Estimating Fatigue Life of Thermowells in Supercritical Operation

2018 ◽  
Author(s):  
Philip Diwakar ◽  
Yuqing Liu ◽  
Matt Jaouhari
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fluid Flow ◽  
Fatigue Life ◽  
Element Analysis ◽  
Flow Through ◽  
Case Basis ◽  
Cycles To Failure

Designing structures resistant to failure due to fluid induced vibration is a challenge. This paper shows a methodology of evaluating the cycles to failure of thermowells placed in a fluid flow through a large pipe in supercritical operation. The ASME PTC guide describes using Finite Element Analysis (FEA) to evaluate these conditions on a case by case basis. One case from several validated cases is presented using measurements available from the field.

scholarly journals Prediction of Thermal Fatigue Life of Lead-Free BGA Solder Joints by Finite Element Analysis

2001 ◽  
Vol 42 (5) ◽  
pp. 809-813 ◽  
Author(s):  
Young-Eui Shin ◽  
Kyung-Woo Lee ◽  
Kyong-Ho Chang ◽  
Seung-Boo Jung ◽  
Jae Pil Jung
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Thermal Fatigue ◽  
Solder Joints ◽  
Lead Free ◽  
Element Analysis ◽  
Thermal Fatigue Life

scholarly journals Fatigue life prediction of upper arm suspension using strain life approach

2019 ◽  
Vol 17 (1) ◽  
pp. 25-40 ◽  
Author(s):  
Hafida Kahoul ◽  
Samira Belhour ◽  
Ahmed Bellaouar ◽  
Jean Paul Dron
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Aluminium Alloys ◽  
Fatigue Analysis ◽  
Vertical Force ◽  
Upper Arm ◽  
Element Analysis ◽  
Content Type ◽  
Critical Location

Purpose This paper aims to present the fatigue life behaviour of upper arm suspension. The main objectives are to predict the fatigue life of the component and to identify the critical location. In this analysis, three aluminium alloys were used for the suspension, and their fatigue life was compared to select the suitable material for the suspension arm. Design/methodology/approach CAD model was prepared using Solid Works software, and finite element analysis was done using ANSYS 14.0 software by importing the Parasolid file to ANSYS. The model is subjected to loading and boundary conditions; the authors consider a vertical force with constant amplitude applied at the bushing that connected to the tire, the others two bushing that connected to the body of the car are constraint. Tetrahedral elements given enhanced results as compared to other types of elements; therefore, the elements (TET 10) are used. The maximum principal stress was considered in the linear static analysis, and fatigue analysis was done using strain life approach. Findings Life and damage are evaluated and the critical location was considered at node 63,754. From the fatigue analysis, aluminium alloys 7175-T73 (Al 90%-Zn 5.6%-Mg 2.5% -… …) and 2014-T6 (Al 93.5%-Cu 4.4%-Mg 0.5%… …) present a similar behaviour as compared to 6061-T6 (Al 97.9%-Mg 1.0%-Si 0.6%… … .); in this case of study, these lather are considered to be the materials of choice to manufacture the suspension arms; but 7175-T73 aluminium alloys remain the material with a better resistance to fatigue. Originality/value By the finite element analysis method and assistance of ANSYS software, it is able to analyse the different car components from varied aspects such as fatigue, and consequently save time and cost. For further research, the experimental works under controlled laboratory conditions should be done to determine the validation of the result from the software analysis.

