Evaluation of a Statistically Targeted Forcing Method for Synthetic Turbulence Generation in Large-Eddy Simulations and Hybrid RANS-LES Simulations

2020 ◽  
Author(s):  
Olalekan O. Shobayo ◽  
D. Keith Walters
Keyword(s):  
Turbulent Flow ◽  
Momentum Equation ◽  
New Method ◽  
Navier Stokes ◽  
Model Parameters ◽  
Mean Velocity ◽  
Spectra Analysis ◽  
Large Eddy ◽  
Mesh Resolution ◽  
Turbulence Generation

Abstract Computational fluid dynamics (CFD) results are presented for synthetic turbulence generation by a proposed statistically targeted forcing (STF) method. The new method seeks to introduce a fluctuating velocity field with a distribution of first and second moments that match a user-specified target mean velocity and Reynolds stress tensor, by incorporating deterministic time-dependent forcing terms into the momentum equation for the resolved flow. The STF method is formulated to extend the applicability of previously documented methods and provide flexibility in regions where synthetic turbulence needs to be generated or damped, for use in engineering level large-eddy and hybrid large-eddy/Reynolds-averaged Navier-Stokes CFD simulations. The objective of this study is to evaluate the performance of the proposed STF method in LES simulations of isotropic and anisotropic homogeneous turbulent flow test cases. Results are interrogated and compared to target statistical velocity and turbulent stress distributions and evaluated in terms of energy spectra. Analysis of the influence of STF model parameters, mesh resolution, and LES subgrid stress model on the results is investigated. Results show that the new method can successfully reproduce desired statistical distributions in a homogeneous turbulent flow.

Large eddy simulation study of turbulent flow around smooth and rough domes

2013 ◽  
Vol 227 (12) ◽  
pp. 2686-2700 ◽  
Author(s):  
N Kharoua ◽  
L Khezzar
Keyword(s):  
Large Eddy Simulation ◽  
Turbulent Flow ◽  
Flow Behavior ◽  
Pressure Coefficient ◽  
Horseshoe Vortex ◽  
Scale Model ◽  
Stream Velocity ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Large Eddy

Large eddy simulation of turbulent flow around smooth and rough hemispherical domes was conducted. The roughness of the rough dome was generated by a special approach using quadrilateral solid blocks placed alternately on the dome surface. It was shown that this approach is capable of generating the roughness effect with a relative success. The subgrid-scale model based on the transport of the subgrid turbulent kinetic energy was used to account for the small scales effect not resolved by large eddy simulation. The turbulent flow was simulated at a subcritical Reynolds number based on the approach free stream velocity, air properties, and dome diameter of 1.4 × 105. Profiles of mean pressure coefficient, mean velocity, and its root mean square were predicted with good accuracy. The comparison between the two domes showed different flow behavior around them. A flattened horseshoe vortex was observed to develop around the rough dome at larger distance compared with the smooth dome. The separation phenomenon occurs before the apex of the rough dome while for the smooth dome it is shifted forward. The turbulence-affected region in the wake was larger for the rough dome.

Large-Eddy and Unsteady Reynolds-Averaged Navier-Stokes Simulations of an Axial Flow Pump for Cardiac Support

2017 ◽  
Author(s):  
Benjamin Torner ◽  
Sebastian Hallier ◽  
Matthias Witte ◽  
Frank-Hendrik Wurm
Keyword(s):  
Flow Field ◽  
Axial Flow ◽  
Pressure Head ◽  
Damage Parameter ◽  
Ventricular Assist Devices ◽  
Navier Stokes ◽  
Mean Velocity ◽  
Blood Damage ◽  
Large Eddy ◽  
Reynolds Averaged Navier Stokes

The use of implantable pumps for cardiac support (Ventricular Assist Devices) has proven to be a promising option for the treatment of advanced heart failure. Avoiding blood damage and achieving high efficiencies represent two main challenges in the optimization process. To improve VADs, it is important to understand the turbulent flow field in depth in order to minimize losses and blood damage. The application of the Large-eddy simulation (LES) is an appropriate approach to simulate the flow field because turbulent structures and flow patterns, which are connected to losses and blood damage, are directly resolved. The focus of this paper is the comparison between an LES and an Unsteady Reynolds-Averaged Navier-Stokes simulation (URANS) because the latter one is the most frequently used approach for simulating the flow in VADs. Integral quantities like pressure head and efficiency are in a good agreement between both methods. Additionally, the mean velocity fields show similar tendencies. However, LES and URANS show different results for the turbulent kinetic energy. Deviations of several tens of percent can be also observed for a blood damage parameter, which depend on velocity gradients. Possible reasons for the deviations will be investigated in future works.

