Utilization of NEK full scope simulator for plant operation optimization, nuclear education and engineering in 20 years

2021 ◽  
Author(s):  
Matjaž Žvar ◽  
Tomaž Žagar
Keyword(s):  
Emergency Preparedness ◽  
Nuclear Power ◽  
Impact Analysis ◽  
Training Session ◽  
Nuclear Safety ◽  
Severe Accident ◽  
Electricity Production ◽  
Pressurized Water Reactor ◽  
Spent Fuel ◽  
Pressurized Water

Abstract This paper gives an impact analysis of utilization of NPP full scope simulator on operation parameters, training and education in nuclear power plant Krško. The Slovenian Nuclear Safety Administration issued their simulator decree to NEK in April 1995. The first training session on the simulator was performed in April 17th 2000 and since then the simulator has been used on daily bases to improve operator knowledges, skills and performances. At the time, this was the first full scope simulator with the capability to simulate Beyond design basis accidents (severe accidents). The ability to simulate core meltdown and containment breach made it very suitable for emergency preparedness drills. After the 2017 simulator upgrade, fuel meltdown in the spent fuel pool can be simulated using the Modular Accident Analysis Program – MAAP5. This capability is still unique for full scope simulators even today. The simulator is also used for pre-testing of plant modifications before their implementation on site or for just-in-time training for infrequent performed evolutions or for procedure development and testing. The Pressurized Water Reactor Owners Group (PWROG) used the NEK simulator in 2018 to develop the new set of the Severe Accident Management Guidelines, incorporated with a completely new usage approach. In all of these years, the simulator has been actively participating in the increased reliability and stability of the electricity production and in achieving NEK's vision to be a worldwide leader in nuclear safety and excellence.

Study of the Ageing Effects on the Lower Head Failure in a PWR Reactor

2020 ◽  
Author(s):  
R. Lo Frano ◽  
S. Paci ◽  
P. Darnowski ◽  
P. Mazgaj
Keyword(s):  
Nuclear Power ◽  
Quantitative Estimation ◽  
Computer Code ◽  
Severe Accident ◽  
Symmetric Model ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Term Operation ◽  
Ageing Effects ◽  
Lower Head

Abstract The paper studies influence the ageing effects on the failure of a Reactor Pressure Vessel (RPV) during a severe accident with a core meltdown in a Nuclear Power Plant (NPP). The studied plant is a generic high-power Generation III Pressurized Water Reactor (PWR) developed in the frame of the EU NARSIS project. A Total Station Blackout (SBO) accident was simulated with MELCOR 2.2 severe accident integral computer code. Results of the analysis, temperatures in the lower head and pressures in the lower plenum were used as initial and boundary conditions for the Finite Element Method (FEM) simulations. Two FEM models were developed, a simple two-dimensional axis-symmetric model of the lower head to study fundamental phenomena and complex 3D model to include interactions with the RPV and reactor internals. Ageing effects of a lower head were incorporated into the FEM models to investigate its influence onto lower head response. The ageing phenomena are modelled in terms of degraded mechanical material properties as σ(T), E(T). The primary outcome of the study is the quantitative estimation of the influence of ageing process onto the timing of reactor vessel failure. Presented novel methodology and results can have an impact on future consideration about Long-Term Operation (LTO) of NPPs.

Proposal for Evaluation With Strain-Based Criterion of Impact Phenomena Between Steel Structure and Tornado Missile

2016 ◽  
Author(s):  
Yuko Sakamoto ◽  
Koji Shirai ◽  
Toshiko Udagawa ◽  
Shunsuke Kondo
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Impact Analysis ◽  
Structural Integrity ◽  
Steel Structures ◽  
Severe Accident ◽  
Numerical Code ◽  
Pressurized Water ◽  
Impact Phenomena ◽  
The Impact

In Japan, nuclear power plants must be protected from tornado missiles that are prescribed by Nuclear Regular Authority (NRA). When evaluating the structural integrity of steel structures in the plant with impact analysis by numerical code, strain-based criteria are appropriate because the tornado missiles have huge impact energy and may cause large deformation of the structures. As one of the strain-based criteria, the Japan Society of Mechanical Engineers (JSME) prescribes limiting triaxial strain for severe accident of Pressurized Water Reactor (PWR) steel containment. To confirm whether or not this criterion is appropriate to the evaluation of the impact phenomena between the steel structures and the tornado missiles, a free drop impact experiment to steel plates (carbon steel and austenitic stainless steel) was carried out with heavy weights imitated on one of the tornado missiles, followed by an impact analysis of the experiment with AUTODYN code and the JSME strain-based criterion. Consequently, it was confirmed that the strain-based criterion of JSME standard was for evaluating the fracture of steel structures caused by tornado missiles.

