Micro Cooling Based on Acoustic Streaming

2008 ◽  
Author(s):  
Hongming Sun ◽  
Hang Guo
Keyword(s):  
Heat Transfer ◽  
Analytical Study ◽  
Stokes Equations ◽  
Acoustic Radiation ◽  
Acoustic Streaming ◽  
Fluid Motion ◽  
Radiation Force ◽  
Cooling Effect ◽  
Navier Stokes ◽  
Navier Stokes Equations

Heat transfer due to forced convection caused by acoustic streaming in microfluidic devices is shown to have potential in cooling effect. However, few studies are made for theoretically studying the fluid motion induced by the acoustic field and forced heat transfer for micro cooling in microdevices. In this paper, Navier-Stokes equations are first employed to study acoustic radiation force and acoustic streaming in microchannel actuated by ultrasonic vibration. Then, an analytical study of fluid motion acoustically induced and the temperature field in microchannel is investigated to determine the enhancement of cooling effect in microchannel with acoustic streaming.

Heat Transfer Enhancement by Irregular Acoustic Streaming in a Shallow Enclosure

2009 ◽  
Author(s):  
Murat K. Aktas ◽  
Turkuler Ozgumus
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Acoustic Streaming ◽  
Fluid Motion ◽  
Bottom Wall ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Left Wall ◽  
Time Marching ◽  
Transverse Temperature

The effects of classical and irregular acoustic streaming structures on convective heat transport in air-filled two dimensional rectangular enclosures are investigated numerically. The oscillatory fluid motion and the resulting streaming motion are driven by cyclic vibration of the enclosure left wall. The fully compressible form of the Navier – Stokes equations are employed to model the transport phenomenon in the enclosure. An explicit time-marching Flux-Corrected Transport (FCT) Algorithm is used to simulate the oscillatory flow field, streaming patterns and associated thermal convection in the enclosure. The vertical walls of enclosure are thermally insulated. The bottom wall is heated isothermally while the top wall is kept at the initial temperature. The transverse temperature gradients strongly affect the acoustic streaming velocities and structures. The irregular streaming significantly augments the heat transfer from the enclosure bottom wall.

scholarly journals A Code for Simulating Heat Transfer in Turbulent Channel Flow

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 756
Author(s):  
Federico Lluesma-Rodríguez ◽  
Francisco Álcantara-Ávila ◽  
María Jezabel Pérez-Quiles ◽  
Sergio Hoyas
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Turbulent Channel Flow ◽  
Passive Scalar ◽  
Direct Numerical Simulations ◽  
Time Dependent ◽  
Navier Stokes ◽  
Thermal Flow ◽  
Navier Stokes Equations

One numerical method was designed to solve the time-dependent, three-dimensional, incompressible Navier–Stokes equations in turbulent thermal channel flows. Its originality lies in the use of several well-known methods to discretize the problem and its parallel nature. Vorticy-Laplacian of velocity formulation has been used, so pressure has been removed from the system. Heat is modeled as a passive scalar. Any other quantity modeled as passive scalar can be very easily studied, including several of them at the same time. These methods have been successfully used for extensive direct numerical simulations of passive thermal flow for several boundary conditions.

Numerical Integration of the Navier-Stokes Equations for a Disk Rotating in a Housing

1985 ◽  
Vol 40 (8) ◽  
pp. 789-799 ◽  
Author(s):  
A. F. Borghesani
Keyword(s):  
Boundary Layer ◽  
Cylindrical Cavity ◽  
Boundary Layer Thickness ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Rotating Disk ◽  
Infinite Medium ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Viscous Torque

The Navier-Stokes equations for the fluid motion induced by a disk rotating inside a cylindrical cavity have been integrated for several values of the boundary layer thickness d. The equivalence of such a device to a rotating disk immersed in an infinite medium has been shown in the limit as d → 0. From that solution and taking into account edge effect corrections an equation for the viscous torque acting on the disk has been derived, which depends only on d. Moreover, these results justify the use of a rotating disk to perform accurate viscosity measurements.