Disruption of the bottom log layer in large-eddy simulations of full-depth Langmuir circulation

2012 ◽  
Vol 699 ◽  
pp. 79-93 ◽  
Author(s):  
A. E. Tejada-Martínez ◽  
C. E. Grosch ◽  
N. Sinha ◽  
C. Akan ◽  
G. Martinat
Keyword(s):  
Gravity Waves ◽  
Large Eddy Simulations ◽  
Stokes Drift ◽  
Navier Stokes ◽  
Wake Region ◽  
Langmuir Circulation ◽  
Mean Velocity ◽  
Wave Forcing ◽  
Large Eddy ◽  
Shear Current

AbstractWe report on disruption of the log layer in the resolved bottom boundary layer in large-eddy simulations (LES) of full-depth Langmuir circulation (LC) in a wind-driven shear current in neutrally-stratified shallow water. LC consists of parallel counter-rotating vortices that are aligned roughly in the direction of the wind and are generated by the interaction of the wind-driven shear with the Stokes drift velocity induced by surface gravity waves. The disruption is analysed in terms of mean velocity, budgets of turbulent kinetic energy (TKE) and budgets of TKE components. For example, in terms of mean velocity, the mixing due to LC induces a large wake region eroding the classical log-law profile within the range $90\lt { x}_{3}^{+ } \lt 200$. The dependence of this disruption on wind and wave forcing conditions is investigated. Results indicate that the amount of disruption is primarily determined by the wavelength of the surface waves generating LC. These results have important implications for turbulence parameterizations for Reynolds-averaged Navier–Stokes simulations of the coastal ocean.

Direct simulations of low-Reynolds-number turbulent flow in a rotating channel

1993 ◽  
Vol 256 ◽  
pp. 163-197 ◽  
Author(s):  
Reidar Kristoffersen ◽  
Helge I. Andersson
Keyword(s):  
Reynolds Number ◽  
Turbulent Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Complete Suppression ◽  
Reynolds Stresses ◽  
Mean Velocity ◽  
Computational Mesh ◽  
Developed Pressure ◽  
Rotating Channel

Direct numerical simulations of fully developed pressure-driven turbulent flow in a rotating channel have been performed. The unsteady Navier–Stokes equations were written for flow in a constantly rotating frame of reference and solved numerically by means of a finite-difference technique on a 128 × 128 × 128 computational mesh. The Reynolds number, based on the bulk mean velocity Um and the channel half-width h, was about 2900, while the rotation number Ro = 2|Ω|h/Um varied from 0 to 0.5. Without system rotation, results of the simulation were in good agreement with the accurate reference simulation of Kim, Moin & Moser (1987) and available experimental data. The simulated flow fields subject to rotation revealed fascinating effects exerted by the Coriolis force on channel flow turbulence. With weak rotation (Ro = 0.01) the turbulence statistics across the channel varied only slightly compared with the nonrotating case, and opposite effects were observed near the pressure and suction sides of the channel. With increasing rotation the augmentation and damping of the turbulence along the pressure and suction sides, respectively, became more significant, resulting in highly asymmetric profiles of mean velocity and turbulent Reynolds stresses. In accordance with the experimental observations of Johnston, Halleen & Lezius (1972), the mean velocity profile exhibited an appreciable region with slope 2Ω. At Ro = 0.50 the Reynolds stresses vanished in the vicinity of the stabilized side, and the nearly complete suppression of the turbulent agitation was confirmed by marker particle trackings and two-point velocity correlations. Rotational-induced Taylor-Görtler-like counter-rotating streamwise vortices have been identified, and the simulations suggest that the vortices are shifted slightly towards the pressure side with increasing rotation rates, and the number of vortex pairs therefore tend to increase with Ro.

scholarly journals An Intrinsic Formulation of Incompressible Navier-Stokes Turbulent Flow

2019 ◽  
Author(s):  
Bohua Sun
Keyword(s):  
Velocity Field ◽  
Turbulent Flow ◽  
Stress Tensor ◽  
Reynolds Stress ◽  
Velocity Fluctuation ◽  
Navier Stokes ◽  
Natural Consequence ◽  
Mean Velocity ◽  
Turbulence Transition ◽  
The Mean

This paper proposed an explicit and simple representation of velocity fluctuation and the Reynolds stress tensor in terms of the mean velocity field. The proposed turbulence equations are closed. The proposed formulations reveal that the mean vorticity is the key source of producing turbulence. It is found that there are no velocity fluctuation and turbulence if there were no vorticity. As a natural consequence, the laminar- turbulence transition condition was obtained in a rational way.

Flow Regime Characteristics in Porous Media Flows at High Reynolds Numbers

2012 ◽  
Author(s):  
Vishal A. Patil ◽  
James A. Liburdy
Keyword(s):  
Turbulent Flow ◽  
Flow Characteristics ◽  
Reynolds Numbers ◽  
Small Scale ◽  
Mean Velocity ◽  
Time Resolved ◽  
Vortical Structures ◽  
Large Eddy ◽  
High Reynolds ◽  
Media Flows

An experimental study on the turbulent flow characteristics in a randomly packed porous bed is presented and discussed. Time resolved PIV measurements, taken in specific pore spaces are used to evaluate transitional and developed turbulent flow statistics for pore Reynolds numbers from 54 to 3964. Three different regimes of steady laminar, transitional and turbulent flow are presented. Small scale coherent vortical structures are examined, using large eddy scale (LES) decomposition, for pore Reynolds number of greater than 1000. Integral length scales were found to reach asymptotic values of approximately 0.1 times the hydraulic diameter of the bed. The integral Eulerian time scales are found to reach an asymptotic value of approximately 0.3 times the convective time scale in the bed. Mean velocity vector maps show flattening of the velocity distribution due to increased momentum mixing. Turbulent stresses show increasing level of homogeneity at higher pore Reynolds numbers.

Sign in / Sign up

Export Citation Format

Share Document