Experimental Investigation on Performance of Pulsating Heat Pipe

2015 ◽  
Author(s):  
Tarigonda Hari Prasad ◽  
Pol Reddy Kukutla ◽  
P. Mallikarjuna Rao ◽  
R. Meenakshi Reddy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Heat Pipes ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
The Given ◽  
Liquid Vapor

Pulsating heat pipes (PHP) receives heat from the working fluid distributes itself naturally in the form of liquid–vapor system, i.e., receiving heat from one end and transferring it to other end by a pulsating action of the liquid–vapor system. Pulsating heat pipes have more advantages than other heat pipes. The problem identified is, to calculate the performance of the pulsating heat pipes with respect to different inclinations using various parameters. In this paper, experiment on performance of closed single loop pulsating heat pipe (CLPHP) using water as a working fluid is considered. The parameters such as thermal resistance (Rth), heat transfer coefficient (h), and variation of temperature with respect to time for the given input at different inclinations such as 0°, 45°, and 90° are taken for the present work. Water is used as the working fluid and is subjected to 50% filling ratio and vacuumed at a pressure of 2300Pa. The performance is calculated at different inclinations of the CLPHP with single turn/loop. The factors such as heat transfer coefficient, thermal resistance, time taken for heating the pulsating heat pipe with the given input are calculated. Finally, it has been concluded that is preferable orientation for PHP and it was found be at vertical orientation i.e., at 90° inclination, because more pulsating action is taken place at this inclination and henceforth, heat transfer rate is faster at this inclination.

Experimental Investigation and Performance Evaluation of a Multi Turn Closed Loop Pulsating Heat Pipe

2014 ◽  
Vol 592-594 ◽  
pp. 1554-1558 ◽  
Author(s):  
N. Narendra Babu ◽  
Rudra Naik
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Closed Loop ◽  
Experimental Result ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Working Fluids

Pulsating heat pipe (PHP) is a passive heat transfer device, which transfers heat from one region to another with exceptional heat transfer capacity. It utilizes the latent heat of vaporization of the working fluid as well as the sensible heat. As a result, the effective thermal conductivity is higher than that of the conductors. An experimental study on three turn closed loop pulsating heat pipe with three different working fluids viz., Acetone, Methanol, Heptane and distilled water were employed. The PHP is made up of brass material with an inner diameter of 1.95mm, with a total length of 1150 mm for different fill ratios (FR) was employed .The PHP is tested for the thermal resistance and the heat transfer coefficient. The experimental result strongly demonstrates that acetone is a better working fluid among the working fluids considered in terms of higher heat transfer coefficient and lower thermal resistance.

Thermal Characteristics of a Cylindrical Heat Pipe using Multi-Layer Screen Mesh Wick

2018 ◽  
Vol 10 (5) ◽  
Author(s):  
R. Sankar Rao ◽  
S. Bhanu Prakash
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Thermal Characteristics ◽  
Wire Mesh ◽  
Working Fluid ◽  
Wick Structure ◽  
Screen Mesh

Heat pipe is the most widely used heat exchanging device in removal of heat from any given system at a faster rate. The thermal characteristics of heat pipe with single and multi-layered screen mesh wicks have been observed with two working fluids water and acetone. Heat pipe of length 250 mm and 12.7 mm outer diameter, made of copper material is used in all the trials of with and without wick structure. A 100 mesh stainless steel screen wire mesh is chosen as wick structure. Experiments were conducted at different heat loads and various inclinations with 100% fill ratio in evaporator. The performance is measured based on total thermal resistance and overall heat transfer coefficient. The heat pipe is found effective at 60o inclination with acetone as a working fluid and with four layered screen mesh wick. Uncertainty in thermal resistance and heat transfer coefficient is calculated for a heat input of 10W at 0 and 60 inclinations.

scholarly journals PERFORMANCE OF HEAT PIPE FOR DIFFERENT WORKING FLUIDS AND FILL RATIOS

2011 ◽  
Vol 41 (2) ◽  
pp. 96-102 ◽  
Author(s):  
A. K. Mozumder ◽  
A. F. Akon ◽  
M. S. H. Chowdhury ◽  
S. C. Banik
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Thermal Capacity ◽  
Working Fluid ◽  
Working Fluids ◽  
Overall Heat Transfer Coefficient ◽  
Lower Temperature

An attempt is made to design, fabricate and test a miniature heat pipe with 5 mm diameter and 150 mm length with a thermal capacity of 10 W. Experiments were conducted with and without working fluid for different thermal loads to assess the performance of heat pipe. The working fluids chosen for the study were same as those commonly used namely, water, methanol and acetone. The temperature distribution across the heat pipe was measured and recorded using thermocouples. The performance of the heat pipe was quantified in terms of thermal resistance and overall heat transfer coefficient. The amount of liquid filled was varied and the variation of the performance parameters for varying liquid inventory is observed. Finally, optimum liquid fill ratio is identified in terms of lower temperature difference and thermal resistance and higher heat transfer coefficient. The data reported in this study will serve as a good database for the researchers in this field. Overall heat transfer coefficient of the Miniature heat pipe is found to be the maximum for the Acetone as working fluid.DOI: http://dx.doi.org/10.3329/jme.v41i2.7473

