Preliminary Safety Analysis of the IRIS Reactor

2002 ◽  
Author(s):  
M. E. Ricotti ◽  
A. Cammi ◽  
A. Cioncolini ◽  
A. Cipollaro ◽  
F. Oriolo ◽  
...  
Keyword(s):  
Natural Circulation ◽  
Heat Removal ◽  
Feed Water ◽  
Deterministic Analysis ◽  
Loss Of Coolant Accident ◽  
Safety Features ◽  
Safety Systems ◽  
Heat Removal System ◽  
Reactor Pressure ◽  
Removal System

A deterministic analysis of the IRIS safety features has been carried out by means of the best-estimate code RELAP (ver. RELAP5 mod3.2). First, the main system components were modeled and tested separately, namely: the Reactor Pressure Vessel (RPV), the modular helical-coil Steam Generators (SG) and the Passive (natural circulation) Emergency Heat Removal System (PEHRS). Then, a preliminary set of accident transients for the whole primary and safety systems was investigated. Since the project was in a conceptual phase, the reported analyses must be considered preliminary. In fact, neither the reactor components, nor the safety systems and the reactor signal logics were completely defined at that time. Three “conventional” design basis accidents have been preliminary evaluated: a Loss Of primary Flow Accident, a Loss Of Coolant Accident and a Loss Of Feed Water accident. The results show the effectiveness of the safety systems also in LOCA conditions; the core remains covered for the required grace period. This provides the basis to move forward to the preliminary design.

Modeling and Experiments of a Passive Decay Heat Removal System for Advanced Nuclear Reactors

2017 ◽  
Author(s):  
Andrea Bersano ◽  
Mario De Salve ◽  
Cristina Bertani ◽  
Nicolò Falcone ◽  
Bruno Panella
Keyword(s):  
Scaling Laws ◽  
Nuclear Reactors ◽  
Natural Circulation ◽  
Heat Removal ◽  
Experimental Results ◽  
Passive Systems ◽  
Decay Heat ◽  
Safety Systems ◽  
Heat Removal System ◽  
Removal System

Within the field of research and development of innovative nuclear reactors, in particular Generation IV reactors and Small Modular Reactors (SMR), the design and the improvement of safety systems play a crucial role. Among all the safety systems high attention is dedicated to passive systems that do not need external energy to operate, with a very high reliability also in the case of station blackout, and which are largely used in evolutionary technology reactors. The aim of this work is the experimental and numerical analysis of a passive system that operates in natural circulation in order to study the mechanism and the efficiency of heat removal. The final goal is the development of a methodology that can be used to study this class of systems and to assess the thermal-hydraulic code RELAP5 for these specific applications. Starting from a commercial size system, which is the decay heat removal system of the experimental lead cooled reactor ALFRED, an experimental facility has been designed, built and tested with the aim of studying natural circulation in passive systems for nuclear applications. The facility has been simulated and optimized using the thermal-hydraulic code RELAP5-3D. During the experimental tests, temperatures and pressures are measured and the experimental results are compared with the ones predicted by the code. The results show that the system operates effectively, removing the given thermal power. The code can predict well the experimental results but high attention must be dedicated to the modeling of components where non-condensable gases are present (condenser pool and surrounding ambient). This facility will be also used to validate the scaling laws among systems that operate in natural circulation.

Analysis of Passive Residual Heat Removal System at Primary Side when Station Blackout Occurs

2014 ◽  
Vol 986-987 ◽  
pp. 231-234
Author(s):  
Jun Teng Liu ◽  
Qi Cai ◽  
Xia Xin Cao
Keyword(s):  
Nuclear Reactor ◽  
Natural Circulation ◽  
Reactor Core ◽  
Saturation Temperature ◽  
Heat Removal ◽  
Primary Circuit ◽  
Station Blackout ◽  
Heat Removal System ◽  
Removal System ◽  
Residual Heat

This paper regarded CNP1000 power plant system as the research object, which is the second-generation half Nuclear Reactor System in our country, and tried to set Westinghouse AP1000 passive residual heat removal system to the primary circuit of CNP1000. Then set up a simulation model based on RELAP5/MOD3.2 program to calculate and analyze the response and operating characteristic of passive residual heat removal system on assumption that Station Blackout occurs. The calculation has the following conclusions: natural circulation was quickly established after accident, which removes core residual heat effectively and keep the core safe. The residual heat can be quickly removed, and during this process the actual temperature was lower than saturation temperature in reactor core.