scholarly journals Analysis of Release Model Effect in the Transport of Fission Products Simulating the FPT3 Test Using MELCOR 2.1 and MELCOR 2.2

2021 ◽  
Vol 13 (14) ◽  
pp. 7964
Author(s):  
Alain Flores y Flores ◽  
Danilo Ferretto ◽  
Tereza Marková ◽  
Guido Mazzini
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fission Products ◽  
Nuclear Industry ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Accident Simulation ◽  
Experimental Facilities ◽  
The Difference

The severe accident integral codes such as Methods for Estimation of Leakages and Consequences of Releases (MELCOR) are complex tools used to simulate and analyse the progression of a severe accident from the onset of the accident up to the release from the containment. For this reason, these tools are developed in order to simulate different phenomena coupling models which can simulate simultaneously the ThermoHydraulic (TH), the physics and the chemistry. In order to evaluate the performance in the prediction of those complicated phenomena, several experimental facilities were built in Europe and all around the world. One of these facilities is the PHEBUS built by Institut de Radioprotection et de Sûrete Nucléaire (IRSN) in Cadarache. The facility reproduces the severe accident phenomena for a pressurized water reactor (PWR) on a volumetric scale of 1:5000. This paper aims to continue the assessment of the MELCOR code from version 2.1 up to version 2.2 underlying the difference in the fission product transport. The assessment of severe accident is an important step to the sustainability of the nuclear energy production in this period where the old nuclear power plants are more than the new reactors. The analyses presented in this paper focuses on models assessment with attention on the influence of B4C oxidation on the release and transport of fission products. Such phenomenon is a concern point in the nuclear industry, as was highlighted during the Fukushima Daiichi accident. Simulation of the source term is a key point to evaluate the severe accident hazard along with other safety aspects.

IVR Model Study for Passive PWR

2012 ◽  
Author(s):  
Hong Xu ◽  
Peng Zhang ◽  
Zhiwei Zhou
Keyword(s):  
Nuclear Power ◽  
Safety Evaluation ◽  
Sensitivity Study ◽  
Nuclear Safety ◽  
Reactor Vessel ◽  
Severe Accident ◽  
Plant Design ◽  
Layer Model ◽  
Pressurized Water ◽  
Exterior Surface

1000-MWe scale Pressurized Water Reactor (PWR) is taking service or under construction all over the world, and larger scale plant is studied and developed for its more competitive economics. Not only design basic accidents are analyzed for nuclear safety, the severe accident must also be considered to meet with the increasing requirement of safety. In the “nuclear power plant design safety regulation” (HAF102) issued by Nation Nuclear Safety Administration (NNSA), aim at the preventing and mitigating of severe accident, the regulation bring forward new requirement, which required that during design phase, NPP should consider setting the preventing and mitigation measurement of severe accident as actually as possible. As an approach to prevent the curium from melting down the vessel and entering the containment when a postulated severe accident occurs, In-vessel retention (IVR) of molten core debris via water cooling of the external surface of the reactor vessel has been introduced into AP1000. External reactor vessel cooling (ERVC) is assumed to be achieved keeping exterior surface of vessel at 400K. It is known to all that different scenario and process results in different IVR molten model. As the core melt, different IVR model is formed at different time, such as two-layer model, three-layer model and four layer model. It is necessary to study the IVR model when severe accident process moves on. This paper studies two-layer and three-layer IVR models and find the features of the models. Based on this, sensitivity study of important parameters has also been analyzed. It is useful for us to understand the mechanism of the molten pool. This paper has some directive significance on future IVR strategy research and also provides theoretical support to safety evaluation of PWR plants.

scholarly journals Radioactive Source Specification of Bushehr’s VVER-1000 Spent Fuels

2016 ◽  
Vol 2016 ◽  
pp. 1-4 ◽  
Author(s):  
Mahdi Rezaeian ◽  
Jamshid Kamali
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Initial Step ◽  
Total Activity ◽  
Radioactive Source ◽  
Pressurized Water Reactor ◽  
Spent Fuel ◽  
Pressurized Water

