scholarly journals Industrial Gas Turbine Performance: Compressor Fouling and On-Line Washing

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Uyioghosa Igie ◽  
Pericles Pilidis ◽  
Dimitrios Fouflias ◽  
Kenneth Ramsden ◽  
Panagiotis Laskaridis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Operating Conditions ◽  
Compressor Cascade ◽  
Compressor Blades ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
On Line ◽  
The Impact

Industrial gas turbines are susceptible to compressor fouling, which is the deposition and accretion of airborne particles or contaminants on the compressor blades. This paper demonstrates the blade aerodynamic effects of fouling through experimental compressor cascade tests and the accompanied engine performance degradation using turbomatch, an in-house gas turbine performance software. Similarly, on-line compressor washing is implemented taking into account typical operating conditions comparable with industry high pressure washing. The fouling study shows the changes in the individual stage maps of the compressor in this condition, the impact of degradation during part-load, influence of control variables, and the identification of key parameters to ascertain fouling levels. Applying demineralized water for 10 min, with a liquid-to-air ratio of 0.2%, the aerodynamic performance of the blade is shown to improve, however most of the cleaning effect occurred in the first 5 min. The most effectively washed part of the blade was the pressure side, in which most of the particles deposited during the accelerated fouling. The simulation of fouled and washed engine conditions indicates 30% recovery of the lost power due to washing.

GSP, a Generic Object-Oriented Gas Turbine Simulation Environment

2000 ◽  
Author(s):  
Wilfried P. J. Visser ◽  
Michael J. Broomhead
Keyword(s):  
Performance Analysis ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Object Oriented ◽  
Control Logic ◽  
Turbine Engine ◽  
Industrial Gas Turbines ◽  
On Line ◽  
Turboshaft Engine

NLR’s primary tool for gas turbine engine performance analysis is the ‘Gas turbine Simulation Program’ (GSP), a component based modeling environment. GSP’s flexible object-oriented architecture allows steady-state and transient simulation of any gas turbine configuration using a user-friendly drag&drop interface with on-line help running under Windows95/98/NT. GSP has been used for a variety of applications such as various types of off-design performance analysis, emission calculations, control system design and diagnostics of both aircraft and industrial gas turbines. More advanced applications include analysis of recuperated turboshaft engine performance, lift-fan STOVL propulsion systems, control logic validation and analysis of thermal load calculation for hot section life consumption modeling. In this paper the GSP modeling system and object-oriented architecture are described. Examples of applications for both aircraft and industrial gas turbine performance analysis are presented.

Numerical and Experimental Investigation of Secondary Flows and Influence of Air System Design on Heavy-Duty Gas Turbine Performance

2012 ◽  
Author(s):  
Luca Bozzi ◽  
Enrico D’angelo
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Combined Cycle ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Heavy Duty ◽  
Turbine Performance ◽  
Air System ◽  
Secondary Air

High turn-down operating of heavy-duty gas turbines in modern Combined Cycle Plants requires a highly efficient secondary air system to ensure the proper supply of cooling and sealing air. Thus, accurate performance prediction of secondary flows in the complete range of operating conditions is crucial. The paper gives an overview of the secondary air system of Ansaldo F-class AEx4.3A gas turbines. Focus of the work is a procedure to calculate the cooling flows, which allows investigating both the interaction between cooled rows and additional secondary flows (sealing and leakage air) and the influence on gas turbine performance. The procedure is based on a fluid-network solver modelling the engine secondary air system. Parametric curves implemented into the network model give the consumption of cooling air of blades and vanes. Performances of blade cooling systems based on different cooling technology are presented. Variations of secondary air flows in function of load and/or ambient conditions are discussed and justified. The effect of secondary air reduction is investigated in details showing the relationship between the position, along the gas path, of the upgrade and the increasing of engine performance. In particular, a section of the paper describes the application of a consistent and straightforward technique, based on an exergy analysis, to estimate the effect of major modifications to the air system on overall engine performance. A set of models for the different factors of cooling loss is presented and sample calculations are used to illustrate the splitting and magnitude of losses. Field data, referred to AE64.3A gas turbine, are used to calibrate the correlation method and to enhance the structure of the lumped-parameters network models.

