Gas Turbine Operation Offshore: On-Line Compressor Wash Operational Experience

2014 ◽  
Author(s):  
Stian Madsen ◽  
Lars E. Bakken
Keyword(s):  
Gas Turbine ◽  
Performance Monitoring ◽  
Water Injection ◽  
Peak Load ◽  
Engine Performance ◽  
Operational Experience ◽  
Term Operation ◽  
Turbine Performance ◽  
On Line ◽  
Effective Diagnosis

On-line compressor wash for six GE LM2500PE engines at a Statoil North Sea offshore field is analyzed. Three engines are generator drivers whilst three engines are compressor drivers. Two of the compressor drive engines are running at peak load (T5.4 control), hence production rate is limited by the available power from these engines. All the six engines analyzed run continuously without redundancy, hence gas turbine uptime is critical for the field’s production and economy. The performance and operational experience with online wash at different water-to-air ratios and engine loads, as well as economy potentials related to successful on-line washing are given. This work is based on long-term operation with on-line washing, where operational data is collected and performance analyzed, over a 4–5 year period. All engines are operated with four month intervals between maintenance stops, where off-line crank-wash is performed as well as other necessary maintenance and repairs. On-line wash is performed daily between the maintenance stops at full load (i.e. normal operating load for the subject engine). To keep the engine as clean as possible and reduce degradation between maintenance stops, both an effective on-line water wash system as well as effective air intake filter system, are critical factors. The overall target is to maintain high engine performance, and extend the interval between maintenance stops through effective on-line washing. It is of vital importance to understand the gas turbine performance deterioration. The trending of its deviation from the engine baseline facilitates load-independent monitoring of the gas turbine’s condition. Engine response to water injection at different loads and water-to-air ratios, as well as engine response to compressor deterioration is documented and analyzed. Instrument resolution and repeatability are key factors required in order to obtain reliable performance analysis results. Offshore instrumentation on older installations is often limited to the necessary instruments for machine control/protection, and additional instruments for effective performance monitoring and analysis are often missing or, if installed, have less accuracy. As a result of these analyses, a set of monitoring parameters is proposed for effective diagnosis of compressor degradation. Avenues for further research and development are proposed in order to further increase the understanding of the deterioration mechanisms and of the gas turbine performance and response.

Gas Turbine Fouling Offshore: Effective Online Water Wash Through High Water-to-Air Ratio

2018 ◽  
Author(s):  
Stian Madsen ◽  
Lars E. Bakken
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Peak Load ◽  
Engine Performance ◽  
High Water ◽  
Total Efficiency ◽  
Operational Experience ◽  
Successful Operation ◽  
Term Operation ◽  
The Subject

Optimized operation of gas turbines is discussed for a fleet of eleven GE LM2500PE engines at a Statoil North Sea offshore field in Norway. Three engines are generator drivers and eight engines are compressor drivers. Several of the compressor drive engines are running at peak load (T5.4 control), hence production rate is limited by the available power from these engines. The majority of the engines discussed run continuously without redundancy, hence gas turbine uptime is critical for the field’s production and economy. The performance and operational experience with online water wash at high water-to-air ratio, as well as successful operation at longer maintenance intervals and higher average engine performance are described. This work is based on long-term operation with online washing, where operational data are collected and performance is analyzed over a 10-year period. Today, all engines are operated with 6-month intervals between maintenance stops, where offline crank wash is performed as well as other necessary maintenance and repairs. Online washing is performed daily between the maintenance stops at full load (i.e. normal operating load for the subject engine). To keep the engine as clean as possible and reduce degradation between maintenance stops, both an effective online water wash system and an effective air intake filter system are critical factors. The overall target is to maintain high engine performance, and extend the interval between maintenance stops through effective online washing. Water-to-air ratio is significantly increased compared to the OEM limit (OEM limit is 17 l/min which yields approx. 0.5% water-to-air ratio). Today the engines are operated at a water rate of 50 l/min (3 times the OEM limit) which yields a 1.4% water-to-air ratio. Such a high water-to-air ratio has been proven to be the key parameter for obtaining good online water wash effectiveness. Possible downsides of high water-to-air ratio have been thoroughly studied. The effect of optimized online water wash for the subject engines is longer intervals between maintenance stops, higher power availability, lower engine performance deterioration and reduced emissions (CO2 and NOx). The operating intervals are now extended to six months (4,000 hours), from initially two months (1,500 hours, early 1990s) followed by four months (3,000 hours, mid-2000s). Other installations operated as low as 750 hours between offline washes in the 1980s and 1990s. Of a total efficiency deterioration improvement of 6% over each 6-month operating period, the deterioration is reduced by an estimated 3% related to online water wash.

