Heat Transfer Enhancement by Irregular Acoustic Streaming in a Shallow Enclosure

2009 ◽  
Author(s):  
Murat K. Aktas ◽  
Turkuler Ozgumus
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Acoustic Streaming ◽  
Fluid Motion ◽  
Bottom Wall ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Left Wall ◽  
Time Marching ◽  
Transverse Temperature

The effects of classical and irregular acoustic streaming structures on convective heat transport in air-filled two dimensional rectangular enclosures are investigated numerically. The oscillatory fluid motion and the resulting streaming motion are driven by cyclic vibration of the enclosure left wall. The fully compressible form of the Navier – Stokes equations are employed to model the transport phenomenon in the enclosure. An explicit time-marching Flux-Corrected Transport (FCT) Algorithm is used to simulate the oscillatory flow field, streaming patterns and associated thermal convection in the enclosure. The vertical walls of enclosure are thermally insulated. The bottom wall is heated isothermally while the top wall is kept at the initial temperature. The transverse temperature gradients strongly affect the acoustic streaming velocities and structures. The irregular streaming significantly augments the heat transfer from the enclosure bottom wall.

Micro Cooling Based on Acoustic Streaming

2008 ◽  
Author(s):  
Hongming Sun ◽  
Hang Guo
Keyword(s):  
Heat Transfer ◽  
Analytical Study ◽  
Stokes Equations ◽  
Acoustic Radiation ◽  
Acoustic Streaming ◽  
Fluid Motion ◽  
Radiation Force ◽  
Cooling Effect ◽  
Navier Stokes ◽  
Navier Stokes Equations

Heat transfer due to forced convection caused by acoustic streaming in microfluidic devices is shown to have potential in cooling effect. However, few studies are made for theoretically studying the fluid motion induced by the acoustic field and forced heat transfer for micro cooling in microdevices. In this paper, Navier-Stokes equations are first employed to study acoustic radiation force and acoustic streaming in microchannel actuated by ultrasonic vibration. Then, an analytical study of fluid motion acoustically induced and the temperature field in microchannel is investigated to determine the enhancement of cooling effect in microchannel with acoustic streaming.

Oscillatory Flow Induced Developing Convection in a Shallow Enclosure: Effect of Sinusoidal Bottom Wall Temperature

2020 ◽  
Vol 142 (3) ◽  
Author(s):  
Saeid R. Angeneh ◽  
Murat K. Aktas
Keyword(s):  
Heat Transfer ◽  
Oscillatory Flow ◽  
Stokes Equations ◽  
Control Volume ◽  
Acoustic Streaming ◽  
Fluid Motion ◽  
Side Wall ◽  
Convective Transport ◽  
Bottom Wall ◽  
Mean Flow

Abstract The influence of hydrodynamically developing nonzero mean acoustic streaming motion on transient convective heat transfer in an air-filled rectangular enclosure is studied numerically. The enclosure is two-dimensional with sinusoidal bottom wall spatial temperature distribution. The oscillatory flow under relatively large Womersley number regime conditions is actuated by the periodic vibrations of the enclosure side wall. The side walls of the enclosure are adiabatic, while the top wall is isothermal. The compressible form of the Navier–Stokes equations is considered to predict the oscillatory- and time-averaged mean flow fields. A control-volume method based explicit computational scheme is used to simulate the convective transport in the enclosure. The longitudinal and the transverse temperature gradients strongly affect the flow structure in the enclosure. The mean fluid motion alters the heat transfer behavior compared to the pure conduction.

A numerical investigation of the effects of a transverse temperature gradient on the formation of regular and irregular acoustic streaming in an enclosure

2010 ◽  
Vol 225 (1) ◽  
pp. 132-144 ◽  
Author(s):  
M K Aktas ◽  
T Ozgumus
Keyword(s):  
Temperature Gradient ◽  
Stokes Equations ◽  
Acoustic Streaming ◽  
Fluid Motion ◽  
Sound Field ◽  
Flow Patterns ◽  
Temperature Gradients ◽  
Left Wall ◽  
Steady Streaming ◽  
Transverse Temperature

The effects of a transverse temperature gradient on the formation of regular and irregular acoustic streaming structures in air-filled, two-dimensional, rectangular, shallow enclosures carrying a longitudinal sound field are investigated numerically. The fluid motion is induced by the harmonic vibration of the enclosure left wall. The fully compressible form of the Navier—Stokes equations is considered to predict the primary oscillatory and secondary pseudo-steady streaming flow fields. An explicit time-marching flux-corrected transport algorithm is used to simulate the acoustic wave formation, propagation, and the resulting flow patterns in the enclosure. The vertical walls of the enclosure are adiabatic whereas the horizontal walls are heated differentially or symmetrically. The transverse temperature gradients are found to strongly affect the acoustic streaming structures and the velocities. The steady streaming velocities significantly increase when the enclosure horizontal walls are asymmetrically heated for both regular and irregular streaming flows. For irregular streaming, the transverse temperature gradients completely change the flow patterns. The irregular streaming velocities are greatly reduced in case of the symmetric temperature increase of the horizontal walls.

scholarly journals A Code for Simulating Heat Transfer in Turbulent Channel Flow

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 756
Author(s):  
Federico Lluesma-Rodríguez ◽  
Francisco Álcantara-Ávila ◽  
María Jezabel Pérez-Quiles ◽  
Sergio Hoyas
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Turbulent Channel Flow ◽  
Passive Scalar ◽  
Direct Numerical Simulations ◽  
Time Dependent ◽  
Navier Stokes ◽  
Thermal Flow ◽  
Navier Stokes Equations

One numerical method was designed to solve the time-dependent, three-dimensional, incompressible Navier–Stokes equations in turbulent thermal channel flows. Its originality lies in the use of several well-known methods to discretize the problem and its parallel nature. Vorticy-Laplacian of velocity formulation has been used, so pressure has been removed from the system. Heat is modeled as a passive scalar. Any other quantity modeled as passive scalar can be very easily studied, including several of them at the same time. These methods have been successfully used for extensive direct numerical simulations of passive thermal flow for several boundary conditions.