Finite Element Analysis of the Rolling Contact Fatigue Life of Railcar Wheels

2008 ◽  
Vol 575-578 ◽  
pp. 1461-1466
Author(s):  
Byeong Choon Goo ◽  
Jung Won Seo
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Element Analysis ◽  
Railway Vehicles ◽  
Contact Fatigue Life

Railcar wheels and axles belong to the most critical components in railway vehicles. The service conditions of railway vehicles have been more severe in recent years due to speed-up. Therefore, a more precise evaluation of railcar wheel life and safety has been requested. Wheel/rail contact fatigue and thermal cracks due to braking are two major mechanisms of the railcar wheel failure. One of the main sources influencing on the contact zone failure is residual stress. The residual stress in wheels formed during heat treatment in manufacturing changes in the process of braking. Thus the fatigue life of railcar wheels should be estimated by considering both thermal stress and rolling contact. Also, the effect of residual stress variation due to manufacturing process and braking process should be included in simulating contact fatigue behavior. In this paper, an evaluation procedure for the contact fatigue life of railcar wheels considering the effects of residual stresses due to heat treatment, braking and repeated contact load is proposed. And the cyclic stressstrain history for fatigue analysis is simulated by finite element analysis for the moving contact load.

TTK Chitra tilting disc heart valve model TC2: An assessment of fatigue life and durability

2017 ◽  
Vol 231 (8) ◽  
pp. 758-765 ◽  
Author(s):  
NN Subhash ◽  
Adathala Rajeev ◽  
Sreedharan Sujesh ◽  
CV Muraleedharan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Heart Valve ◽  
Life Prediction ◽  
Heart Valves ◽  
Failure Modes ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Valve Model

Average age group of heart valve replacement in India and most of the Third World countries is below 30 years. Hence, the valve for such patients need to be designed to have a service life of 50 years or more which corresponds to 2000 million cycles of operation. The purpose of this study was to assess the structural performance of the TTK Chitra tilting disc heart valve model TC2 and thereby address its durability. The TC2 model tilting disc heart valves were assessed to evaluate the risks connected with potential structural failure modes. To be more specific, the studies covered the finite element analysis–based fatigue life prediction and accelerated durability testing of the tilting disc heart valves for nine different valve sizes. First, finite element analysis–based fatigue life prediction showed that all nine valve sizes were in the infinite life region. Second, accelerated durability test showed that all nine valve sizes remained functional for 400 million cycles under experimental conditions. The study ensures the continued function of TC2 model tilting disc heart valves over duration in excess of 50 years. The results imply that the TC2 model valve designs are structurally safe, reliable and durable.

Finite Element Analysis Model of Corrosion Fatigue for TIG Welding Workpiece

2016 ◽  
Vol 707 ◽  
pp. 154-158
Author(s):  
Somsak Limwongsakorn ◽  
Wasawat Nakkiew ◽  
Adirek Baisukhan
Keyword(s):  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Corrosion Fatigue ◽  
Welding Process ◽  
Simulation Software ◽  
Tig Welding ◽  
Element Analysis ◽  
Fea Model

The proposed finite element analysis (FEA) model was constructed using FEA simulation software, ANSYS program, for determining effects of corrosion fatigue (CF) from TIG welding process on AISI 304 stainless steel workpiece. The FEA model of TIG welding process was developed from Goldak's double ellipsoid moving heat source. In this paper, the residual stress results obtained from the FEA model were consistent with results from the X-ray diffraction (XRD) method. The residual stress was further used as an input in the next step of corrosion fatigue analysis. The predictive CF life result obtained from the FEA CF model were consistent with the value obtained from stress-life curve (S-N curve) from the reference literaturature. Therefore, the proposed FEA of CF model was then used for predicting the corrosion fatigue life on TIG welding workpiece, the results from the model showed the corrosion fatigue life of 1,794 cycles with testing condition of the frequency ( f ) = 0.1 Hz and the equivalent load of 67.5 kN (equal to 150 MPa) with R = 0.25.

Prediction of thermo-mechanical fatigue life of IN738 LC using the finite element analysis

2014 ◽  
Vol 15 (8) ◽  
pp. 1733-1737 ◽  
Author(s):  
Jeong-Min Lee ◽  
Chang-Sung Seok ◽  
Dongkeun Lee ◽  
Yongseok Kim ◽  
Junghan Yun ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Element Analysis ◽  
Mechanical Fatigue ◽  
The Finite Element Analysis
Sign in / Sign up

Export Citation Format

Share Document