Gas Turbine Fouling Offshore: Correction Methodology Compressor Efficiency

2017 ◽  
Author(s):  
Stian Madsen ◽  
Lars E. Bakken
Keyword(s):  
Gas Turbine ◽  
Peak Load ◽  
Operational Experience ◽  
Air Filtration ◽  
Ambient Conditions ◽  
Key Factors ◽  
Turbine Performance ◽  
Main Challenge ◽  
Filtration System ◽  
Compressor Efficiency

Gas turbine performance has been analyzed for a fleet of GE LM2500 engines at two Statoil offshore fields in the North Sea. Both generator drive engines and compressor driver engines have been analyzed, covering both the LM2500 base and plus configurations, as well as the SAC and DLE combustor configurations. Several of the compressor drive engines are running at peak load (T5.4 control), and the production rate is thus limited to the available power from these engines. The majority of the engines discussed run continuously without redundancy, implying that gas turbine uptime is critical for the field’s production and economy. Previous studies and operational experience have emphasized that the two key factors to minimize compressor fouling are the optimum designs of the inlet air filtration system and the water wash system. An optimized inlet air filtration system, in combination with daily online water wash (at high water-to-air ratio), are the key factors to achieve successful operation at longer intervals between offline washes and higher average engine performance. Operational experience has documented that the main gas turbine recoverable deterioration is linked to the compressor section. The main performance parameter when monitoring compressor fouling is the gas turbine compressor efficiency. Previous studies have indicated that inlet depression (air mass flow at compressor inlet) is a better parameter when monitoring compressor fouling, whereas instrumentation for inlet depression is very seldom implemented on offshore gas turbine applications. The main challenge when analyzing compressor efficiency (uncorrected) is the large variation in efficiency during the periods between offline washes, mainly due to operation at various engine loads and ambient conditions. Understanding the gas turbine performance deterioration is of vital importance. Trending of the deviation from the engine baseline facilitates load-independent monitoring of the gas turbine’s condition. Instrument resolution and repeatability are key factors for attaining reliable results in the performance analysis. A correction methodology for compressor efficiency has been developed, which improves the long term trend data for effective diagnostics of compressor degradation. Avenues for further research and development are proposed in order to further increase the understanding of the deterioration mechanisms, as well as gas turbine performance and response.

Gas Turbine Fouling Offshore: Effective Online Water Wash Through High Water-to-Air Ratio

2018 ◽  
Vol 141 (4) ◽  
Author(s):  
Stian Madsen ◽  
Lars E. Bakken
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Peak Load ◽  
Engine Performance ◽  
High Water ◽  
Operational Experience ◽  
Successful Operation ◽  
Water Rate ◽  
Offshore Field ◽  
Key Parameter

Optimized operation of gas turbines is discussed for a fleet of 11 GE LM2500PE engines at a Statoil North Sea offshore field in Norway. Three engines are generator drivers, and eight engines are compressor drivers. Several of the compressor drive engines are running at peak load (T5.4 control), hence, the production rate is limited by the available power from these engines. The majority of the engines discussed run continuously without redundancy, hence, the gas turbine uptime is critical for the field's production and economy. The performance and operational experience with online water wash at high water-to-air ratio (w.a.r.), as well as successful operation at longer maintenance intervals and higher average engine performance are described. The water-to-air ratio is significantly increased compared to the original equipment manufacturer (OEM) limit (OEM limit is 17 l/min which yields approximately 0.5% water-to-air ratio). Today the engines are operated at a water rate of 50 l/min (three times the OEM limit) which yields a 1.4% water-to-air ratio. Such a high water-to-air ratio has been proven to be the key parameter for obtaining good online water wash effectiveness. Possible downsides of high water-to-air ratio have been thoroughly studied.

