A Hybrid Self-Stressed Cable-Driven Mechanism

2008 ◽  
Author(s):  
Saeed Behzadipour
Keyword(s):  
Static Loading ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Tensile Force ◽  
Cable System ◽  
End Effector ◽  
Stiffness Analysis ◽  
Cable Length ◽  
Cable Drive ◽  
Forward And Inverse Kinematics

A new hybrid cable-driven manipulator is introduced. The manipulator is composed of a Cartesian mechanism to provide three translational degrees of freedom and a cable system to drive the mechanism. The end-effector is driven by three rotational motors through the cables. The cable drive system in this mechanism is self-stressed meaning that the pre-tension of the cables which keep them taut is provided internally. In other words, no redundant actuator or external force is required to maintain the tensile force in the cables. This simplifies the operation of the mechanism by reducing the number of actuators and also avoids their continuous static loading. It also eliminates the redundant work of the actuators which is usually present in cable-driven mechanisms. Forward and inverse kinematics problems are solved and shown to have explicit solutions. Static and stiffness analysis are also performed. The effects of the cable’s compliance on the stiffness of the mechanism is modeled and presented by a characteristic cable length. The characteristic cable length is calculated and analyzed in representative locations of the workspace.

scholarly journals Finite-Horizon Kinetic Energy Optimization of a Redundant Space Manipulator

2021 ◽  
Vol 11 (5) ◽  
pp. 2346
Author(s):  
Alessandro Tringali ◽  
Silvio Cocuzza
Keyword(s):  
Kinetic Energy ◽  
Real Time ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Computational Time ◽  
Redundant Manipulators ◽  
Space Robotics ◽  
Optimal Method ◽  
End Effector ◽  
Global Optimal

The minimization of energy consumption is of the utmost importance in space robotics. For redundant manipulators tracking a desired end-effector trajectory, most of the proposed solutions are based on locally optimal inverse kinematics methods. On the one hand, these methods are suitable for real-time implementation; nevertheless, on the other hand, they often provide solutions quite far from the globally optimal one and, moreover, are prone to singularities. In this paper, a novel inverse kinematics method for redundant manipulators is presented, which overcomes the above mentioned issues and is suitable for real-time implementation. The proposed method is based on the optimization of the kinetic energy integral on a limited subset of future end-effector path points, making the manipulator joints to move in the direction of minimum kinetic energy. The proposed method is tested by simulation of a three degrees of freedom (DOF) planar manipulator in a number of test cases, and its performance is compared to the classical pseudoinverse solution and to a global optimal method. The proposed method outperforms the pseudoinverse-based one and proves to be able to avoid singularities. Furthermore, it provides a solution very close to the global optimal one with a much lower computational time, which is compatible for real-time implementation.

Kinematics of a Fully-Decoupled Remote Center-of-Motion Parallel Manipulator for Minimally Invasive Surgery

2012 ◽  
Vol 6 (2) ◽  
Author(s):  
Chin-Hsing Kuo ◽  
Jian S. Dai
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Invasive Surgery ◽  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Surgical Instruments ◽  
End Effector ◽  
Minimally Invasive Surgical ◽  
Inverse Kinematics Problem

A crucial design challenge in minimally invasive surgical (MIS) robots is the provision of a fully decoupled four degrees-of-freedom (4-DOF) remote center-of-motion (RCM) for surgical instruments. In this paper, we present a new parallel manipulator that can generate a 4-DOF RCM over its end-effector and these four DOFs are fully decoupled, i.e., each of them can be independently controlled by one corresponding actuated joint. First, we revisit the remote center-of-motion for MIS robots and introduce a projective displacement representation for coping with this special kinematics. Next, we present the proposed new parallel manipulator structure and study its geometry and motion decouplebility. Accordingly, we solve the inverse kinematics problem by taking the advantage of motion decouplebility. Then, via the screw system approach, we carry out the Jacobian analysis for the manipulator, by which the singular configurations are identified. Finally, we analyze the reachable and collision-free workspaces of the proposed manipulator and conclude the feasibility of this manipulator for the application in minimally invasive surgery.