Experimental and theoretical investigation of heat transfer characteristics of cylindrical heat pipe using Al2O3–SiO2/W-EG hybrid nanofluids by RSM modeling approach

2021 ◽  
Vol 68 (1) ◽  
Author(s):  
R. Vidhya ◽  
T. Balakrishnan ◽  
B. Suresh Kumar
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Diffraction Spectrum ◽  
Step Method ◽  
Ceramic Nanoparticles ◽  
Transfer Mechanisms

AbstractNanofluids are emerging two-phase thermal fluids that play a vital part in heat exchangers owing to its heat transfer features. Ceramic nanoparticles aluminium oxide (Al2O3) and silicon dioxide (SiO2) were produced by the sol-gel technique. Characterizations have been done through powder X-ray diffraction spectrum and scanning electron microscopy analysis. Subsequently, few volume concentrations (0.0125–0.1%) of hybrid Al2O3–SiO2 nanofluids were formulated via dispersing both ceramic nanoparticles considered at 50:50 ratio into base fluid combination of 60% distilled water (W) with 40% ethylene glycol (EG) using an ultrasonic-assisted two-step method. Thermal resistance besides heat transfer coefficient have been examined with cylindrical mesh heat pipe reveals that the rise of power input decreases the thermal resistance and inversely increases heat transfer coefficient about 5.54% and 43.16% respectively. Response surface methodology (RSM) has been employed for the investigation of heat pipe experimental data. The significant factors on the various convective heat transfer mechanisms have been identified using the analysis of variance (ANOVA) tool. Finally, the empirical models were developed to forecast the heat transfer mechanisms by regression analysis and validated with experimental data which exposed the models have the best agreement with experimental results.

Effects of Surface Coating of Nanoparticles on Thermal Performance of Open Loop Pulsating Heat Pipes

2012 ◽  
Author(s):  
Mehdi Taslimifar ◽  
Maziar Mohammadi ◽  
Ali Adibnia ◽  
Hossein Afshin ◽  
Mohammad Hassan Saidi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Surface Coating ◽  
Heat Pipes ◽  
Open Loop ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Performance Of Heat Transfer

Homogenous dispersing of nanoparticles in a base fluid is an excellent way to increase the thermal performance of heat transfer devices especially Heat Pipes (HPs). As a wickless, cheap and efficient heat pipe, Pulsating Heat Pipes (PHPs) are important candidates for thermal application considerations. In the present research an Open Loop Pulsating Heat Pipe (OLPHP) is fabricated and tested experimentally. The effects of working fluid namely, water, Silica Coated ferrofluid (SC ferrofluid), and ferrofluid without surface coating of nanoparticles (ferrofluid), charging ratio, heat input, and application of magnetic field on the overall thermal performance of the OLPHPs are investigated. Experimental results show that ferrofluid has better heat transport capability relative to SC ferrofluid. Furthermore, application of magnetic field improves the heat transfer performance of OLPHPs charged with both ferrofluids.

Experimental Investigation of Heat Transfer of Refrigerant Fluid Pulsating Heat Pipe

2017 ◽  
Vol 865 ◽  
pp. 137-142
Author(s):  
Somchai Maneewan ◽  
Chantana Punlek ◽  
Hoy Yen Chan ◽  
Atthakorn Thongtha
Keyword(s):  
Heat Transfer ◽  
Thermal Resistance ◽  
Heat Pipe ◽  
Temperature Difference ◽  
Heat Input ◽  
Filling Ratio ◽  
Working Fluid ◽  
Pulsating Heat Pipe ◽  
Filling Volume ◽  
Volume Filling

Heat transfer performances of a pulsating heat pipe (PHP) having internal and external diameter with 4.5 mm and 6 mm with various contents of refrigerant are experimentally investigated. The working fluid as R404A refrigerant was filled in the volume ratios from 0% to 80% and the heat input was controlled in the range from 10 W to 80 W. Obtained results exhibited the ability of R404A refrigerant can enhance the thermal performance in steady state condition. The average temperature difference of the evaporating section and condensing section in the 80% filling volume ratio decreased from 9.5 °C to 2.5 °C when the heating power increase from 10 W to 80 W. The thermal resistance of evaporator and condenser decreased with an increase of the heat input as well. For other filling volume ratios, the trend of temperature difference and thermal resistance was similar to that of the 80% volume filling ratio. Considering the same heat input, the highest heat transfer performance was found at the 80% volume filling ratio. Refrigerant with a relatively low dynamic consistency can lead to relatively high velocity in the PHP that can reduce the temperature difference between the evaporating section and condensing section.