Development of an evaluation methodology for the natural circulation decay heat removal system in a sodium cooled fast reactor

2015 ◽  
Vol 52 (9) ◽  
pp. 1102-1121 ◽  
Author(s):  
Osamu Watanabe ◽  
Kazuhiro Oyama ◽  
Junji Endo ◽  
Norihiro Doda ◽  
Ayako Ono ◽  
...  
Keyword(s):  
Fast Reactor ◽  
Natural Circulation ◽  
Heat Removal ◽  
Evaluation Methodology ◽  
Decay Heat ◽  
Heat Removal System ◽  
Removal System

scholarly journals CFD Analysis of the Passive Decay Heat Removal System of an LBE-Cooled Fast Reactor

2018 ◽  
Vol 2018 ◽  
pp. 1-11
Author(s):  
Jiarun Mao ◽  
Lei Song ◽  
Yuhao Liu ◽  
Jiming Lin ◽  
Shanfang Huang ◽  
...  
Keyword(s):  
Heat Exchange ◽  
Fast Reactor ◽  
Natural Circulation ◽  
Heat Removal ◽  
Engineering Project ◽  
Decay Heat ◽  
The Core ◽  
Main Vessel ◽  
Heat Removal System ◽  
Removal System

This paper presents capacity of the passive decay heat removal system (DHRS) operated under the natural circulation conditions to remove decay heat inside the main vessel of the Lead-bismuth eutectic cooled Fast Reactor (LFR). The motivation of this research is to improve the inherent safety of the LFR based on the China Accelerator Driven System (ADS) engineering project. Usually the plant is damaged due to the failure of the main pumps and the main heat exchangers under the Station Blackout (SBO). To prevent this accident, we proposed the DHRS based on the diathermic oil cooling for the LFR. The behavior of the DHRS and the plant was simulated using the CFD code STAR CCM+ using LFR with DHRS. The purpose of this analysis is to evaluate the heat exchange capacity of the DHRS and is to provide the reference for structural improvement and experimental design. The results show that the stable natural circulations are established in both the main vessel and the DHRS. During the decay process, the heat exchange power is above the core decay heat power. In addition, in-core decay heat and heat storage inside the main vessel are efficiently removed. All the thermal-hydraulics parameters are within a safe range. Moreover, the highest temperature occurs at the upper surface of the core. A swirl occurs at the corner of the lateral core surface and some improvements should be considered. And the natural circulation driving force can be further increased by reducing the loop resistance or increasing the natural circulation height based on the present design scenario to enhance the heat exchange effect.

scholarly journals An experimental study on natural circulation decay heat removal system for a loop type fast reactor

2016 ◽  
Vol 53 (9) ◽  
pp. 1385-1396 ◽  
Author(s):  
Ayako Ono ◽  
Hideki Kamide ◽  
Jun Kobayashi ◽  
Norihiro Doda ◽  
Osamu Watanabe
Keyword(s):  
Experimental Study ◽  
Fast Reactor ◽  
Natural Circulation ◽  
Heat Removal ◽  
Decay Heat ◽  
Heat Removal System ◽  
Removal System

Loss of Feed Water Accident in an Integral Pressurized Water Reactor (IPWR)

2010 ◽  
Vol 171-172 ◽  
pp. 379-384
Author(s):  
Khan Salah Ud Din ◽  
Min Jun Peng ◽  
Muhammad Zubair
Keyword(s):  
Heat Removal ◽  
Feed Water ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Heat Removal System ◽  
Water Accident ◽  
Relap5 Code ◽  
Removal System ◽  
Residual Heat

In this paper research has been carried out on Loss of Feed Water Accident (LOFW) scenario of the Integral Pressurized Water Reactor ( IPWR) under two circumstances by the use of thermal hydraulic system code i.e Relap5/Mod3.4. In the first one, Passive Residual Heat Removal System (PRHRS) which is designed to absorb core residual heat in case of transient conditions is included which has the function of operating under the accident vulnerabilities. Concerning with the second case i.e without the use of PRHRS rather a tank of water which has the capacity of about 8% of the total feed water supply and is operated under accident scenario is considered. Taken into account these conditions,first the nodalization diagram of the two cases have been figured out then according to the LOFW accident time event scenario use the Relap5 code to simulate the accident. Finally the graphical explanation (separately) of the two cases with graphical approach as well as the conclusion is given at the end.

Sign in / Sign up

Export Citation Format

Share Document