of different tubercle configurations on NREL phase VI wind turbine performance is conducted. A design of experiments is used to generate blades with different tubercle amplitude and wavelength that are then simulated by a computational fluid dynamics (CFD) analysis. The resulting power and annual energy production (AEP) are compared with the baseline values noticing a positive effect of tubercles on the power at high wind speeds.

Leading edge erosion of wind turbine blades: Understanding, prevention and protection

2021 ◽  
Vol 169 ◽  
pp. 953-969
Author(s):  
Leon Mishnaevsky ◽  
Charlotte Bay Hasager ◽  
Christian Bak ◽  
Anna-Maria Tilg ◽  
Jakob I. Bech ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades

Experimental investigations of flow over NACA airfoils 0021 and 4412 of wind turbine blades with and without Tubercles

2021 ◽  
pp. 0309524X2110071
Author(s):  
Usman Butt ◽  
Shafqat Hussain ◽  
Stephan Schacht ◽  
Uwe Ritschel
Keyword(s):  
Wind Tunnel ◽  
Drag Coefficient ◽  
Wind Turbine ◽  
Critical Region ◽  
Lift Coefficient ◽  
Turbine Blades ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Experimental Investigations ◽  
Wind Turbine Blades

Experimental investigations of wind turbine blades having NACA airfoils 0021 and 4412 with and without tubercles on the leading edge have been performed in a wind tunnel. It was found that the lift coefficient of the airfoil 0021 with tubercles was higher at Re = 1.2×105 and 1.69×105 in post critical region (at higher angle of attach) than airfoils without tubercles but this difference relatively diminished at higher Reynolds numbers and beyond indicating that there is no effect on the lift coefficients of airfoils with tubercles at higher Reynolds numbers whereas drag coefficient remains unchanged. It is noted that at Re = 1.69×105, the lift coefficient of airfoil without tubercles drops from 0.96 to 0.42 as the angle of attack increases from 15° to 20° which is about 56% and the corresponding values of lift coefficient for airfoil with tubercles are 0.86 and 0.7 at respective angles with18% drop.

scholarly journals Review of Icing Effects on Wind Turbine in Cold Regions

2018 ◽  
Vol 72 ◽  
pp. 01007 ◽  
Author(s):  
Faizan Afzal ◽  
Muhammad S. Virk
Keyword(s):  
Wind Turbine ◽  
Structural Integrity ◽  
Turbine Blades ◽  
Leading Edge ◽  
Added Mass ◽  
Cold Climate ◽  
Ice Accretion ◽  
Wind Turbine Blades ◽  
Turbine Performance ◽  
Ice Shedding

This paper describes a brief overview of main issues related to atmospheric ice accretion on wind turbines installed in cold climate region. Icing has significant effects on wind turbine performance particularly from aerodynamic and structural integrity perspective, as ice accumulates mainly on the leading edge of the blades that change its aerodynamic profile shape and effects its structural dynamics due to added mass effects of ice. This research aims to provide an overview and develop further understanding of the effects of atmospheric ice accretion on wind turbine blades. One of the operational challenges of the wind turbine blade operation in icing condition is also to overcome the process of ice shedding, which may happen due to vibrations or bending of the blades. Ice shedding is dangerous phenomenon, hazardous for equipment and personnel in the immediate area.

Design and Analysis of Wind Turbine Blades: Winglet, Tubercle, and Slotted

2013 ◽  
Author(s):  
Alka Gupta ◽  
Abdulrahman Alsultan ◽  
R. S. Amano ◽  
Sourabh Kumar ◽  
Andrew D. Welsh
Keyword(s):  
Power Generation ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Alternative Energy ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Governing Factor

Energy is the heart of today’s civilization and the demand seems to be increasing with our growing population. Alternative energy solutions are the future of energy, whereas the fossil-based fuels are finite and deemed to become extinct. The design of the wind turbine blade is the main governing factor that affects power generation from the wind turbine. Different airfoils, angle of twist and blade dimensions are the parameters that control the efficiency of the wind turbine. This study is aimed at investigating the aerodynamic performance of the wind turbine blade. In the present paper, we discuss innovative blade designs using the NACA 4412 airfoil, comparing them with a straight swept blade. The wake region was measured in the lab with a straight blade. All the results with different designs of blades were compared for their performance. A complete three-dimensional computational analysis was carried out to compare the power generation in each case for different wind speeds. It was found from the numerical analysis that the slotted blade yielded the most power generation among the other blade designs.

scholarly journals Brief communication: Nowcasting of precipitation for leading-edge-erosion-safe mode

2020 ◽  
Vol 5 (3) ◽  
pp. 977-981 ◽  
Author(s):  
Anna-Maria Tilg ◽  
Charlotte Bay Hasager ◽  
Hans-Jürgen Kirtzel ◽  
Poul Hummelshøj
Keyword(s):  
Liquid Phase ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades ◽  
Spatio Temporal ◽  
The Impact ◽  
Theoretical Considerations ◽  
Mode A ◽  
Precipitation Events

Abstract. Leading-edge erosion (LEE) of wind turbine blades is caused by the impact of hydrometeors, which appear in a solid or liquid phase. A reduction in the wind turbine blades' tip speed during defined precipitation events can mitigate LEE. To apply such an erosion-safe mode, a precipitation nowcast is required. Theoretical considerations indicate that the time a raindrop needs to fall to the ground is sufficient to reduce the tip speed. Furthermore, it is described that a compact, vertically pointing radar that measures rain at different heights with a sufficiently high spatio-temporal resolution can nowcast rain for an erosion-safe mode.

scholarly journals CFD simulation on wind turbine blades with leading edge erosion

2021 ◽  
pp. 579-593
Author(s):  
Yan Wang ◽  
Liang Wang ◽  
Chenglin Duan ◽  
Jian Zheng ◽  
Zhe Liu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Cfd Simulation ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades
Sign in / Sign up

Export Citation Format

Share Document