Plastic Limit Pressure Solutions for Elbows With Slant Through-Wall Cracks

2020 ◽  
Vol 142 (5) ◽  
Author(s):  
Minkyu Kim ◽  
Jaehee Kim ◽  
Moon Ki Kim ◽  
Jae-Boong Choi ◽  
Nam-Su Huh ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Closed Form Solution ◽  
Limit Load ◽  
Form Solution ◽  
Fe Model ◽  
Plastic Limit ◽  
Critical Crack ◽  
Critical Crack Length ◽  
Limit Pressure ◽  
Plastic Limit Pressure

Abstract For leak-before-break (LBB) assessment, an idealized through-wall crack (TWC) is typically postulated to determine the critical crack length of cracked piping. However, such an idealization in terms of crack shape can lead to underestimations of plastic limit pressure. Although many studies have been performed to obtain accurate limit load solutions for cracked straight pipes by considering realistic crack geometries, there is still a lack of information regarding slant TWC at elbow. Therefore, three-dimensional finite element (FE) models of an elbow considering the effects of slant TWC on plastic limit pressure are developed. The proposed FE model and analysis procedure were verified through comparisons to the existing solutions for idealized TWCs in elbow. On this basis, the effect of slant TWC on the plastic limit pressure is analyzed, and a closed-form solution of the plastic limit pressure is proposed, for an elbow containing a longitudinal or a circumferential through-wall crack.

Plastic Limit Pressure of Pressurized Cylinders With Hillside Nozzle

2006 ◽  
Author(s):  
H. F. Wang ◽  
Z. F. Sang ◽  
L. P. Xue ◽  
G. E. O. Widera
Keyword(s):  
Finite Element ◽  
Limit Load ◽  
Experimental Models ◽  
Plastic Limit ◽  
Element Analysis ◽  
Design Guideline ◽  
Limit Pressure ◽  
Test Models ◽  
Scale Test ◽  
Plastic Limit Pressure

Cylinder-nozzle intersections are widely used in pressure vessel and piping industries. In order to get better mixing and energy exchange of the reactants, pipe-nozzle intersection with hillside nozzle is applied more and more widely. The purpose of this work is to investigate the plastic limit load of cylinders with hillside nozzle subjected to internal pressure. Three full-scale test models with different angles of the hillside nozzle were designed and fabricated specially for the test using strain gagues. 3-D finite element numerical simulations on the experimental models were performed. Based on both results, a group of basic data on plastic limit pressure defined by double elastic-slope method for cylinders with hillside nozzle is approximately obtained according to load-strain responses, and the plastic limit pressures determined by test and finite element analysis are in good agreement. The results indicate that the limit pressure increases with the increment of the angle of the hillside nozzle, and compared with radial nozzles in cylinders, the hillside nozzles have higher limit pressure, which can be served as the basis for developing a design guideline for pressurized cylinders with various angles of hillside nozzle.

scholarly journals Plastic limit load of ellipsoidal pressure vessel head with nozzle under internal pressure loading

2013 ◽  
Vol 18 (4) ◽  
pp. 1263-1274 ◽  
Author(s):  
V.N. Skopinsky ◽  
N.A. Berkov ◽  
A.B. Smetankin
Keyword(s):  
Finite Element ◽  
Internal Pressure ◽  
Limit Load ◽  
Rate Of Change ◽  
Pressure Loading ◽  
Plastic Limit ◽  
Elastic Plastic ◽  
Limit Pressure ◽  
Plastic Limit Load ◽  
Plastic Limit Pressure

Abstract A new method and numerical procedure for determining the plastic limit load in an ellipsoid-cylinder intersection using the elastic-plastic finite element analysis are presented. The proposed method is based on the maximum criterion of the rate of change of the relative plastic work. For the elastic-plastic analysis of the nozzle connections the 2D finite element method and plasticity theory with strain hardening are used. The results of the comparison of the plastic limit pressure obtained on the basis of different known criteria and the proposed criterion are presented. A parametric study of ellipsoidal heads with a nozzle under internal pressure loading was performed. The effects of nondimensional geometric parameters of shell intersection on the plastic limit pressure are discussed.

Strength Behavior of Hot-Tapped Pipeline Under Internal Pressure Load

2011 ◽  
Vol 133 (5) ◽  
Author(s):  
B. H. Wu ◽  
Z. F. Sang ◽  
Z. L. Wang ◽  
G. E. O. Widera
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Internal Pressure ◽  
Three Dimensional ◽  
Plastic Limit ◽  
Element Analysis ◽  
Pressure Load ◽  
Limit Pressure ◽  
Strength Behavior ◽  
Plastic Limit Pressure

The objective of this study is to investigate the strength behavior and plastic limit pressure of hot-tapped pipelines under an internal pressure load. Two full scale test models were fabricated for the experiment. A three-dimensional nonlinear finite element analysis was also carried out. The plastic limit pressure was determined approximately by use of the twice the elastic-slope criterion. The results indicate that plastic limit pressures obtained by experiment and finite element analysis are in good agreement. On the basis of the above results, a parametric analysis of the plastic limit pressure was carried out and resulted in the development of formulas useful for the design of hot-tapped pipelines.