Uncertainty Reduction in Gas Turbine Performance Diagnostics by Accounting for Humidity Effects

2001 ◽  
Author(s):  
K. Mathioudakis ◽  
A. Tsalavoutas
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Ambient Conditions ◽  
Ambient Temperatures ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
Industrial Gas Turbine ◽  
The Impact ◽  
Performance Diagnostics ◽  
Health Parameters

The paper presents an analysis of the effect of ambient humidity on the performance of industrial gas turbines and examines the impact of humidity on methods used for engine condition assessment and fault diagnostics. First, the way of incorporating the effect of humidity into a computer model of gas turbine performance is described. The model is then used to derive parameters indicative of the “health” of a gas turbine and thus diagnose the presence of deterioration or faults. The impact of humidity magnitude on the values of these health parameters is studied and the uncertainty introduced, if humidity is not taken into account, is assessed. It is shown that the magnitude of the effect of humidity depends on ambient conditions and is more severe for higher ambient temperatures. Data from an industrial gas turbine are presented to demonstrate these effects and to show that if humidity is appropriately taken into account, the uncertainty in the estimation of health parameters is reduced

Instructing the Principles of Gas Turbine Performance Monitoring and Diagnostics by Means of Interactive Computer Models

2000 ◽  
Author(s):  
K. Mathioudakis ◽  
A. Stamatis ◽  
A. Tsalavoutas ◽  
N. Aretakis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Performance Monitoring ◽  
Measurement Data ◽  
Engine Performance ◽  
Performance Model ◽  
Operating Conditions ◽  
Engine Operation ◽  
Turbine Performance ◽  
Engine Components

The paper discusses how the principles employed for monitoring the performance of gas turbines in industrial duty can be explained by using suitable Gas Turbine performance models. A particular performance model that can be used for educational purposes is presented. The model allows the presentation of basic rules of gas turbine engine behavior and helps understanding different aspects of its operation. It is equipped with a graphics interface, so it can present engine operating point data in a number of different ways: operating line, operating points of the components, variation of particular quantities with operating conditions etc. Its novel feature, compared to existing simulation programs, is that it can be used for studying cases of faulty engine operation. Faults can be implanted into different engine components and their impact on engine performance studied. The notion of fault signatures on measured quantities is clearly demonstrated. On the other hand, the model has a diagnostic capability, allowing the introduction of measurement data from faulty engines and providing a diagnosis, namely a picture of how the performance of engine components has deviated from nominal condition, and how this information gives the possibility for fault identification.

Transient Gas Turbine Performance Diagnostics Through Nonlinear Adaptation of Compressor and Turbine Maps

2015 ◽  
Vol 137 (9) ◽  
Author(s):  
Elias Tsoutsanis ◽  
Nader Meskin ◽  
Mohieddine Benammar ◽  
Khashayar Khorasani
Keyword(s):  
Gas Turbine ◽  
Performance Prediction ◽  
Gas Turbines ◽  
Engine Performance ◽  
Operating Conditions ◽  
Solar Irradiation ◽  
Small Range ◽  
Modeling Methods ◽  
Turbine Performance ◽  
Component Map

Gas turbines are faced with new challenges of increasing flexibility in their operation while reducing their life cycle costs, leading to new research priorities and challenges. One of these challenges involves the establishment of high fidelity, accurate, and computationally efficient engine performance simulation, diagnosis, and prognosis schemes, which will be able to handle and address the gas turbine's ever-growing flexible and dynamic operational characteristics. Predicting accurately the performance of gas turbines depends on detailed understanding of the engine components behavior that is captured by component performance maps. The limited availability of these maps due to their proprietary nature has been commonly managed by adapting default generic maps in order to match the targeted off-design or engine degraded measurements. Although these approaches might be suitable in small range of operating conditions, further investigation is required to assess the capabilities of such methods for use in gas turbine diagnosis under dynamic transient conditions. The diversification of energy portfolio and introduction of distributed generation in electrical energy production have created need for such studies. The reason is not only the fluctuation in energy demand but also more importantly the fact that renewable energy sources, which work with conventional fossil fuel based sources, supply the grid with varying power that depend, for example, on solar irradiation. In this paper, modeling methods for the compressor and turbine maps are presented for improving the accuracy and fidelity of the engine performance prediction and diagnosis. The proposed component map fitting methods simultaneously determine the best set of equations for matching the compressor and the turbine map data. The coefficients that determine the shape of the component map curves have been analyzed and tuned through a nonlinear multi-objective optimization scheme in order to meet the targeted set of engine measurements. The proposed component map modeling methods are developed in the object oriented matlab/simulink environment and integrated with a dynamic gas turbine engine model. The accuracy of the methods is evaluated for predicting multiple component degradations of an engine at transient operating conditions. The proposed adaptive diagnostics method has the capability to generalize current gas turbine performance prediction approaches and to improve performance-based diagnostic techniques.