scholarly journals Industrial Gas Turbine Performance: Compressor Fouling and On-Line Washing

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Uyioghosa Igie ◽  
Pericles Pilidis ◽  
Dimitrios Fouflias ◽  
Kenneth Ramsden ◽  
Panagiotis Laskaridis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Operating Conditions ◽  
Compressor Cascade ◽  
Compressor Blades ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
On Line ◽  
The Impact

Industrial gas turbines are susceptible to compressor fouling, which is the deposition and accretion of airborne particles or contaminants on the compressor blades. This paper demonstrates the blade aerodynamic effects of fouling through experimental compressor cascade tests and the accompanied engine performance degradation using turbomatch, an in-house gas turbine performance software. Similarly, on-line compressor washing is implemented taking into account typical operating conditions comparable with industry high pressure washing. The fouling study shows the changes in the individual stage maps of the compressor in this condition, the impact of degradation during part-load, influence of control variables, and the identification of key parameters to ascertain fouling levels. Applying demineralized water for 10 min, with a liquid-to-air ratio of 0.2%, the aerodynamic performance of the blade is shown to improve, however most of the cleaning effect occurred in the first 5 min. The most effectively washed part of the blade was the pressure side, in which most of the particles deposited during the accelerated fouling. The simulation of fouled and washed engine conditions indicates 30% recovery of the lost power due to washing.

Gas Turbine Operation Offshore: On-Line Compressor Wash at Peak Load

2003 ◽  
Author(s):  
Elisabet Syverud ◽  
Lars E. Bakken ◽  
Kyrre Langnes ◽  
Frode Bjo̸rna˚s
Keyword(s):  
Gas Turbine ◽  
Field Test ◽  
Power Output ◽  
Peak Load ◽  
Economic Factors ◽  
Absolute Accuracy ◽  
Key Factors ◽  
Turbine Performance ◽  
Performance Deterioration ◽  
On Line

On-line compressor wash is discussed for a RB211 compressor driver running at peak load at the Statoil Heidrun offshore platform. The oil field’s economy is directly linked to oil production; however, the production rate is limited by driver and gas compressor capacity. From this perspective, the power output and gas turbine uptime become decisive economic factors. The economic potentials related to successful on-line washing are given. This work is based on a series of trials with on-line compressor washing over a two-year period. Results include effect of different on-line washing procedures and washing fluids. The field test campaign has shown no significant improvements with on-line compressor washing at peak load. Understanding the gas turbine performance deterioration is of vital importance. Trending of its deviation from the engine baseline (datum maps) facilitates load-independent monitoring of the gas turbine’s condition. Peak load turbine response to compressor deterioration is analyzed. Instrument resolution and repeatability are key factors that sometimes are more important than absolute accuracy in condition trending. As a result of these analyses, a set of monitoring parameters is suggested for effective diagnostics of compressor degradation in peak load operation. Avenues for further research and development are suggested as our understanding of the deterioration mechanisms at peak load remains incomplete.

