Short-Term Optimization of a Combined Cycle Power Plant Integrated With an Inlet Air Conditioning Unit

2020 ◽  
Author(s):  
Weimar Mantilla ◽  
José García ◽  
Rafael Guédez ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Combined Cycle ◽  
Plant Performance ◽  
Mixed Integer ◽  
Environmental Load ◽  
Turbine Inlet ◽  
The Impact

Abstract Under new scenarios with high shares of variable renewable electricity, combined cycle gas turbines (CCGT) are required to improve their flexibility, in terms of ramping capabilities and part-load efficiency, to help balance the power system. Simultaneously, liberalization of electricity markets and the complexity of its hourly price dynamics are affecting the CCGT profitability, leading the need for optimizing its operation. Among the different possibilities to enhance the power plant performance, an inlet air conditioning unit (ICU) offers the benefit of power augmentation and “minimum environmental load” (MEL) reduction by controlling the gas turbine inlet temperature using cold thermal energy storage and a heat pump. Consequently, an evaluation of a CCGT integrated with this inlet conditioning unit including a day-ahead optimized operation strategy was developed in this study. To establish the hourly dispatch of the power plant and the operation mode of the inlet conditioning unit to either cool down or heat up the gas turbine inlet air, a mixed-integer linear optimization (MILP) was formulated using MATLAB, aiming to maximize the operational profit of the plant within a 24-hours horizon. To assess the impact of the proposed unit operating under this dispatch strategy, historical data of electricity and natural gas prices, as well as meteorological data and CO2 emission allowances price, have been used to perform annual simulations of a reference power plant located in Turin, Italy. Furthermore, different equipment capacities and parameters have been investigated to identify trends of the power plant performance. Lastly, a sensitivity analysis on market conditions to test the control strategy response was also considered. Results indicate that the inlet conditioning unit, together with the dispatch optimization, increases the power plant’s operational profit by achieving a wider operational range, particularly important during peak and off-peak periods. For the specific case study, it is estimated that the net present value of the CCGT integrated with the ICU is 0.5% higher than the power plant without the unit. In terms of technical performance, results show that the unit reduces the minimum environmental load by approximately 1.34% and can increase the net power output by 0.17% annually.

Short-Term Optimization of a Combined Cycle Power Plant Integrated with an Inlet Air Conditioning Unit

2021 ◽  
Author(s):  
Weimar Mantilla ◽  
Jose Angel Garcia ◽  
Rafael Guédez ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Electricity Markets ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Linear Optimization ◽  
Operation Mode ◽  
Combined Cycle ◽  
Mixed Integer ◽  
Inlet Temperature ◽  
The Impact

Abstract Under new scenarios with high shares of renewable electricity, combined cycle gas turbines (CCGT) are required to improve their flexibility to help balance the power system. Simultaneously, liberalization of electricity markets and the complexity of its hourly price dynamics are affecting the CCGT profitability, leading the need for optimizing its operation. An inlet air conditioning unit (ICU) offers the benefit of power augmentation and "minimum environmental load" (MEL) reduction by controlling the gas turbine inlet temperature using cold thermal energy storage and a heat pump. Consequently, an evaluation of a CCGT integrated with this unit including a day-ahead optimized operation strategy was developed in this study. To establish the hourly dispatch of the power plant and the operation mode of the inlet conditioning unit, a mixed-integer linear optimization (MILP) was formulated, aiming to maximize the operational profit of the plant within a 24-hours horizon. To assess the impact of the unit operating under this dispatch strategy, historical data have been used to perform annual simulations of a reference power plant located in Turin, Italy. Results indicate that the power plant's operational profit increase by achieving a wider operational range during peak and off-peak periods. For the specific case study, it is estimated that the NPV of the CCGT integrated with the ICU is 0.5% higher than the CCGT without it. Results also show that the unitc reduces the MEL by approximately 1.34% and can increase the net power output by 0.17% annually.

Guidance on Conducting Tests of Inlet Chiller Systems Installed in GT Inlets

2005 ◽  
Author(s):  
Terry B. Sullivan ◽  
Michael Giampetro
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Air Conditioning ◽  
Performance Testing ◽  
Project Team ◽  
Plant Performance ◽  
Timely Manner ◽  
Turbine Inlet ◽  
Plant Equipment ◽  
Conditioning Equipment

This paper provides comprehensive methodology on testing inlet chiller systems that are used for Gas Turbine Inlet Air Conditioning. It will serve as a guiding document for the Inlet Chiller Project Team formed by PTC 51, “Combustion Turbine Inlet Air Conditioning Equipment” for use in scripting that code’s section on Inlet Chiller Performance Testing. This paper shows the conceptual similarities that can be drawn between inlet chiller and overall plant performance testing, as well as detailing the pertinent test scopes and boundaries, identifying expected test objectives, and listing the applicable test boundary parameters to be used for correction. Addressing an industry need, this paper also offers guidance on testing these components / systems at conditions different than design. Current equipment code committees, such as ASME PTC 22 on Gas Turbines, and ASME PTC 46 on Overall Plant Performance Testing, have concluded that inlet air conditioning equipment must be out of service while testing the major plant equipment. This would require the inlet chilling system to be tested separately. This requirement dictates that a technically-sound method of inlet chiller testing be codified in a timely manner.