Uncertainty Reduction in Gas Turbine Performance Diagnostics by Accounting for Humidity Effects

2002 ◽  
Vol 124 (4) ◽  
pp. 801-808 ◽  
Author(s):  
K. Mathioudakis ◽  
T. Tsalavoutas
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Ambient Conditions ◽  
Ambient Temperatures ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
Industrial Gas Turbine ◽  
The Impact ◽  
Performance Diagnostics ◽  
Health Parameters

The paper presents an analysis of the effect of ambient humidity on the performance of industrial gas turbines and examines the impact of humidity on methods used for engine condition assessment and fault diagnostics. First, the way of incorporating the effect of humidity into a computer model of gas turbine performance is described. The model is then used to derive parameters indicative of the “health” of a gas turbine and thus diagnose the presence of deterioration or faults. The impact of humidity magnitude on the values of these health parameters is studied and the uncertainty introduced, if humidity is not taken into account, is assessed. It is shown that the magnitude of the effect of humidity depends on ambient conditions and is more severe for higher ambient temperatures. Data from an industrial gas turbine are presented to demonstrate these effects and to show that if humidity is appropriately taken into account, the uncertainty in the estimation of health parameters is reduced.

Marine Gas Turbine Performance Model for More Electric Ships

2011 ◽  
Author(s):  
George M. Koutsothanasis ◽  
Anestis I. Kalfas ◽  
Georgios Doulgeris
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
Diesel Engines ◽  
Gas Turbines ◽  
Electric Propulsion ◽  
Operating Conditions ◽  
Prime Mover ◽  
Creep Life ◽  
Hull Fouling ◽  
Turbine Performance

This paper presents the benefits of the more electric vessels powered by hybrid engines and investigates the suitability of a particular prime-mover for a specific ship type using a simulation environment which can approach the actual operating conditions. The performance of a mega yacht (70m), powered by two 4.5MW recuperated gas turbines is examined in different voyage scenarios. The analysis is accomplished for a variety of weather and hull fouling conditions using a marine gas turbine performance software which is constituted by six modules based on analytical methods. In the present study, the marine simulation model is used to predict the fuel consumption and emission levels for various conditions of sea state, ambient and sea temperatures and hull fouling profiles. In addition, using the aforementioned parameters, the variation of engine and propeller efficiency can be estimated. Finally, the software is coupled to a creep life prediction tool, able to calculate the consumption of creep life of the high pressure turbine blading for the predefined missions. The results of the performance analysis show that a mega yacht powered by gas turbines can have comparable fuel consumption with the same vessel powered by high speed Diesel engines in the range of 10MW. In such Integrated Full Electric Propulsion (IFEP) environment the gas turbine provides a comprehensive candidate as a prime mover, mainly due to its compactness being highly valued in such application and its eco-friendly operation. The simulation of different voyage cases shows that cleaning the hull of the vessel, the fuel consumption reduces up to 16%. The benefit of the clean hull becomes even greater when adverse weather condition is considered. Additionally, the specific mega yacht when powered by two 4.2MW Diesel engines has a cruising speed of 15 knots with an average fuel consumption of 10.5 [tonne/day]. The same ship powered by two 4.5MW gas turbines has a cruising speed of 22 knots which means that a journey can be completed 31.8% faster, which reduces impressively the total steaming time. However the gas turbine powered yacht consumes 9 [tonne/day] more fuel. Considering the above, Gas Turbine looks to be the only solution which fulfills the next generation sophisticated high powered ship engine requirements.