scholarly journals Thermal performance prediction of heat pipe with TiO2 nanofluids using RSM

2021 ◽  
pp. 199-199
Author(s):  
Lakshmi Reddy ◽  
Srinivasa Bayyapureddy Reddy ◽  
Kakumani Govindarajulu
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Tilt Angle ◽  
Heat Load ◽  
Maximum Heat ◽  
Maximum Heat Transfer

Heat pipe is a two phase heat transfer device with high effective thermal conductivity and transfer huge amount of heat with minimum temperature gradient in between evaporator and condenser section. This paper objective is to predict the thermal performance in terms of thermal resistance (R) and heat transfer coefficient (h) of screen mesh wick heat pipe with DI water-TiO2 as working fluid. The input process parameters of heat pipe such as heat load (Q), tilt angle (?) and concentration of nanofluid (?) were modeled and optimized by utilizing Response Surface Methodology (RSM) with MiniTab-17 software to attain minimum thermal resistance and maximum heat transfer coefficient. The minimum thermal resistance of 0.1764 0C/W and maximum heat transfer coefficient of 1411.52 W/m2 0C was obtained under the optimized conditions of 200 W heat load, 57.20 tilt angle and 0.159 vol. % concentration of nano-fluid.

Steady State Parametric Modeling of Non-Conventional Loop Heat Pipes

2013 ◽  
Author(s):  
Karthik S. Remella ◽  
Frank M. Gerner ◽  
Ahmed Shuja
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Steady State ◽  
Transfer Coefficient ◽  
Thermal Energy ◽  
Heat Pipes ◽  
Parametric Model ◽  
Parametric Modeling ◽  
Working Fluid ◽  
Loop Heat Pipes

Loop Heat Pipes (LHPs) are used in many thermal management applications, especially for micro-electronics cooling, because of their ability to passively transport thermal energy from a source to a sink. This paper describes the development of a parametric model for a non-conventional LHP operating in steady state, employed to cool Light Emitting Diodes (LEDs). This device is comprised of a flat evaporator, and a finned circular loop wherein condensation and sub-cooling of the working fluid takes place. Unlike a conventional LHP, this device has no compensation chamber. In the mesh screen of the evaporator, the vapor flow entrains liquid and hence the quality of the two-phase mixture leaving the evaporator (xevap) is less than unity (unlike in a conventional LHP where saturated vapor leaves the evaporator). Since this lower quality (approximately 0.2) results in a smaller ratio of latent energy to sensible energy being removed by the condenser and sub-cooler respectively; the ratio of the length of the sub-cooler to condenser length is significantly larger. This results in more stable and controlled operation of the device. Mathematical models of the evaporator, the condenser and the sub-cooler sections are developed, and two closure conditions are employed in this model. For consistency and accuracy, some parameters in the model, such as the natural convection heat transfer coefficient (h o) and a few thermal resistances in the evaporator, are estimated empirically from test data on the device. The empirically obtained value of the heat transfer coefficient is in very good agreement with correlations from the literature. The parametric model accurately predicts the LED board temperature and other temperatures for a specific amount of thermal energy dissipated by the LEDs.

Experimental Investigation on the Performance of Naphthalene Heat Pipe in Half-Circumferential Heating Method

2010 ◽  
Author(s):  
Yun Liu ◽  
Hong Zhang ◽  
Dongdong Zhan ◽  
Caixia Yin
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Carbon Steel ◽  
Thermal Resistance ◽  
Transfer Coefficient ◽  
Heat Pipe ◽  
Filling Ratio ◽  
Circumferential Direction ◽  
Temperature Uniformity ◽  
Heating Method

Based on the characteristics of a carbon steel-naphthalene heat pipe, a new type of medium temperature heat pipe solar receiver has been developed. According to Direct Steam Generation (DSG) with solar parabolic trough concentrators, a simulation experiment is founded which used a new half-circumferential heating method. At the working dip angles 4° and 8°, the working temperature of heat pipe is stabilized at 250°C, 300°C, 350°C, 380°C, respectively. In this article, the temperature uniformity in circumferential direction, thermal resistance and heat transfer coefficient of the carbon steel-naphthalene has been analyzed and studied. The results indicate: the temperature uniformity in circumferential direction is below 20°C. The optimum filling ratio is 30% and when used this filling ratio, the total thermal resistance basically maintained below 0.23°C/W. Heat transfer coefficient increased with the increase of the transfer power. This article serves as a reference to understanding the heat transfer performance of the carbon steel-naphthalene heat pipe in medium soar receiver.

Sign in / Sign up

Export Citation Format

Share Document