An Expanded Cost of Electricity Model for Highly Flexible Power Plants

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
S. Can Gülen ◽  
Indrajit Mazumder
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Combined Cycle ◽  
Plant Performance ◽  
Cost Of Electricity ◽  
Renewable Power ◽  
Effective Performance ◽  
The Impact

Cost of electricity (COE) is the most widely used metric to quantify the cost-performance trade-off involved in comparative analysis of competing electric power generation technologies. Unfortunately, the currently accepted formulation of COE is only applicable to comparisons of power plant options with the same annual electric generation (kilowatt-hours) and the same technology as defined by reliability, availability, and operability. Such a formulation does not introduce a big error into the COE analysis when the objective is simply to compare two or more base-loaded power plants of the same technology (e.g., natural gas fired gas turbine simple or combined cycle, coal fired conventional boiler steam turbine, etc.) and the same (or nearly the same) capacity. However, comparing even the same technology class power plants, especially highly flexible advanced gas turbine combined cycle units with cyclic duties, comprising a high number of daily starts and stops in addition to emissions-compliant low-load operation to accommodate the intermittent and uncertain load regimes of renewable power generation (mainly wind and solar) requires a significant overhaul of the basic COE formula. This paper develops an expanded COE formulation by incorporating crucial power plant operability and maintainability characteristics such as reliability, unrecoverable degradation, and maintenance factors as well as emissions into the mix. The core impact of duty cycle on the plant performance is handled via effective output and efficiency utilizing basic performance correction curves. The impact of plant start and load ramps on the effective performance parameters is included. Differences in reliability and total annual energy generation are handled via energy and capacity replacement terms. The resulting expanded formula, while rigorous in development and content, is still simple enough for most feasibility study type of applications. Sample calculations clearly reveal that inclusion (or omission) of one or more of these factors in the COE evaluation, however, can dramatically swing the answer from one extreme to the other in some cases.

Development of a Combined Cycle Gas Turbine/Steam Plant for Training Marine and Power Engineers

2007 ◽  
Author(s):  
W. Peter Sarnacki ◽  
Richard Kimball ◽  
Barbara Fleck
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Power Industry ◽  
Combined Cycle ◽  
Plant Performance ◽  
Engineering Programs ◽  
Hands On ◽  
Steam Plant

The integration of micro turbine engines into the engineering programs offered at Maine Maritime Academy (MMA) has created a dynamic, hands-on approach to learning the theoretical and operational characteristics of a turbojet engine. Maine Maritime Academy is a fully accredited college of Engineering, Science and International Business located on the coast of Maine and has over 850 undergraduate students. The majority of the students are enrolled in one of five majors offered at the college in the Engineering Department. MMA already utilizes gas turbines and steam plants as part of the core engineering training with fully operational turbines and steam plant laboratories. As background, this paper will overview the unique hands-on nature of the engineering programs offered at the institution with a focus of implementation of a micro gas turbine trainer into all engineering majors taught at the college. The training demonstrates the effectiveness of a working gas turbine to translate theory into practical applications and real world conditions found in the operation of a combustion turbine. This paper presents the efforts of developing a combined cycle power plant for training engineers in the operation and performance of such a plant. Combined cycle power plants are common in the power industry due to their high thermal efficiencies. As gas turbines/electric power plants become implemented into marine applications, it is expected that combined cycle plants will follow. Maine Maritime Academy has a focus on training engineers for the marine and stationary power industry. The trainer described in this paper is intended to prepare engineers in the design and operation of this type of plant, as well as serve as a research platform for operational and technical study in plant performance. This work describes efforts to combine these laboratory resources into an operating combined cycle plant. Specifically, we present efforts to integrate a commercially available, 65 kW gas turbine generator system with our existing steam plant. The paper reviews the design and analysis of the system to produce a 78 kW power plant that approaches 35% thermal efficiency. The functional operation of the plant as a trainer is presented as the plant is designed to operate with the same basic functionality and control as a larger commercial plant.