A Model of the Human Spine: Forward and Inverse Kinematics

1992 ◽  
Author(s):  
Sunil Kumar Agrawal ◽  
Siyan Li ◽  
Glen Desmier
Keyword(s):  
Range Of Motion ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Joint Angles ◽  
Human Spine ◽  
Forward And Inverse Kinematics ◽  
Position And Orientation ◽  
Three Degrees Of Freedom ◽  
Adjacent Vertebra

Abstract The human spine is a sophisticated mechanism consisting of 24 vertebrae which are arranged in a series-chain between the pelvis and the skull. By careful articulation of these vertebrae, a human being achieves fine motion of the skull. The spine can be modeled as a series-chain with 24 rigid links, the vertebrae, where each vertebra has three degrees-of-freedom relative to an adjacent vertebra. From the studies in the literature, the vertebral geometry and the range of motion between adjacent vertebrae are well-known. The objectives of this paper are to present a kinematic model of the spine using the available data in the literature and an algorithm to compute the inter vertebral joint angles given the position and orientation of the skull. This algorithm is based on the observation that the backbone can be described analytically by a space curve which is used to find the joint solutions..

Simulation on Trajectory Planning of 6R Manipulator Based on the Shortest Distance Criterion

2014 ◽  
Vol 602-605 ◽  
pp. 942-945
Author(s):  
Qing Qing Huang ◽  
Guang Feng Chen ◽  
Jiang Hua Li ◽  
Xin Wei
Keyword(s):  
Trajectory Planning ◽  
Inverse Kinematics ◽  
Spline Interpolation ◽  
Algebraic Method ◽  
End Effector ◽  
Cartesian Space ◽  
Shortest Distance ◽  
Inverse Solutions ◽  
Group Inverses ◽  
Forward And Inverse Kinematics

This paper concerns the trajectory planning and simulation for 6R Manipulator. First, algebraic method was used to deduce the forward and inverse kinematics of 6R manipulator. All inverse solutions were expressed in atan2 to eliminate redundant roots to get the corresponding inverse formula. For the trajectory planning of manipulator in Cartesian space, using the cubic spline interpolation to get the drive function of joint, getting a unique solution from eight group inverses by the shortest distance criterion, and then obtained the actual end-effector trajectory. Using Matlab to verify the proposed trajectory planning method, validated results show that the proposed algorithm is feasible and effective.

scholarly journals Analytical inverse kinematics for 5-DOF humanoid manipulator under arbitrarily specified unconstrained orientation of end-effector

Robotica ◽  
2014 ◽  
Vol 33 (4) ◽  
pp. 747-767 ◽  
Author(s):  
Masayuki Shimizu
Keyword(s):  
Analytical Method ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Inverse Kinematic ◽  
Inverse Kinematic Problem ◽  
Target Orientation ◽  
End Effector ◽  
Position And Orientation

SUMMARYThis paper proposes an analytical method of solving the inverse kinematic problem for a humanoid manipulator with five degrees-of-freedom (DOF) under the condition that the target orientation of the manipulator's end-effector is not constrained around an axis fixed with respect to the environment. Since the number of the joints is less than six, the inverse kinematic problem cannot be solved for arbitrarily specified position and orientation of the end-effector. To cope with the problem, a generalized unconstrained orientation is introduced in this paper. In addition, this paper conducts the singularity analysis to identify all singular conditions.

scholarly journals Design and Implementation of a Graphic Simulator for Calculating the Inverse Kinematics of a Redundant Planar Manipulator Robot

2020 ◽  
Vol 10 (19) ◽  
pp. 6770
Author(s):  
Claudio Urrea ◽  
Daniel Saa
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Interpolation Method ◽  
Probabilistic Method ◽  
Computational Simulations ◽  
Third Order ◽  
End Effector ◽  
Graphic Interface ◽  
Order Polynomial ◽  
Manipulator Robot

In this paper, a graphics simulator that allows for characterizing the kinematic and dynamic behavior of redundant planar manipulator robots is presented. This graphics simulator is implemented using the Solidworks software and the SimMechanics Toolbox of MATLAB/Simulink. To calculate the inverse kinematics of this type of robot, an algorithm based on the probabilistic method called Simulated Annealing is proposed. By means of this method, it is possible to obtain, among many possibilities, the best solution for inverse kinematics. Without losing generality, the performance of metaheuristic algorithm is tested in a 6-DoF (Degrees of Freedom) virtual robot. The Cartesian coordinates (x,y) of the end effector of the robot under study can be accessed through a graphic interface, thereby automatically calculating its inverse kinematics, and yielding the solution set with the position adopted by each joint for each coordinate entered. Dynamic equations are obtained from the Lagrange–Euler formulation. To generate the joint trajectories, an interpolation method with a third order polynomial is used. The effectiveness of the developed methodologies is verified through computational simulations of a virtual robot.

