scholarly journals Compliant Mechanism Road Bicycle Brake: A Rigid-Body Replacement Case Study

2011 ◽  
Author(s):  
Brian M. Olsen ◽  
Larry L. Howell ◽  
Spencer P. Magleby
Keyword(s):  
Rigid Body ◽  
High Performance ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Element Analysis ◽  
Low Weight ◽  
Rigid Body Model ◽  
Compliant Mechanism Design

This paper demonstrates rigid-body replacement synthesis in the design a mechanism with known design objectives. The design of high-performance bicycle brakes is complicated by a variety of competing design objectives, including increased performance and low weight. But this challenge also provides a good case study to demonstrate the design of compliant mechanisms to replace traditional rigid-link mechanisms. This paper briefly reviews current road brake designs, demonstrates the use of rigid-body replacement synthesis to design a compliant mechanism, and illustrates the combination of compliant mechanism design tools. The resulting concept was generated from the modified dual-pivot brake design and is a partially compliant mechanism where one pin has the dual role of a joint and a mounting pin. The pseudo-rigid-body model, finite element analysis, and optimization algorithms are used to generate design dimensions, and designs are considered for both titanium and E-glass flexures. The resulting design has the potential of reducing the part count and overall weight while maintaining a performance similar to the benchmark.

Synthesis Methods in Compliant Mechanisms: An Overview

2009 ◽  
Author(s):  
Juan A. Gallego ◽  
Just Herder
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Design Methods ◽  
Synthesis Methods ◽  
Starting Point ◽  
Rigid Body Model ◽  
Wide Perspective ◽  
Conceptual Overview ◽  
Compliant Mechanism Design

Compliant mechanisms are rapidly gaining importance, yet their design remains challenging. A great variety of methods are being developed as it is reported in a growing stream of publications. However, so far no review of this body of literature is available. This paper provides a comprehensive and conceptual overview of the main notions behind the most relevant design methods for compliant mechanisms. Rigid-Body-Replacement methods including the Pseudo-Rigid-Body model and the FACT approach are covered, as well as Building Block approaches. In addition an introduction and explanation on Topology Optimization and Shape Optimization is provided, including their most common parameterizations and formulations. This work aims to serve as an introduction into compliant mechanism design methods and as a reference work for more experienced scholars and professionals. It is intended to be a starting point for the exploration of the literature, as well as a guide to specific papers about a particular design problem one may have. For this reason, the paper presents the methods in a wide perspective, emphasizing the conceptual ideas behind every method and refers to literature for details and advanced features.

Pseudo-Rigid-Body Model Chain Algorithm: Part 1 — Introduction and Concept Development

2006 ◽  
Author(s):  
Joby Pauly ◽  
Ashok Midha
Keyword(s):  
Boundary Conditions ◽  
Rigid Body ◽  
Mechanism Design ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Loop Closure ◽  
Body Model ◽  
Rigid Body Model ◽  
Model Chain ◽  
Compliant Mechanism Design

Pseudo-rigid-body models help expedite the compliant mechanism design process by aiding the analysis and synthesis of candidate design solutions, using loop-closure techniques for rigid-body mechanisms. Presently, these models are available only for relatively simple compliant beam geometries and loading situations. The chain algorithm is an alternate method for the design and analysis of compliant mechanisms. Though more versatile, insofar as the geometry and loading are concerned, it is not possible to implement this technique in analysis or synthesis problems involving loop-closure equations. This paper proposes the construction of a generalized “pseudo-rigid-body model chain;” it allows the use of pseudo-rigid-body models in conjunction with the chain algorithm to obtain the deformation kinematics of complex compliant members. Such a “pseudo-rigid-body model chain” would possess dual advantages of expediency of modeling through the use of pseudo-rigid-body representations of compliant segments, and the inherent flexibility of the chain algorithm to geometry and load boundary conditions. The proposed technique involves discretization of the planar continuum into initially straight, equal length compliant segments, whose deflections due to the applied load boundary conditions are then determined using appropriate pseudo-rigid-body models. Such a model could potentially be used in the solution of compliant mechanism design and analysis problems when coupled with the use of loop-closure equations.

A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and Moments

1998 ◽  
Vol 120 (3) ◽  
pp. 392-400 ◽  
Author(s):  
A. Saxena ◽  
S. N. Kramer
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Elliptic Integral ◽  
Beam Equation ◽  
Large Deflections ◽  
Euler Beam ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads. Because of this fact, traditional methods of deflection analysis do not apply. Since the nonlinearities introduced by these large deflections make the system comprising such members difficult to solve, parametric deflection approximations are deemed helpful in the analysis and synthesis of compliant mechanisms. This is accomplished by representing the compliant mechanism as a pseudo-rigid-body model. A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms. In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads. A numerical integration technique using quadrature formulae has been employed to solve the large deflection Bernoulli-Euler beam equation for the tip deflection. Implementation of this scheme is simpler than the elliptic integral formulation and provides very accurate results. An example for the synthesis of a compliant mechanism using the proposed model is also presented.

