Shaking Table Tests and Numerical Simulation Analysis of a 1:15 Scale Model Reinforced Concrete Containment Vessel

2013 ◽  
Author(s):  
Xiaolei Wang ◽  
Dagang Lu ◽  
Gangling Hou
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Simulation Analysis ◽  
Safety Margin ◽  
Shaking Table ◽  
Scale Model ◽  
Shaking Table Tests ◽  
Ground Acceleration ◽  
Containment Vessel ◽  
Earthquake Motion

In order to verify the seismic capacity of reinforced concrete containment vessel (RCCV) under the design earthquake level of SL-2 (peak acceleration 0.25g), shaking table tests of a 1:15 model RCCV are carried out. The El Centro earthquake motion record, the Taft earthquake motion record as well as an artificial earthquake acceleration are employed as the input excitations. There are three load cases for each test stage, with the peak ground acceleration (PGA) being 0.1g, 0.2g and 0.3g, respectively, corresponding to 0.088g, 0.175g and 0.263g for the prototype RCCV structure because of the acceleration ratio of 1.14. The test results indicate that under the earthquake excitation of the acceleration peak 0.1g, 0.2g and 0.3g, the tensile strains at monitoring points on the cylinder don’t reach the cracking level. Using the general-purpose nonlinear finite element analysis program ANSYS, a three-dimensional (3D) model of the scaled model reinforced concrete containment vessel is modeled. The numerical simulation analysis results could match the results of the tests very well. It is shown by the results of the shaking table tests that the model RCCV is still within the elastic range as a whole. In order to analyze the yield displacement of the RCCV, a static nonlinear pushover analysis of the RCCV is carried out. The result shows that the RCCV had sufficient seismic safety margin.

Geotechnical Centrifuge Shaking Table Tests and Numerical Simulation of Soil-Structure

2012 ◽  
Vol 256-259 ◽  
pp. 372-376 ◽  
Author(s):  
Jing Bo Liu ◽  
Dong Dong Zhao ◽  
Wen Hui Wang ◽  
Xiang Qing Liu
Keyword(s):  
Numerical Simulation ◽  
Soil Structure ◽  
Shaking Table ◽  
Vertical Line ◽  
Shaking Table Tests ◽  
Geotechnical Centrifuge ◽  
Centrifuge Model ◽  
Soil Structures ◽  
Input Motion ◽  
Centrifuge Model Tests

Two geotechnical centrifuge model tests of a soil-structure system with different burial depths are performed to investigate the interaction between soil and structure. The tests are performed at 50 gravitational centrifuge accelerations and the input motion is Kobe wave. This paper focuses on the accelerations and displacements in the soil-structures system. The peak accelerations and displacements along the axis of the structure and along the vertical line 17cm away from the axis are presented. The acceleration and displacement response due to the interaction between soil and structure are studied.

Earthquake induced floor accelerations on a high-rise building: Scale model tests on a shaking table

2021 ◽  
Author(s):  
Fabio Rizzo ◽  
Alessandro Pagliaroli ◽  
Giuseppe Maddaloni ◽  
Antonio Occhiuzzi ◽  
Andrea Prota
Keyword(s):  
Soil Structure ◽  
Shaking Table ◽  
Soil Structure Interaction ◽  
Scale Model ◽  
Structural Elements ◽  
Shaking Table Tests ◽  
Building Model ◽  
High Rise ◽  
High Rise Building ◽  
Story Building

<p>The paper discusses results of shaking table tests on an in-scale high-rise building model. The purpose was to calibrate a dynamic numerical model for multi-hazard analyses to investigate the effects of floor acceleration. Accelerations, because of vibration of non-structural elements, affect both the comfort and safety of people. The research investigates the acceleration effects of both seismic and wind forces on an aeroelastic in-scale model of a multi-story building. The paper discusses the first phase of experiments and gives results of floor accelerations induced by several different base seismic impulses. Structural analyses were first performed on the full-scale prototype to take soil-structure interaction into account. Subsequently the scale model was designed through aeroelastic scale laws. Shaking table experiments were then carried out under different base accelerations. The response of the model and, in particular, amplification of effects from base to top are discussed.</p>

Material Modeling of Concrete for the Numerical Simulation of Steel Plate Reinforced Concrete Panels Subjected to Impacting Loading

2017 ◽  
Vol 139 (2) ◽  
Author(s):  
Huiyun Li ◽  
Guangyu Shi
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Steel Plate ◽  
Material Model ◽  
Tensile Failure ◽  
Scale Model ◽  
Flow Rule ◽  
Plastic Damage ◽  
The Impact ◽  
Concrete Model

The steel plate reinforced concrete (SC) walls and roofs are effective protective structures in nuclear power plants against aircraft attacks. The mechanical behavior of the concrete in SC panels is very complicated when SC panels are under the action of impacting loading. This paper presents a dynamic material model for concrete subjected to high-velocity impact, in which pressure hardening, strain rate effect, plastic damage, and tensile failure are taken into account. The loading surface of the concrete undergoing plastic deformation is defined based on the extended Drucker–Prager strength criterion and the Johnson–Cook material model. The associated plastic flow rule is utilized to evaluate plastic strains. Two damage parameters are introduced to characterize, respectively, the plastic damage and tensile failure of concrete. The proposed concrete model is implemented into the transient nonlinear dynamic analysis code ls-dyna. The reliability and accuracy of the present concrete material model are verified by the numerical simulations of standard compression and tension tests with different confining pressures and strain rates. The numerical simulation of the impact test of a 1/7.5-scale model of an aircraft penetrating into a half steel plate reinforced concrete (HSC) panel is carried out by using ls-dyna with the present concrete model. The resulting damage pattern of concrete slab and the predicted deformation of steel plate in the HSC panel are in good agreement with the experimental results. The numerical results illustrate that the proposed concrete model is capable of properly charactering the tensile damage and failure of concrete.

scholarly journals Seismic Protection of Cabinet Stored Cultural Relics with Silicone Dampers

2018 ◽  
Vol 2018 ◽  
pp. 1-15
Author(s):  
Xiaoqing Ning ◽  
Junwu Dai ◽  
Wen Bai ◽  
Yongqiang Yang ◽  
Lulu Zhang
Keyword(s):  
Numerical Simulation ◽  
Seismic Performance ◽  
Shaking Table ◽  
Seismic Protection ◽  
Shaking Table Tests ◽  
Seismic Methods ◽  
Cultural Relics

Cultural relics are precious properties of all humankind, the damage of which is nonresilient. In previous earthquakes, stored cultural relics have shown poor seismic performance, so effective seismic methods are urgently needed. However, due to various restrictions, traditional damping methods are not suitable for the cultural relics stored in the Palace Museum. An efficient damping method, composed of silicone damper and connecting elements, is proposed to protect these stored cultural relics. This novel damping device is very convenient to install and no change or move for the original structures is needed. It is suitable for various kinds of new and existing relic cabinets. In order to validate the effectiveness of this novel damping method, both numerical simulation and shaking table tests are carried out. Results show that this method can effectively enhance the seismic performance of relic cabinet itself and the internal cultural relics. Relic cabinets with damping devices deform significantly less than noncontrol cabinets while the inside relics also have less sliding or overturning. Overall, a damping method, designed for seismic protection of cabinet stored cultural relics, is proposed and its effectiveness has been successfully demonstrated.

Sign in / Sign up

Export Citation Format

Share Document