An Evaluation of the Effect of Ambient Conditions on the Integration of Inlet Conditioning Systems With Industrial Gas Turbine Engines

2003 ◽  
Author(s):  
Janel N. Nixon ◽  
Mark Waters ◽  
Dimitri Mavris
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Gas Turbine ◽  
Robust Design ◽  
Operating Conditions ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Ambient Conditions ◽  
Temperature And Humidity ◽  
Industrial Gas Turbine

All industrial power systems are influenced by ambient parameters, and power plant output fluctuates significantly with changes in ambient conditions such as pressure, temperature, and humidity. The use of an inlet conditioning system is frequently proposed to lower the temperatures at the inlet of an industrial gas turbine engine, particularly in hot and arid regions. To evaluate such a system, a robust design methodology has been developed whereby ambient operating conditions and their impacts can be modeled easily and accurately. Ambient models are developed that are specific to a given locale and consider daily and annual variations in temperature and humidity. A robust design is one that has a high probability of meeting design goals, and at the same time, is insensitive to operational uncertainty. This paper addresses the possibility of enhancing the robustness of gas turbine engines by means of technology additions. The results of this study have been developed in part using the probabilistic analysis techniques developed at the Aerospace System Design Laboratory at Georgia Tech, and they demonstrate how differing ambient conditions can affect the decision to install an inlet conditioning system with the engine [1]. An industrial gas turbine power plant is modeled, and the ambient models are integrated with the engine model and used to predict the overall impact on power plant net revenue over a year-long period of operation. This is done at four specified locales each with widely different ambient characteristics.

Development of a Fuel Air Premixer for Aero-Derivative Dry Low Emissions Combustors

1994 ◽  
Author(s):  
Narendra D. Joshi ◽  
Michael J. Epstein ◽  
Susan Durlak ◽  
Steven Marakovits ◽  
Paul E. Sabla
Keyword(s):  
Gas Turbine ◽  
Operating Conditions ◽  
Experimental Program ◽  
Design Parameters ◽  
Turbine Engines ◽  
Nox Emissions ◽  
Gas Turbine Engines ◽  
Single Digit ◽  
Test Conditions ◽  
Industrial Gas Turbine

An experimental program was conducted to develop premixer concepts for use in GE’s aero-derivative Marine and Industrial gas turbine engines such as the LM 1600, 2500 and 6000. These engines operate typically at pressure ratios up to 30:1. Extensive tests in 1 and 2 cup test combustors were carried out to evaluate the Double Annular Counter-Rotating Swirler (DACRS) premixers at test conditions representative of the above mentioned engines. These tests also help establish combustor design parameters. Single digit NOx emissions were measured at engine operating conditions with the DACRS II and III premixers. Premixer interactions and their effects on Lean Blow Out were also studied.

The Effects of Ambient Conditions on Gas Turbine Emissions—Generalized Correction Factors

1978 ◽  
Vol 100 (4) ◽  
pp. 640-646 ◽  
Author(s):  
P. Donovan ◽  
T. Cackette
Keyword(s):  
Gas Turbine ◽  
Pressure Ratio ◽  
Turbine Engines ◽  
Inlet Temperature ◽  
Gas Turbine Engines ◽  
Correction Factors ◽  
Oxides Of Nitrogen ◽  
Ambient Conditions ◽  
Nitrogen Emission ◽  
Wide Range

A set of factors which reduces the variability due to ambient conditions of the hydrocarbon, carbon monoxide, and oxides of nitrogen emission indices has been developed. These factors can be used to correct an emission index to reference day ambient conditions. The correction factors, which vary with engine rated pressure ratio for NOx and idle pressure ratio for HC and CO, can be applied to a wide range of current technology gas turbine engines. The factors are a function of only the combustor inlet temperature and ambient humidity.

Development of Fault Diagnosis and Failure Prediction Techniques for Small Gas Turbine Engines

2001 ◽  
Author(s):  
Craig R. Davison ◽  
A. M. Birk
Keyword(s):  
Fault Diagnosis ◽  
Gas Turbine ◽  
Operating Time ◽  
Turbine Engines ◽  
Time To Failure ◽  
Gas Turbine Engines ◽  
Ambient Conditions ◽  
Engine Operation ◽  
Maintenance Cycle ◽  
Prediction Techniques

A computer model of a gas turbine auxiliary power unit was produced to develop techniques for fault diagnosis and prediction of remaining life in small gas turbine engines. Due to the relatively low capital cost of small engines it is important that the techniques have both low capital and operating costs. Failing engine components were identified with fault maps, and an algorithm was developed for predicting the time to failure, based on the engine’s past operation. Simulating daily engine operation over a maintenance cycle tested the techniques for identification and prediction. The simulation included daily variations in ambient conditions, operating time, load, engine speed and operating environment, to determine the amount of degradation per day. The algorithm successfully adapted to the daily changes and corrected the operating point back to standard conditions to predict the time to failure.

Design Considerations for Nuclear-Aircraft Gas-Turbine Engines

1959 ◽  
Author(s):  
D. R. Riley
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Radiation Level ◽  
Design Considerations ◽  
Nuclear Heating

Many new design considerations are encountered in the design of nuclear aircraft gas-turbine engines. The effect that the power-plant configurations, the cycle, radiation level, residual radiation, and nuclear heating have on the design is discussed in this paper.