A Simple and Accurate Method for Determining Large Deflections in Complaint Mechanisms Subjected to End Forces and Moments

1998 ◽  
Author(s):  
A. Saxena ◽  
Steven N. Kramer
Keyword(s):  
Rigid Body ◽  
Numerical Integration ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Beam Equation ◽  
Integration Scheme ◽  
Large Deflections ◽  
Body Model ◽  
Rigid Body Model ◽  
Analysis And Synthesis

Abstract Compliant members in flexible link mechanisms undergo large deflections when subjected to external loads for which, traditional methods of deflection analysis do not apply Nonlinearities introduced by these large deflections make the system comprising such members difficult to solve Parametric deflection approximations are then deemed helpful in the analysis and synthesis of compliant mechanisms This is accomplished by seeking the pseudo-rigid-body model representation of the compliant mechanism A wealth of analysis and synthesis techniques available for rigid-body mechanisms thus become amenable to the design of compliant mechanisms In this paper, a pseudo-rigid-body model is developed and solved for the tip deflection of flexible beams for combined end loads with positive end moments A numerical integration technique using quadrature formulae has been employed to solve the nonlinear Bernoulli-Euler beam equation for the tip deflection Implementation of this scheme is relatively simpler than the elliptic integral formulation and provides nearly accurate results Results of the numerical integration scheme are compared with the beam finite element analysis An example for the synthesis of a compliant mechanism using the proposed model is also presented.

Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms

1994 ◽  
Author(s):  
Larry L. Howell ◽  
Ashok Midha
Keyword(s):  
Rigid Body ◽  
Large Deflection ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Spring Stiffness ◽  
Model Concept ◽  
Analysis And Design ◽  
Body Model ◽  
Rigid Body Model ◽  
Body Joints

Abstract Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. Flexible segments which maintain a constant end angle are discussed, and an example mechanism is analyzed. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.

Compliant Pantographs via the Pseudo-Rigid-Body Model

1998 ◽  
Author(s):  
Andrew J. Nielson ◽  
Larry L. Howell
Keyword(s):  
Rigid Body ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Test Results ◽  
Rigid Link ◽  
Body Model ◽  
Design Flexibility ◽  
Model Predictions ◽  
Rigid Body Model ◽  
Classical Mechanism

Abstract This paper uses a familiar classical mechanism, the pantograph, to demonstrate the utility of the pseudo-rigid-body model in the design of compliant mechanisms to replace rigid-link mechanisms, and to illustrate the advantages and limitations of the resulting compliant mechanisms. To demonstrate the increase in design flexibility, three different compliant mechanism configurations were developed for a single corresponding rigid-link mechanism. The rigid-link pantograph consisted of six links and seven joints, while the corresponding compliant mechanisms had no more than two links and three joints (a reduction of at least four links and four joints). A fourth compliant pantograph, corresponding to a rhomboid pantograph, was also designed and tested. The test results showed that the pseudo-rigid-body model predictions were accurate over a large range, and the mechanisms had displacement characteristics of rigid-link mechanisms in that range. The limitations of the compliant mechanisms included reduced range compared to their rigid-link counterparts. Also, the force-deflection characteristics were predicted by the pseudo-rigid-body model, but they did not resemble those for a rigid-link pantograph because of the energy storage in the flexible segments.

Classification of Compliant Mechanisms and Determination of the Degrees of Freedom Using the Concepts of Compliance Number and Pseudo-Rigid-Body Model

2019 ◽  
Author(s):  
Pratheek Bagivalu Prasanna ◽  
Ashok Midha ◽  
Sushrut G. Bapat
Keyword(s):  
Rigid Body ◽  
Degrees Of Freedom ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Body Model ◽  
Active Compliance ◽  
Kinematic Behavior ◽  
Rigid Body Model

Abstract Understanding the kinematic properties of a compliant mechanism has always proved to be a challenge. A concept of compliance number offered earlier emphasized the development of terminology that aided in its determination. A method to evaluate the elastic degrees of freedom associated with the flexible segments/links of a compliant mechanism using the pseudo-rigid-body model (PRBM) concept is provided. In this process, two distinct classes of compliant mechanisms are developed involving: (i) Active Compliance and (ii) Passive Compliance. Furthermore, these also aid in a better characterization of the kinematic behavior of a compliant mechanism. A more lucid interpretation of the significance of compliance number is provided. Applications of this method to both active and passive compliant mechanisms are exemplified. Finally, an experimental procedure that aids in visualizing the degrees of freedom as calculated is presented.