Fast forced liquid film spreading on a substrate: flow, heat transfer and phase transition

2010 ◽  
Vol 656 ◽  
pp. 189-204 ◽  
Author(s):  
ILIA V. ROISMAN
Keyword(s):  
Heat Transfer ◽  
Phase Transition ◽  
Stokes Equations ◽  
Substrate Surface ◽  
Reynolds Numbers ◽  
Drop Impact ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Theoretical Predictions ◽  
Viscous Drop

This theoretical study is devoted to description of fluid flow and heat transfer in a spreading viscous drop with phase transition. A similarity solution for the combined full Navier–Stokes equations and energy equation for the expanding lamella generated by drop impact is obtained for a general case of oblique drop impact with high Weber and Reynolds numbers. The theory is applicable to the analysis of the phenomena of drop solidification, target melting and film boiling. The theoretical predictions for the contact temperature at the substrate surface agree well with the existing experimental data.

Modeling and analysis of solar air channels with attachments of different shapes

2019 ◽  
Vol 29 (5) ◽  
pp. 1815-1845 ◽  
Author(s):  
Younes Menni ◽  
Ahmed Azzi ◽  
A. Chamkha
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Research Work ◽  
Convection Heat Transfer ◽  
Navier Stokes ◽  
Transfer Coefficients ◽  
Navier Stokes Equations ◽  
Content Type ◽  
Modeling And Analysis ◽  
Air Channels

Purpose This paper aims to report the results of numerical analysis of turbulent fluid flow and forced-convection heat transfer in solar air channels with baffle-type attachments of various shapes. The effect of reconfiguring baffle geometry on the local and average heat transfer coefficients and pressure drop measurements in the whole domain investigated at constant surface temperature condition along the top and bottom channels’ walls is studied by comparing 15 forms of the baffle, which are simple (flat rectangular), triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, double V (or W), Z, T, G and epsilon (or e)-shaped, with the Reynolds number changing from 12,000 to 32,000. Design/methodology/approach The baffled channel flow model is controlled by the Reynolds-averaged Navier–Stokes equations, besides the k-epsilon (or k-e) turbulence model and the energy equation. The finite volume method, by means of commercial computational fluid dynamics software FLUENT is used in this research work. Findings Over the range investigated, the Z-shaped baffle gives a higher thermal enhancement factor than with simple, triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, W, T, G and e-shaped baffles by about 3.569-20.809; 3.696-20.127; 3.916-20.498; 1.834-12.154; 1.758-12.107; 7.272-23.333; 6.509-22.965; 8.917-26.463; 8.257-23.759; 5.513-18.960; 8.331-27.016; 7.520-26.592; 6.452-24.324; and 0.637-17.139 per cent, respectively. Thus, the baffle of Z-geometry is considered as the best modern model of obstacles to significantly improve the dynamic and thermal performance of the turbulent airflow within the solar channel. Originality/value This analysis reports an interesting strategy to enhance thermal transfer in solar air channels by use of attachments with various shapes

Measurement and Calculation of Nozzle Guide Vane End Wall Heat Transfer

1998 ◽  
Author(s):  
Neil W. Harvey ◽  
Martin G. Rose ◽  
John Coupland ◽  
Terry Jones
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Guide Vane ◽  
Correction Method ◽  
Navier Stokes ◽  
Design Data ◽  
Navier Stokes Equations ◽  
Wall Functions ◽  
Transfer Rates ◽  
Nozzle Guide

A 3-D steady viscous finite volume pressure correction method for the solution of the Reynolds averaged Navier-Stokes equations has been used to calculate the heat transfer rates on the end walls of a modern High Pressure Turbine first stage stator. Surface heat transfer rates have been calculated at three conditions and compared with measurements made on a model of the vane tested in annular cascade in the Isentropic Light Piston Facility at DERA, Pyestock. The NGV Mach numbers, Reynolds numbers and geometry are fully representative of engine conditions. Design condition data has previously been presented by Harvey and Jones (1990). Off-design data is presented here for the first time. In the areas of highest heat transfer the calculated heat transfer rates are shown to be within 20% of the measured values at all three conditions. Particular emphasis is placed on the use of wall functions in the calculations with which relatively coarse grids (of around 140,000 nodes) can be used to keep computational run times sufficiently low for engine design purposes.