Uncertainty Analysis of Inflow Conditions on an HPT Gas Turbine Nozzle: Effect on Particle Deposition

2020 ◽  
Author(s):  
R. Friso ◽  
N. Casari ◽  
M. Pinelli ◽  
A. Suman ◽  
F. Montomoli
Keyword(s):  
Gas Turbine ◽  
Energy Efficient ◽  
Gas Turbines ◽  
Particle Deposition ◽  
Operating Conditions ◽  
Wide Range ◽  
And Performance ◽  
Gas Turbine Nozzle ◽  
The Impact ◽  
Inflow Conditions

Abstract Gas turbines (GT) are often forced to operate in harsh environmental conditions. Therefore, the presence of particles in their flow-path is expected. With this regard, deposition is a problem that severely affects gas turbine operation. Components’ lifetime and performance can dramatically vary as a consequence of this phenomenon. Unfortunately, the operating conditions of the machine can vary in a wide range, and they cannot be treated as deterministic. Their stochastic variations greatly affect the forecasting of life and performance of the components. In this work, the main parameters considered affected by the uncertainty are the circumferential hot core location and the turbulence level at the inlet of the domain. A stochastic analysis is used to predict the degradation of a high-pressure-turbine (HPT) nozzle due to particulate ingestion. The GT’s component analyzed as a reference is the HPT nozzle of the Energy-Efficient Engine (E3). The uncertainty quantification technique used is the probabilistic collocation method (PCM). This work shows the impact of the operating conditions uncertainties on the performance and lifetime reduction due to deposition. Sobol indices are used to identify the most important parameter and its contribution to life. The present analysis enables to build confidence intervals on the deposit profile and on the residual creep-life of the vane.

scholarly journals Impact of compressed air energy storage demands on gas turbine performance

2020 ◽  
pp. 095765092090627 ◽  
Author(s):  
Uyioghosa Igie ◽  
Marco Abbondanza ◽  
Artur Szymański ◽  
Theoklis Nikolaidis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Pressure Ratio ◽  
Engine Performance ◽  
Compressed Air ◽  
Design Stage ◽  
Simulation Code ◽  
Ratio Distribution ◽  
Stall Margin ◽  
Industrial Gas Turbines

Industrial gas turbines are now required to operate more flexibly as a result of incentives and priorities given to renewable forms of energy. This study considers the extraction of compressed air from the gas turbine; it is implemented to store heat energy at periods of a surplus power supply and the reinjection at peak demand. Using an in-house engine performance simulation code, extractions and injections are investigated for a range of flows and for varied rear stage bleeding locations. Inter-stage bleeding is seen to unload the stage of extraction towards choke, while loading the subsequent stages, pushing them towards stall. Extracting after the last stage is shown to be appropriate for a wider range of flows: up to 15% of the compressor inlet flow. Injecting in this location at high flows pushes the closest stage towards stall. The same effect is observed in all the stages but to a lesser magnitude. Up to 17.5% injection seems allowable before compressor stalls; however, a more conservative estimate is expected with higher fidelity models. The study also shows an increase in performance with a rise in flow injection. Varying the design stage pressure ratio distribution brought about an improvement in the stall margin utilized, only for high extraction.

An Experimentally Derived Model to Predict the Water Film in a Compressor Cascade With Droplet Laden Flow

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
Niklas Neupert ◽  
Janneck Christoph Harbeck ◽  
Franz Joos
Keyword(s):  
Film Thickness ◽  
Gas Turbines ◽  
Three Dimensional ◽  
Water Film ◽  
Compressor Cascade ◽  
Compressor Blades ◽  
Transonic Compressor ◽  
System A ◽  
Industrial Gas Turbines ◽  
Measured Flow

In recent years, overspray fogging has become a powerful means for power augmentation of industrial gas turbines. Despite the positive thermodynamic effect on the cycle, droplets entering the compressor increase the risk of water droplet erosion and deposition of water on the blades leading to an increase of required torque and profile loss. Due to this, detailed information about the structure and the amount of water on the surface is key for compressor performance. Experiments were conducted with a droplet laden flow in a transonic compressor cascade focusing on the film formed by the deposited water. Two approaches were taken. In the first approach, the film thickness on the blade was directly measured using white light interferometry. Due to significant distortion of the flow caused by the measurement system, a transfer of the measured film thickness to the undisturbed case is not possible. Therefore, a film model is adapted to describe the film flow in terms of height averaged film parameters. In the second approach, experiments were conducted in an undisturbed cascade setup and the water film pattern was measured using a nonintrusive quantitative image processing tool. Utilizing the measured flow pattern in combination with findings from the literature, the rivulet flow structure is resolved. From continuity of the water flow, a film thickness is derived showing good agreement with the previously calculated results. Using both approaches, a three-dimensional (3D) reconstruction of the water film pattern is created giving first experimental results of the film forming on stationary compressor blades under overspray fogging conditions.

Sign in / Sign up

Export Citation Format

Share Document