A Sequential Approach for Gas Turbine Power Plant Preventive Maintenance Scheduling

2005 ◽  
Author(s):  
Yongjun Zhao ◽  
Vitali Volovoi ◽  
Mark Waters ◽  
Dimitri Mavris
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Preventive Maintenance ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Maintenance Scheduling ◽  
Plant Performance ◽  
Optimization Approach ◽  
Gas Turbine Power Plant

Traditionally the gas turbine power plant preventive maintenances are scheduled with constant maintenance intervals based on recommendations from the equipment suppliers. The preventive maintenances are based on fleet wide experiences, and they are scheduled in a one-size-fit-all fashion. However, in reality, the operating conditions for each gas turbine may vary from site to site, and from unit to unit. Furthermore, the gas turbine is a repairable deteriorating system, and preventive maintenance usually restores only part of its performance. This suggests the gas turbines need more frequent inspection and maintenance as it ages. A unit specific sequential preventive maintenance approach is therefore needed for gas turbine power plants preventive maintenance scheduling. Traditionally the optimization criteria for preventive maintenance scheduling is usually cost based. In the deregulated electric power market, a profit based optimization approach is expected to be more effective than the cost based approach. In such an approach, power plant performance, reliability, and the market dynamics are considered in a joint fashion. In this paper, a novel idea that economics drive maintenance expense and frequency to more frequent repairs and greater expense as the equipment and components age is introduced, and a profit based unit specific sequential preventive maintenance scheduling methodology is developed. To demonstrate the feasibility of the proposed approach, this methodology is implemented using a base load combined cycle power plant with single gas turbine unit.

An Expanded Cost of Electricity Model for Highly Flexible Power Plants

2012 ◽  
Author(s):  
S. Can Gülen ◽  
Indrajit Mazumder
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Combined Cycle ◽  
Plant Performance ◽  
Cost Of Electricity ◽  
Renewable Power ◽  
Effective Performance ◽  
The Impact

Cost of electricity (COE) is the most widely used metric to quantify the cost-performance trade-off involved in comparative analysis of competing electric power generation technologies. Unfortunately, the currently accepted formulation of COE is only applicable to comparisons of power plant options with the same annual electric generation (kilowatt-hours) and same technology as defined by reliability, availability and operability. Such a formulation does not introduce a big error into the COE analysis when the objective is simply to compare two or more baseloaded power plants of the same technology (e.g., natural gas fired gas turbine simple or combined cycle, coal fired conventional boiler steam turbine, etc.) and the same (or nearly the same) capacity. However, comparing even the same technology class power plants, especially highly flexible advanced gas turbine combined cycle units with cyclic duties, comprising a high number of daily starts and stops in addition to emissions-compliant low-load operation to accommodate the intermittent and uncertain load regimes of renewable power generation (mainly wind and solar) requires a significant overhaul of the basic COE formula. This paper develops an expanded COE formulation by incorporating crucial power plant operability and maintainability characteristics such as reliability, unrecoverable degradation, and maintenance factors as well as emissions into the mix. The core impact of duty cycle on the plant performance is handled via effective output and efficiency utilizing basic performance correction curves. The impact of plant start and load ramps on the effective performance parameters is included. Differences in reliability and total annual energy generation are handled via energy and capacity replacement terms. The resulting expanded formula, while rigorous in development and content, is still simple enough for most feasibility study type of applications. Sample calculations clearly reveal that inclusion (or omission) of one or more of these factors in the COE evaluation, however, can dramatically swing the answer from one extreme to the other in some cases.

On-Line Performance Monitoring and Diagnostics for Large Combined Cycle Power Plant

2016 ◽  
Author(s):  
B. Chudnovsky ◽  
L. Levin ◽  
A. Talanker ◽  
V. Mankovsky ◽  
A. Kunin
Keyword(s):  
Power Plant ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Performance Monitoring ◽  
Combined Cycle ◽  
Plant Performance ◽  
Combined Cycle Power Plant ◽  
Large Size ◽  
On Line

Diagnostics of large size combined-cycle power plant components (such as: Gas Turbine, HRSG, Steam Turbine and Condenser) plays a significant role in improving power plant performance, availability, reliability and maintenance scheduling. In order to prevent various faults in cycle operation and as a result a reliability reduction, special monitoring and diagnostic techniques is required, for engineering analysis and utility production management. In this sense an on-line supervision system has developed and implemented for 370 MW combined-cycle. The advanced diagnostic methodology is based on a comparison between actual and target conditions. The actual conditions are calculated using data set acquired continuously from the power plant acquisition system. The target conditions are calculated either as a defined actual best operation (Manufacturer heat balances) or by means of a physical model that reproduces boiler and plant performance at off-design. Both sets of data are then compared to find the reason of performance deviation and then used to monitor plant degradation, to support plant maintenance and to assist on-line troubleshooting. The performance calculation module provides a complete Gas Turbine, HRSG and Steam Turbine island heat balance and operating parameters. This paper describes a study where an on-line performance monitoring tool was employed for continuously evaluating power plant performance. The methodology developed and summarized herein has been successfully applied to large size 360–370 MW combined cycles based on GE and Siemens Gas Turbines, showing good capabilities in estimating the degradation of the main equipment during plant lifetime. Consequently, it is a useful tool for power plant operation and maintenance.