scholarly journals Design and Validation of a Single-SOI-Wafer 4-DOF Crawling Microgripper

Micromachines ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 376 ◽  
Author(s):  
Matteo Verotti ◽  
Alvise Bagolini ◽  
Pierluigi Bellutti ◽  
Nicola Pio Belfiore
Keyword(s):  
Finite Element Analysis ◽  
Rigid Body ◽  
Compliant Mechanism ◽  
Silicon On Insulator ◽  
Element Analysis ◽  
Deep Reactive Ion Etching ◽  
Theoretical Simulation ◽  
Body Model ◽  
Replacement Method ◽  
Rigid Body Model

This paper deals with the manipulation of micro-objects operated by a new concept multi-hinge multi-DoF (degree of freedom) microsystem. The system is composed of a planar 3-DoF microstage and of a set of one-DoF microgrippers, and it is arranged is such a way as to allow any microgripper to crawl over the stage. As a result, the optimal configuration to grasp the micro-object can be reached. Classical algorithms of kinematic analysis have been used to study the rigid-body model of the mobile platform. Then, the rigid-body replacement method has been implemented to design the corresponding compliant mechanism, whose geometry can be transferred onto the etch mask. Deep-reactive ion etching (DRIE) is suggested to fabricate the whole system. The main contributions of this investigation consist of (i) the achievement of a relative motion between the supporting platform and the microgrippers, and of (ii) the design of a process flow for the simultaneous fabrication of the stage and the microgrippers, starting from a single silicon-on-insulator (SOI) wafer. Functionality is validated via theoretical simulation and finite element analysis, whereas fabrication feasibility is granted by preliminary tests performed on some parts of the microsystem.

Application of Rigid-Body-Linkage Static Balancing Techniques to Reduce Actuation Effort in Compliant Mechanisms

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Sangamesh R. Deepak ◽  
Amrith N. Hansoge ◽  
G. K. Ananthasuresh
Keyword(s):  
Rigid Body ◽  
General Framework ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Small Length ◽  
Element Analysis ◽  
Static Balancing ◽  
Free Length ◽  
First Order ◽  
Taylor’S Series

There are analytical methods in the literature where a zero-free-length spring-loaded linkage is perfectly statically balanced by addition of more zero-free-length springs. This paper provides a general framework to extend these methods to flexure-based compliant mechanisms through (i) the well know small-length flexure model and (ii) approximation between torsional springs and zero-free-length springs. We use first-order truncated Taylor's series for the approximation between the torsional springs and zero-free-length springs so that the entire framework remains analytical, albeit approximate. Three examples are presented and the effectiveness of the framework is studied by means of finite-element analysis and a prototype. As much as 70% reduction in actuation effort is demonstrated. We also present another application of static balancing of a rigid-body linkage by treating a compliant mechanism as the spring load to a rigid-body linkage.

Using Rigid-Body Mechanism Topologies to Design Shape-Changing Compliant Mechanisms

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Kai Zhao ◽  
James P. Schmiedeler
Keyword(s):  
Rigid Body ◽  
Shape Matching ◽  
Compliant Mechanisms ◽  
Compliant Mechanism ◽  
Shape Change ◽  
Mesh Network ◽  
Adaptive Antenna ◽  
Optimal Size ◽  
Dimensional Synthesis ◽  
Element Analysis

This paper uses rigid-body mechanism topologies to synthesize fully distributed compliant mechanisms that approximate a shape change defined by a set of morphing curves in different positions. For a shape-change problem, a rigid-body mechanism solution is generated first to provide the base topology. This base topology defines a preselected design space for the structural optimization in one of two ways so as to obtain a compliant mechanism solution that is typically superior to the local minimum solutions obtained from searching more expansive design spaces. In the first strategy, the dimensional synthesis directly determines the optimal size and shape of the distributed compliant mechanism having exactly the base topology. In the second strategy, an initial mesh network established from the base topology is used to generate different topologies (in addition to the base), and an improved design domain parameterization scheme ensures that only topologies with well-connected structures are evaluated. The deformation of each generated compliant mechanism is evaluated using geometrically nonlinear finite element analysis (FEA). A two-objective genetic algorithm (GA) is employed to find a group of viable designs that trade off minimizing shape matching error with minimizing maximum stress. The procedure's utility is demonstrated with three practical examples—the first two approximating open-curve profiles of an adaptive antenna and the third approximating closed-curve profiles of a morphing wing.

Sign in / Sign up

Export Citation Format

Share Document