Numerical Integration of the Navier-Stokes Equations for a Disk Rotating in a Housing

1985 ◽  
Vol 40 (8) ◽  
pp. 789-799 ◽  
Author(s):  
A. F. Borghesani
Keyword(s):  
Boundary Layer ◽  
Cylindrical Cavity ◽  
Boundary Layer Thickness ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Rotating Disk ◽  
Infinite Medium ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Viscous Torque

The Navier-Stokes equations for the fluid motion induced by a disk rotating inside a cylindrical cavity have been integrated for several values of the boundary layer thickness d. The equivalence of such a device to a rotating disk immersed in an infinite medium has been shown in the limit as d → 0. From that solution and taking into account edge effect corrections an equation for the viscous torque acting on the disk has been derived, which depends only on d. Moreover, these results justify the use of a rotating disk to perform accurate viscosity measurements.

Fast forced liquid film spreading on a substrate: flow, heat transfer and phase transition

2010 ◽  
Vol 656 ◽  
pp. 189-204 ◽  
Author(s):  
ILIA V. ROISMAN
Keyword(s):  
Heat Transfer ◽  
Phase Transition ◽  
Stokes Equations ◽  
Substrate Surface ◽  
Reynolds Numbers ◽  
Drop Impact ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Theoretical Predictions ◽  
Viscous Drop

This theoretical study is devoted to description of fluid flow and heat transfer in a spreading viscous drop with phase transition. A similarity solution for the combined full Navier–Stokes equations and energy equation for the expanding lamella generated by drop impact is obtained for a general case of oblique drop impact with high Weber and Reynolds numbers. The theory is applicable to the analysis of the phenomena of drop solidification, target melting and film boiling. The theoretical predictions for the contact temperature at the substrate surface agree well with the existing experimental data.

Modeling and analysis of solar air channels with attachments of different shapes

2019 ◽  
Vol 29 (5) ◽  
pp. 1815-1845 ◽  
Author(s):  
Younes Menni ◽  
Ahmed Azzi ◽  
A. Chamkha
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Research Work ◽  
Convection Heat Transfer ◽  
Navier Stokes ◽  
Transfer Coefficients ◽  
Navier Stokes Equations ◽  
Content Type ◽  
Modeling And Analysis ◽  
Air Channels

Purpose This paper aims to report the results of numerical analysis of turbulent fluid flow and forced-convection heat transfer in solar air channels with baffle-type attachments of various shapes. The effect of reconfiguring baffle geometry on the local and average heat transfer coefficients and pressure drop measurements in the whole domain investigated at constant surface temperature condition along the top and bottom channels’ walls is studied by comparing 15 forms of the baffle, which are simple (flat rectangular), triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, double V (or W), Z, T, G and epsilon (or e)-shaped, with the Reynolds number changing from 12,000 to 32,000. Design/methodology/approach The baffled channel flow model is controlled by the Reynolds-averaged Navier–Stokes equations, besides the k-epsilon (or k-e) turbulence model and the energy equation. The finite volume method, by means of commercial computational fluid dynamics software FLUENT is used in this research work. Findings Over the range investigated, the Z-shaped baffle gives a higher thermal enhancement factor than with simple, triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, W, T, G and e-shaped baffles by about 3.569-20.809; 3.696-20.127; 3.916-20.498; 1.834-12.154; 1.758-12.107; 7.272-23.333; 6.509-22.965; 8.917-26.463; 8.257-23.759; 5.513-18.960; 8.331-27.016; 7.520-26.592; 6.452-24.324; and 0.637-17.139 per cent, respectively. Thus, the baffle of Z-geometry is considered as the best modern model of obstacles to significantly improve the dynamic and thermal performance of the turbulent airflow within the solar channel. Originality/value This analysis reports an interesting strategy to enhance thermal transfer in solar air channels by use of attachments with various shapes

Measurement and Calculation of Nozzle Guide Vane End Wall Heat Transfer

1998 ◽  
Author(s):  
Neil W. Harvey ◽  
Martin G. Rose ◽  
John Coupland ◽  
Terry Jones
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Guide Vane ◽  
Correction Method ◽  
Navier Stokes ◽  
Design Data ◽  
Navier Stokes Equations ◽  
Wall Functions ◽  
Transfer Rates ◽  
Nozzle Guide

A 3-D steady viscous finite volume pressure correction method for the solution of the Reynolds averaged Navier-Stokes equations has been used to calculate the heat transfer rates on the end walls of a modern High Pressure Turbine first stage stator. Surface heat transfer rates have been calculated at three conditions and compared with measurements made on a model of the vane tested in annular cascade in the Isentropic Light Piston Facility at DERA, Pyestock. The NGV Mach numbers, Reynolds numbers and geometry are fully representative of engine conditions. Design condition data has previously been presented by Harvey and Jones (1990). Off-design data is presented here for the first time. In the areas of highest heat transfer the calculated heat transfer rates are shown to be within 20% of the measured values at all three conditions. Particular emphasis is placed on the use of wall functions in the calculations with which relatively coarse grids (of around 140,000 nodes) can be used to keep computational run times sufficiently low for engine design purposes.

Sign in / Sign up

Export Citation Format

Share Document