Updating the ANSI Standard on Measurement of Exhaust Emissions

1994 ◽  
Author(s):  
J. M. Vaught
Keyword(s):  
Gas Turbine ◽  
Exhaust Emissions ◽  
Measurement Methods ◽  
National Standards ◽  
Turbine Engines ◽  
Measurement Technology ◽  
Gas Turbine Engines ◽  
Regulatory Requirements ◽  
Industrial Gas Turbine ◽  
Selection Of

The American National Standards Institute (ANSI) required that the source testing Standard on Measurement of Exhaust Emissions from Stationary Gas Turbine Engines, B133.9, be brought up to date with today’s regulatory requirements and best measurement technology. The criteria for the design of the Standard along with its content and format are discussed. The selection of measurement methods for gaseous components, smoke, and particulates emitted by present day emission controlled industrial gas turbine engines is presented.

Advanced Multi-Cup Fuel Injector Technology for Environmentally Responsible Aviation Gas Turbine Engines

2015 ◽  
Author(s):  
Erlendur Steinthorsson ◽  
Adel Mansour ◽  
Brian Hollon ◽  
Michael Teter ◽  
Clarence Chang
Keyword(s):  
Gas Turbine ◽  
Direct Injection ◽  
Pressure Ratio ◽  
Test Facility ◽  
Turbine Engines ◽  
Practical Implementation ◽  
Gas Turbine Engines ◽  
Fuel Injector ◽  
Ambient Conditions ◽  
Environmentally Responsible

Participating in NASA’s Environmentally Responsible Aviation (ERA) Project, Parker Hannifin built and tested multipoint Lean Direct Injection (LDI) fuel injectors designed for NASA’s N+2 55:1 Overall Pressure-Ratio (OPR) gas turbine engine cycles. The injectors are based on Parker’s earlier three-zone injector (3ZI) which was conceived to enable practical implementation of multipoint LDI schemes in conventional aviation gas turbine engines. The new injectors offer significant aerodynamic design flexibility, excellent thermal performance, and scalability to various engine sizes. The injectors built for this project contain 15 injection points and incorporate staging to enable operation at low power conditions. Ignition and flame stability were demonstrated at ambient conditions with ignition air pressure drop as low as 0.3% and fuel-to-air ratio (FAR) as low as 0.011. Lean Blowout (LBO) occurred at FAR as low as 0.005 with air at 460 K and atmospheric pressure. A high pressure combustion testing campaign was conducted in the CE-5 test facility at NASA Glenn Research Center at pressures up to 250 psi and combustor exit temperatures up to 2,033 K (3,200 °F). The tests demonstrated estimated LTO cycle emissions that are about 30% of CAEP/6 for a reference 60,000 lbf thrust, 54.8-OPR engine. This paper presents some details of the injector design along with results from ignition, LBO and emissions testing.

scholarly journals Generalized High Speed Simulation of Gas Turbine Engines

1990 ◽  
Author(s):  
Nanahisa Sugiyama
Keyword(s):  
Real Time ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Speed ◽  
Power Plants ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Jet Engines ◽  
Industrial Gas Turbine ◽  
High Degree

This paper describes a real-time or faster-than-real-time simulation of gas turbine engines, using an ultra high speed, multi-processor digital computer, designated the AD100. It is shown that the frame time is reduced significantly without any loss of fidelity of a simulation. The simulation program is aimed at a high degree of flexibility to allow changes in engine configuration. This makes it possible to simulate various types of gas turbine engines, including jet engines, gas turbines for vehicles and power plants, in real-time. Some simulation results for an intercooled-reheat type industrial gas turbine are shown.

Fuel Flexibility in LM2500 and LM6000 Dry Low Emission Engines

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
John Blouch ◽  
Hejie Li ◽  
Mark Mueller ◽  
Richard Hook
Keyword(s):  
Gas Turbine ◽  
Operating Conditions ◽  
Inert Gases ◽  
Effect Of Temperature ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Kinetics Analysis ◽  
Fuel Flexibility ◽  
Low Emission ◽  
Commercial Operation

The LM2500 and LM6000 dry-low-emissions aeroderivative gas turbine engines have been in commercial service for 15 years and have accumulated nearly 10 × 106 hours of commercial operation. The majority of these engines utilize pipeline quality natural gas predominantly comprised of methane. There is; however, increasing interest in nonstandard fuels that contain varying levels of higher hydrocarbon species and/or inert gases. This paper reports on the demonstrated operability of LM2500 and LM6000 DLE engines with nonstandard fuels. In particular, rig tests at engine conditions were performed to demonstrate the robustness of the dual-annular counter-rotating swirlers premixer design, relative to flameholding with fuels containing high ethane, propane, and N2 concentrations. These experiments, which test the ability of the hardware to shed a flame introduced into the premixing region, have been used to expand the quoting limits for LM2500 and LM6000 gas turbine engines to elevated C2+ levels. In addition, chemical kinetics analysis was performed to understand the effect of temperature, pressure, and fuel compositions on flameholding. Test data for different fuels and operating conditions were successfully correlated with Damkohler number.

Sign in / Sign up

Export Citation Format

Share Document