Pulsatile Waterhammer Subject to Laminar Friction

1972 ◽  
Vol 94 (2) ◽  
pp. 467-472 ◽  
Author(s):  
D. A. P. Jayasinghe ◽  
H. J. Leutheusser
Keyword(s):  
Stokes Equations ◽  
Fluid Motion ◽  
Present Theory ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
One Dimensional ◽  
Arbitrary Velocity ◽  
Velocity Input ◽  
Special Case ◽  
Signalling Problem

This paper deals with elastic waves which may be generated in a fluid by the sudden movement of a flow boundary. In particular, an analysis of the classical piston, or signalling problem is presented for the special case of arbitrary velocity input into a stationary fluid contained in a circular, semi-infinite waveguide. The decay of the pulse, as well as the resulting flow development in the inlet region of the pipe are analyzed by means of an asymptotic expansion of the suitably nondimensionalized Navier-Stokes equations for a compressible, nonheat-conducting Newtonian fluid. The results differ significantly from those of the more conventional one-dimensional approach based on the so-called telegrapher’s equation of mathematical physics. The present theory realistically predicts the growth of a boundary layer both in time and position and, hence, it appears to represent the transient fluid motion in a manner which is physically more appealing.

Utilizing Schlieren Imaging to Visualize Heat Transfer Studies

2014 ◽  
Author(s):  
Jacob C. Kaessinger ◽  
Kramer C. Kors ◽  
Jordan S. Lum ◽  
Heather E. Dillon ◽  
Shannon K. Mayer
Keyword(s):  
Heat Transfer ◽  
Undergraduate Students ◽  
Cfd Simulation ◽  
Stokes Equations ◽  
Imaging System ◽  
Empirical Science ◽  
Navier Stokes ◽  
Schlieren Imaging ◽  
Navier Stokes Equations ◽  
Imaging Device

Convective heat transfer beyond explicit solutions to the Navier Stokes equations is often an empirical science. Schlieren imaging is one of the only fluid imaging systems that can directly visualize the density gradients of a fluid using collimated light and refractive properties. The ability to visualize fluid densities is useful in both research and educational fields. A Schlieren imaging device has been constructed by undergraduate students at the University of Portland. The device is used for professorial heat transfer and fluid dynamics research and to help undergraduates visualize and understand natural convection. This paper documents the design decisions, design process, and the final specifications of the Schlieren system. A simple 2-D heated cylindrical model is considered and evaluated using Schlieren imaging, OpenFOAM C.F.D. simulation, and convection analysis using a Nusselt correlation. Results are presented for the three analysis techniques and show excellent verifications between the CFD simulation, Nusselt correlation, and Schlieren imaging system.

An investigation on the instability of a flexible liquid-filled rotor

2019 ◽  
Vol 234 (2) ◽  
pp. 165-172
Author(s):  
Guangding Wang ◽  
Huiqun Yuan ◽  
Hongyun Sun
Keyword(s):  
Stokes Equations ◽  
Fluid Motion ◽  
Coupling Model ◽  
Frequency Equation ◽  
Rotor System ◽  
System Stability ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Continuity Equations ◽  
The Stability

In this paper, the stability of a flexible rotor partially filled with liquid is investigated. On the basis of the Navier-Stokes equations for the incompressible flow, a two-dimensional analytical model is developed for fluid motion. Applying the perturbation method, the linearized Navier-Stokes and continuity equations of fluid particles are obtained. Using the boundary conditions of fluid motion, the fluid forces exerted on the rotor are calculated. According to the established fluid-structure coupling model of the rotor system, the whirling frequency equation, which is applied to determine the stability of the system, is derived. The analysis results of the system stability are compared with the theoretical ones reported in the previous study. Good agreement is shown between the results of the present analysis and the literature results. The influences of the main parameters on the dynamic stability of the rotor system are discussed.

Sign in / Sign up

Export Citation Format

Share Document