Kinematics of a New 14 DOF Humanoid Biped Robot

2013 ◽  
Vol 842 ◽  
pp. 564-568
Author(s):  
Lu Min Chen ◽  
Fan Wang
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Biped Robot ◽  
Kinematic Control ◽  
Forward And Inverse Kinematics ◽  
Control Study

This paper proposes a novel architecture for a biped robot with six DOFs per leg and an active toe DOF (Degrees of Freedom). The arrangement of three successive DOFs paralleled to each other makes its inverse kinematics simple and decoupled by omitting one DOF which is unnecessary when walking. And this work presents close equations for the forward and inverse kinematics. The results can be used in the kinematic control study of the robot.

In-hand forward and inverse kinematics with rolling contact

Robotica ◽  
2017 ◽  
Vol 35 (12) ◽  
pp. 2381-2399 ◽  
Author(s):  
Lei Cui ◽  
Jie Sun ◽  
Jian S. Dai
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Rolling Contact ◽  
Moving Frame ◽  
Robot Hand ◽  
Robotic Hands ◽  
Geometric Framework ◽  
Univariate Polynomial ◽  
Forward And Inverse Kinematics ◽  
Exponential Formula

SUMMARYRobotic hands use rolling contact to manipulate a grasped object to a desired location, even when the finger and the palm linkage mechanisms lack degrees of freedom. This paper presents a systematic approach to the forward and inverse kinematics of in-hand manipulation. The moving frame method in differential geometry is integrated into the product of exponential formula to establish a pure geometric framework of the kinematics of a robot hand. The forward and inverse kinematics of a multifingered hand are obtained in terms of the joint rates and contact trajectories. A two-fingered planar robot hand and a three-fingered spatial robot hand are used to demonstrate the proposed approach. The proposed formulation amounts to solving a univariate polynomial, providing an alternative to the existing ones that require numerical integration.

scholarly journals Nonanthropomorphic exoskeleton with legs based on eight-bar linkages

2018 ◽  
Vol 15 (1) ◽  
pp. 172988141875577 ◽  
Author(s):  
Jorge Curiel Godoy ◽  
Ignacio Juárez Campos ◽  
Lucia Márquez Pérez ◽  
Leonardo Romero Muñoz
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Main Function ◽  
Polynomial Functions ◽  
Forward And Inverse Kinematics ◽  
And Performance ◽  
The Stability ◽  
Robotic Leg ◽  
Three Degrees Of Freedom ◽  
Difficulty Walking

This article presents the principles upon which a new nonanthropomorphic biped exoskeleton was designed, whose legs are based on an eight-bar mechanism. The main function of the exoskeleton is to assist people who have difficulty walking. Every leg is based on the planar Peaucellier–Lipkin mechanism, which is a one degree of freedom linkage. To be used as a robotic leg, the Peaucellier–Lipkin mechanism was modified by including two more degrees of freedom, as well as by the addition of a mechanical system based on toothed pulleys and timing belts that provides balance and stability to the user. The use of the Peaucellier–Lipkin mechanism, its transformation from one to three degrees of freedom, and the incorporation of the stability system are the main innovations and contributions of this novel nonanthropomorphic exoskeleton. Its mobility and performance are also presented herein, through forward and inverse kinematics, together with its application in carrying out the translation movement of the robotic foot along paths with the imposition of motion laws based on polynomial functions of time.

Design and Implementation of a Binary Redundant Manipulator With Cascaded Modules1

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Emmanouil Tzorakoleftherakis ◽  
Anastasia Mavrommati ◽  
Anthony Tzes
Keyword(s):  
Computational Complexity ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Redundant Manipulator ◽  
Stable States ◽  
Design And Implementation ◽  
Serial Robot ◽  
The Subject ◽  
Forward And Inverse Kinematics ◽  
Three Degrees Of Freedom

The subject of this paper is the design and implementation of a prototype snakelike redundant manipulator. The manipulator consists of cascaded modules eventually forming a macroscopically serial robot and is powered by shape memory alloy (SMA) wires. The SMAs (NiTi) act as binary actuators with two stable states and as a result, the repeatability of the manipulator's movement is ensured, alleviating the need for complex feedback sensing. Each module is composed of a customized spring and three SMA wires which form a tripod with three degrees of freedom (DOFs). Embedded microcontrollers networked with the I2C protocol activate the actuators of each module individually. In addition, we discuss certain design aspects and propose a solution that deals with the limited absolute stroke achieved by SMA wires. The forward and inverse kinematics of the binary manipulator are also presented and the tradeoff between maneuverability and computational complexity is specifically addressed. Finally, the functionality and maneuverability of this design are verified in simulation and experimentally.

Sign in / Sign up

Export Citation Format

Share Document