scholarly journals Powering Ahead

2011 ◽  
Vol 133 (05) ◽  
pp. 30-33 ◽  
Author(s):  
Lee S. Langston
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Nuclear Power ◽  
Electrical Power ◽  
The United States ◽  
Combined Cycle ◽  
Electrical Power System ◽  
Efficient Technology ◽  
The Military

This article explores the increasing use of natural gas in different turbine industries and in turn creating an efficient electrical system. All indications are that the aviation market will be good for gas turbine production as airlines and the military replace old equipment and expanding economies such as China and India increase their air travel. Gas turbines now account for some 22% of the electricity produced in the United States and 46% of the electricity generated in the United Kingdom. In spite of this market share, electrical power gas turbines have kept a much lower profile than competing technologies, such as coal-fired thermal plants and nuclear power. Gas turbines are also the primary device behind the modern combined power plant, about the most fuel-efficient technology we have. Mitsubishi Heavy Industries is developing a new J series gas turbine for the combined cycle power plant market that could achieve thermal efficiencies of 61%. The researchers believe that if wind turbines and gas turbines team up, they can create a cleaner, more efficient electrical power system.

Combined Cycle Powerplant Cost Sensitivity Analysis

2021 ◽  
Author(s):  
Pugalenthi Nanadagopal ◽  
Animesh Pandey ◽  
Manjunath More ◽  
Pertik Kamboj
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Maintenance Cost ◽  
Combine Cycle Power Plant ◽  
Manufacturing Companies ◽  
Levelized Cost Of Electricity ◽  
Combine Cycle ◽  
Electrical Generation ◽  
The Impact

Abstract In Gas turbine-based combined cycle power plant market, the customer conducts an economic evaluation of competitive products to decide their buying option. There are different methods to calculate the economics of a power plant like Levelized cost of electricity (LCOE), Net present value (NPV) and payback period. LCOE methodology is commonly used for lifecycle cost analyses for combine cycle power plant that covers cost details of the plant and plant performance over the complete lifetime of a power plant from construction to retiring. Typically, it includes a combine cycle power plant ownership costs (Total plant cost and operating & maintenance cost) and combine cycle power output and efficiency. This LCOE method is helpful to compare power generation system that use similar technologies. This paper encompasses the LCOE calculation method, assumptions & approach to analyze the impact of key parameters of the electrical generation cost. They key parameters includes combine cycle output, combine cycle efficiency, fuel cost, annual operating hours, capital charge factor, annual operating hours, power plant life, discount rate, nominal escalation rate, operating & maintenance cost. This paper analyses result will provide insights to the customer & Gas turbine-based OEM (Own Equipment Manufacturing) companies to focus on different area/parameters to reduce the unit cost of generating electricity.

Performance Analysis of a Combined Cycle Power Plant Through Exergetic and Environmental Indices

2017 ◽  
Author(s):  
Edgar Vicente Torres González ◽  
Raúl Lugo Leyte ◽  
Martín Salazar Pereyra ◽  
Helen Denise Lugo Méndez ◽  
Miguel Toledo Velázquez ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Environmental Indices ◽  
Combined Cycle Power Plant ◽  
Combustion Gases ◽  
Combined Cycle Plant ◽  
Exergetic Analysis ◽  
Gas Turbine Power Plant

In this paper is carried out a comparison between a gas turbine power plant and a combined cycle power plant through exergetic and environmental indices in order to determine performance and sustainability aspects of a gas turbine and combined cycle plant. First of all, an exergetic analysis of the gas turbine and the combined is carried out then the exergetic and environmental indices are calculated for the gas turbine (case A) and the combined cycle (case B). The exergetic indices are exergetic efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy ratio, environmental effect factor and exergetic sustainability. Besides, the environmental indices are global warming, smog formation and acid rain indices. In the case A, the two gas turbines generate 278.4 MW; whereas 415.19 MW of electricity power is generated by the combined cycle (case B). The results show that exergetic sustainability index for cases A and B are 0.02888 and 0.1058 respectively. The steam turbine cycle improves the overall efficiency, as well as, the reviewed exergetic indexes. Besides, the environmental indices of the gas turbines (case A) are lower than the combined cycle environmental indices (case B), since the combustion gases are only generated in the combustion chamber.

Sign in / Sign up

Export Citation Format

Share Document