Analytical and Numerical Studies of a Thick Anisotropic Multilayered Fiber-Reinforced Composite Pressure Vessel

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Isaiah Ramos ◽  
Young Ho Park ◽  
Jordan Ulibarri-Sanchez
Keyword(s):  
Finite Element ◽  
Pressure Vessel ◽  
Structural Damage ◽  
Three Dimensional ◽  
Closed Form Solution ◽  
Form Solution ◽  
Fiber Reinforced ◽  
Element Analysis ◽  
Analytical Results ◽  
Composite Pressure Vessel

In this paper, we developed an exact analytical 3D elasticity solution to investigate mechanical behavior of a thick multilayered anisotropic fiber-reinforced pressure vessel subjected to multiple mechanical loadings. This closed-form solution was implemented in a computer program, and analytical results were compared to finite element analysis (FEA) calculations. In order to predict through-thickness stresses accurately, three-dimensional finite element meshes were used in the FEA since shell meshes can only be used to predict in-plane strength. Three-dimensional FEA results are in excellent agreement with the analytical results. Finally, using the proposed analytical approach, we evaluated structural damage and failure conditions of the composite pressure vessel using the Tsai–Wu failure criteria and predicted a maximum burst pressure.

scholarly journals SOLUTION OF THE MULTIDIMENSIONAL DIFFUSION EQUATION USING LIE SYMMETRIES: SIMULATION OF POLLUTANT DISPERSION IN THE ATMOSPHERE

2005 ◽  
Vol 4 (2) ◽  
Author(s):  
J. R. Zabadal ◽  
C. A. Poffal
Keyword(s):  
Differential Operators ◽  
Hybrid Methods ◽  
Formal Solution ◽  
Three Dimensional ◽  
Closed Form Solution ◽  
Pollutant Dispersion ◽  
Form Solution ◽  
Lie Symmetries ◽  
Advection Equation ◽  
Mean Values

Several analytical, numerical and hybrid methods are being used to solve diffusion and diffusion advection problems. In this work, a closed form solution of the three-dimensional diffusion advection equation in a Cartesian coordinate system is obtained by applying rules, based on the Lie symmetries, to manipulate the exponential of the differential operators that appear in its formal solution. There are many advantages of applying these rules: the increase in processing velocity so that the solution may be obtained in real time, the reduction in the amount of memory required to perform the necessary tasks in order to obtain the solution, since the analytical expressions can be easily manipulated in post-processing and also the discretization of the domain may not be necessary in some cases, avoiding the use of mean values for some parameters involved. These rules yield good results when applied to obtain solutions for problems in fluid mechanics and in quantum mechanics. In order to show the performance of the method, a one-dimensional scenario of the pollutant dispersion in a stable boundary layer is simulated, considering that the horizontal component of the velocity field is dominant and constant, disregarding the other components. The results are compared with data available in the literature.

Induction Proof for a General Exponential Integral Formula

1995 ◽  
Vol 80 (2) ◽  
pp. 424-426
Author(s):  
Frank O'Brien ◽  
Sherry E. Hammel ◽  
Chung T. Nguyen
Keyword(s):  
Closed Form ◽  
Integral Formula ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Closed Form Solution ◽  
Form Solution ◽  
Probability Method ◽  
Exponential Integral ◽  
Need To Evaluate ◽  
Three Dimensional Space

The authors' Poisson probability method for detecting stochastic randomness in three-dimensional space involved the need to evaluate an integral for which no appropriate closed-form solution could be located in standard handbooks. This resulted in a formula specifically calculated to solve this integral in closed form. In this paper the calculation is verified by the method of mathematical induction.

scholarly journals SOLUTION OF THE MULTIDIMENSIONAL DIFFUSION EQUATION USING LIE SYMMETRIES: SIMULATION OF POLLUTANT DISPERSION IN THE ATMOSPHERE

2005 ◽  
Vol 4 (2) ◽  
pp. 197
Author(s):  
J. R. Zabadal ◽  
C. A. Poffal
Keyword(s):  
Differential Operators ◽  
Hybrid Methods ◽  
Formal Solution ◽  
Three Dimensional ◽  
Closed Form Solution ◽  
Pollutant Dispersion ◽  
Form Solution ◽  
Lie Symmetries ◽  
Advection Equation ◽  
Mean Values

Several analytical, numerical and hybrid methods are being used to solve diffusion and diffusion advection problems. In this work, a closed form solution of the three-dimensional diffusion advection equation in a Cartesian coordinate system is obtained by applying rules, based on the Lie symmetries, to manipulate the exponential of the differential operators that appear in its formal solution. There are many advantages of applying these rules: the increase in processing velocity so that the solution may be obtained in real time, the reduction in the amount of memory required to perform the necessary tasks in order to obtain the solution, since the analytical expressions can be easily manipulated in post-processing and also the discretization of the domain may not be necessary in some cases, avoiding the use of mean values for some parameters involved. These rules yield good results when applied to obtain solutions for problems in fluid mechanics and in quantum mechanics. In order to show the performance of the method, a one-dimensional scenario of the pollutant dispersion in a stable boundary layer is simulated, considering that the horizontal component of the velocity field is dominant and constant, disregarding the other components. The results are compared with data available in the literature.

scholarly journals Reconstruction of three-dimensional maps based on closed-form solutions of the variational problem of multisensor data registration

2019 ◽  
Vol 484 (6) ◽  
pp. 672-677
Author(s):  
A. V. Vokhmintcev ◽  
A. V. Melnikov ◽  
K. V. Mironov ◽  
V. V. Burlutskiy
Keyword(s):  
Closed Form ◽  
Large Scale ◽  
Three Dimensional ◽  
Dynamic Environment ◽  
Closed Form Solution ◽  
Point Clouds ◽  
Accurate Method ◽  
Form Solution ◽  
Closed Form Solutions ◽  
Reconstruction Methods

A closed-form solution is proposed for the problem of minimizing a functional consisting of two terms measuring mean-square distances for visually associated characteristic points on an image and meansquare distances for point clouds in terms of a point-to-plane metric. An accurate method for reconstructing three-dimensional dynamic environment is presented, and the properties of closed-form solutions are described. The proposed approach improves the accuracy and convergence of reconstruction methods for complex and large-scale scenes.

Sign in / Sign up

Export Citation Format

Share Document