Instructing the Principles of Gas Turbine Performance Monitoring and Diagnostics by Means of Interactive Computer Models

2000 ◽  
Author(s):  
K. Mathioudakis ◽  
A. Stamatis ◽  
A. Tsalavoutas ◽  
N. Aretakis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Performance Monitoring ◽  
Measurement Data ◽  
Engine Performance ◽  
Performance Model ◽  
Operating Conditions ◽  
Engine Operation ◽  
Turbine Performance ◽  
Engine Components

The paper discusses how the principles employed for monitoring the performance of gas turbines in industrial duty can be explained by using suitable Gas Turbine performance models. A particular performance model that can be used for educational purposes is presented. The model allows the presentation of basic rules of gas turbine engine behavior and helps understanding different aspects of its operation. It is equipped with a graphics interface, so it can present engine operating point data in a number of different ways: operating line, operating points of the components, variation of particular quantities with operating conditions etc. Its novel feature, compared to existing simulation programs, is that it can be used for studying cases of faulty engine operation. Faults can be implanted into different engine components and their impact on engine performance studied. The notion of fault signatures on measured quantities is clearly demonstrated. On the other hand, the model has a diagnostic capability, allowing the introduction of measurement data from faulty engines and providing a diagnosis, namely a picture of how the performance of engine components has deviated from nominal condition, and how this information gives the possibility for fault identification.

Gas Turbine Operation Offshore: Increased Operating Interval and Higher Engine Performance Through Optimized Intake Air Filter System

2016 ◽  
Author(s):  
Stian Madsen ◽  
Lars E. Bakken
Keyword(s):  
Gas Turbine ◽  
North Sea ◽  
Gas Turbines ◽  
High Efficiency ◽  
Salt Content ◽  
Engine Performance ◽  
Operational Experience ◽  
Air Filter ◽  
Filter System ◽  
Turbine Performance

Optimized operation of gas turbines is discussed for six LM2500PE engines at a Statoil North Sea offshore field. Three engines are generator drivers whilst three engines are compressor drivers. Two of the compressor drive engines are running at peak load (T5.4 control), hence the production rate is limited by the available power from these engines. All of the six engines discussed run continuously without redundancy, gas turbine uptime is therefore critical for the field’s production and economy. The performance and operational experience with upgraded inlet air filter systems and online water wash at high water-to-air ratio, as well as successful operation at longer intervals and higher average engine performance are described. For North Sea operation, a key property of the filter system is the ability to handle high humidity and high salt-content through the harsh environment in these waters. The upgraded filter systems analyzed in this paper is a 2-stage system (vane separator stage upstream of the high-efficiency-filter stage), which is a simplified design versus the old traditional 3-stage systems (louvre upstream and vane separator downstream of the filter stage). These 2-stage systems rely on an efficient upstream vane separator to remove the vast majority of water from the airflow before it reaches the high-efficiency filters. The high-efficiency filters are especially designed to withstand moisture. Deposit analysis from the downstream side of the filters has been performed. Extensive testing of both new and used filter elements, of different filter grade and operated at different intervals, has been performed on a filter test rig facility onshore. All six engines have historically been operated with 4-month intervals between maintenance stops. Online wash is performed daily between the maintenance stops at full load (i.e. normal operating load for the subject engine). As a result of successful development and pilot testing of new filters and optimized filter change intervals, as well as successful online water wash, the engine operating intervals are now extended to 6 months with very low deterioration rate. Understanding the gas turbine performance deterioration is of vital importance. Trending of its deviation from the engine baseline facilitates load-independent monitoring of the gas turbine’s condition. Instrument resolution and repeatability are key factors in order to get reasonable results from the performance analysis. Improvement of the package instrumentation has been implemented on three of the analyzed engines, for better performance monitoring. As a result of these analyses, a set of monitoring parameters is suggested for effective diagnostics of compressor degradation. Avenues for further research and development are proposed in order to further increase the understanding of the deterioration mechanisms and the gas turbine performance and response.