Due to high radioactivity and significant content of medium- and long-lived radionuclides, different operations with spent nuclear fuels (e.g., handling, transportation, and storage) shall be accompanied by suitable radiation protections. On the other hand, determination of radioactive source specification is the initial step for any radiation protection design. In this study, radioactive source specification of the spent fuels of Bushehr nuclear power plant, which is a VVER-1000 type pressurized water reactor, was determined. For the depletion and decay calculations, ORIGEN code was utilized. The results are presented for burnups of 30 to 49 GWd/MTHM and different cooling times up to 100 years. According to these results, total activity of a spent fuel assembly with initial enrichment of 3.92%, burnup of 49 GWd/MTHM, and cooling time of 3 years is 1.92 × 1016 Bq. The results can be utilized specifically in transportation/storage cask design for spent fuel management of Bushehr nuclear power plant.

Analysis of RCS Depressurization Effects on Containment Temperature for Qinshan Phase II Nuclear Power Plant

2014 ◽  
Author(s):  
Liu Lili ◽  
Zhang Ming ◽  
Deng Jian
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Hydrogen Generation ◽  
Hydrogen Combustion ◽  
Severe Accident ◽  
Generation Rate ◽  
Pressurized Water Reactor ◽  
Gas Temperature ◽  
Pressurized Water

A severe accident code was applied for modeling of a typical pressurized water reactor (PWR) nuclear power plant, and the effects of RCS depressurization on the gas temperature of the relief tank cell in the containment during a station blackout (SBO) induced accident was analyzed. The sensitivity calculation indicated that the hydrogen generation rate obviously increased due to RCS depressurization in a critical stage. The results show that RCS depressurization can play an important role in hydrogen generation rate and total accumulation, and the temperature of the containment atmosphere is highly influenced by hydrogen combustion. High temperature induced by hydrogen combustion may degrade the equipment and instruments capabilities. Based on this analysis, a feasible strategy of RCS depressurization for mitigating the accident consequence is provided for developing the capacity of the SBO treatment of Qinshan Phase Nuclear Power Plant (QSP-II NPP).

Influence of Sump on Containment Thermal Hydraulics: Synthesis of the TOSQAN Tests

2015 ◽  
Vol 1 (4) ◽  
Author(s):  
Emmanuel Porcheron ◽  
Pascal Lemaitre ◽  
Amandine Nuboer
Keyword(s):  
Nuclear Power ◽  
Severe Accident ◽  
Water Evaporation ◽  
Plant Water ◽  
Pressurized Water Reactor ◽  
Steam Condensation ◽  
Pressurized Water ◽  
Noncondensable Gases ◽  
Nuclear Core ◽  
Hydraulic Conditions

During the course of a severe accident in a nuclear power plant, water can be collected in the sump containment through steam condensation on walls, cooling circuit leak, and by spray systems activation. Therefore, the sump can become a place of heat and mass exchanges through water evaporation and steam condensation, which influences the distribution of hydrogen released in containment during nuclear core degradation. The objective of this paper is to present the analysis of semi-analytical experiments on sump interaction between containment atmosphere for typical accidental thermal hydraulic conditions in a pressurized water reactor (PWR). Tests are conducted in the TOSQAN facility developed by the Institut de Radioprotection et de Sûreté Nucléaire in Saclay. The TOSQAN facility is particularly well adapted to characterize the distribution of gases in a containment vessel. A tests’ grid was defined to investigate the coupled effect of the sump evaporation with wall condensation, for air steam conditions, with noncondensable gases (He, SF6), and for steady and transient states (two depressurization tests).

Study of Equipment Survivability Under Severe Accident Conditions

2016 ◽  
Author(s):  
Jinquan Yan ◽  
Shanhu Xue ◽  
Lin Tian ◽  
Wei Lu
Keyword(s):  
Nuclear Power ◽  
Severe Accident ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Plant Safety ◽  
New Development ◽  
Nuclear Power Plant Safety ◽  
Accident Conditions ◽  
Accident Sequences

To improve nuclear power plant safety, severe accident prevention and mitigation for both new development and existing plants are generally required by various nuclear safety authorities worldwide. Although great efforts have been made, how to ensure equipment survivability under severe accident conditions is still a concern. This paper depicts an approach to demonstrate the equipment survivability under severe accident conditions by taking passive pressurized water reactor CAP1400 as an instance, including screening of severe accident sequences, determination of bounding environment conditions within containment, equipments identification used for severe accident mitigation and proposed test plan.

Sign in / Sign up

Export Citation Format

Share Document