Training Future Gas Turbine Performance Engineers

2007 ◽  
Author(s):  
V. Pachidis ◽  
P. Pilidis ◽  
I. Li
Keyword(s):  
Gas Turbine ◽  
Thermal Power ◽  
Engine Performance ◽  
Gas Turbine Engine ◽  
Performance Simulation ◽  
Turbine Engine ◽  
Turbine Performance ◽  
Auxiliary Power ◽  
Engine Testing ◽  
The Uk

The performance analysis of modern gas turbine engine systems has led industry to the development of sophisticated gas turbine performance simulation tools and the utilization of skilled operators who must possess the ability to balance environmental, performance and economic requirements. Academic institutions, in their training of potential gas turbine performance engineers have to be able to meet these new challenges, at least at a postgraduate level. This paper describes in detail the “Gas Turbine Performance Simulation” module of the “Thermal Power” MSc course at Cranfield University in the UK, and particularly its practical content. This covers a laboratory test of a small Auxiliary Power Unit (APU) gas turbine engine, the simulation of the ‘clean’ engine performance using a sophisticated gas turbine performance simulation tool, as well as the simulation of the degraded performance of the engine. Through this exercise students are expected to gain a basic understanding of compressor and turbine operation, gain experience in gas turbine engine testing and test data collection and assessment, develop a clear, analytical approach to gas turbine performance simulation issues, improve their technical communication skills and finally gain experience in writing a proper technical report.

scholarly journals Turbine Rebuild Effects on Gas Turbine Performance

1992 ◽  
Author(s):  
J. D. MacLeod ◽  
B. Drbanski
Keyword(s):  
Gas Turbine ◽  
National Research Council ◽  
Engine Performance ◽  
Gas Turbine Engine ◽  
Turbine Engine ◽  
New Methods ◽  
Turbine Performance ◽  
Turboprop Engine ◽  
Project Objectives ◽  
Performance Variations

The Engine Laboratory of the National Research Council of Canada (NRCC), with the assistance of Standard Aero Ltd., has established a program for the evaluation of component deterioration on gas turbine engine performance. As part of this project, a study of the effects of turbine rebuild tolerances on overall engine performance was undertaken. This study investigated the range of performance changes that might be expected for simply disassembling and reassembling the turbine module of a gas turbine engine, and how these changes would influence the results of the component fault implantation program. To evaluate the effects of rebuilding the turbine on the performance of a single spool engine, such as Allison T56 turboprop engine, a series of three rebuilds were carried out. This study was performed in a similar way to a previous NRCC study on the effects of compressor rebuilding. While the compressor rebuild study had found performance changes in the order of 1% on various engine parameters, the effects of rebuilding the turbine have proven to be even more significant. Based on the results of the turbine rebuild study, new methods to improve the assurance of the best possible tolerances during the rebuild process are currently being addressed. This paper describes the project objectives, the experimental installation, and the results of the performance evaluations. Discussed are performance variations due to turbine rebuilds on engine performance characteristics. As the performance changes were significant, a rigorous measurement uncertainty analysis is included.

Crude Oil Burning Experience in MS5001P Gas Turbines

1984 ◽  
Vol 106 (4) ◽  
pp. 812-818 ◽  
Author(s):  
W. J. Bunz ◽  
G. N. Ziady ◽  
H. vonE. Doering ◽  
R. J. Radice
Keyword(s):  
Crude Oil ◽  
Gas Turbines ◽  
Peak Load ◽  
Wash Water ◽  
Eastern Province ◽  
Turbine Performance ◽  
Purification System ◽  
On Line ◽  
Cleaning Methods ◽  
The Impact

At Qaisumah, Saudi Arabia, there are four GE MS5001P Gas Turbines operated by the Saudi Consolidated Electric Company in the Eastern Province (SCECO East). The Power Plant is not connected to the main SCECO grid and experiences near-capacity peak load demands in the summer months. Its remoteness and proximity to the Trans-Arabian Pipeline (TAPLINE) dictates the burning of Light Saudi Arabian Crude Oil which is desalted by centrifugal purification without the addition of wash water. Eliminating the need for wash water is important because of the scarcity of water at this site. Power loss is controlled and shutdowns minimized during the critical summer months by removing the ash accumulation on the turbine components by on-line nutshell cleaning. This paper describes the first application of this waterless (dry centrifuge) fuel purification system and the impact of various turbine cleaning methods (particularly on-line nutshelling) on turbine performance, availability, and maintenance.

Sign in / Sign up

Export Citation Format

Share Document