Two Dimensional Simulation of Flow and Heat Transfer Characteristics of Turbulent Jets

2010 ◽  
Author(s):  
Tarek Abdel-Salam
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Turbulent Jets ◽  
Reynolds Numbers ◽  
Impinging Jets ◽  
Two Dimensional ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Dimensional Simulation

In this study, flow and heat transfer characteristics of two-dimensional impinging jets are investigated numerically. Flow geometries under consideration are single and multiple impinging jets issued from a plane wall. Both confined and unconfined configurations are simulated. Effects of Reynolds number and the distance between the jets are investigated. Results are obtained with a finite volume CFD code. Structured grids are used in all cases of the present study. Turbulence is treated with a two equation k-ε model. Different jet velocities have been examined corresponding to Reynolds numbers of 5,000 to 20,000. Results show that the Reynolds number has significant effect on the heat transfer rate and has no effect on the location of the maximum Nusselt number.

Numerical Study of Flow and Heat Transfer Characteristics of Impinging Jets

2010 ◽  
Author(s):  
Tarek M. Abdel-Salam
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Numerical Study ◽  
Three Dimensional ◽  
Impinging Jets ◽  
Two Dimensional ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

This study presents results for flow and heat transfer characteristics of two-dimensional rectangular impinging jets and three-dimensional circular impinging jets. Flow geometries under consideration are single and multiple impinging jets issued from a plane wall. Both confined and unconfined configurations are simulated. Effects of Reynolds number and the distance between the jets are investigated. Results are obtained with a finite volume computational fluid dynamics (CFD) code. Structured grids are used in all cases of the present study. Turbulence is treated with a two equation k-ε model. Different jet velocities have been examined corresponding to Reynolds numbers of 5,000 to 20,000. Results of the three-dimensional cases show that Reynolds number has no effect on the velocity distribution of the center jet. Results of both two-dimensional and three-dimensional cases show that Reynolds number highly affects the heat transfer and values of the Nusselt number. The maximum Nusselt number was always found at the stagnation point of the center jet.

scholarly journals Heat transfer and flow region characteristics study in a non-annular channel between rotor and stator

2012 ◽  
Vol 16 (2) ◽  
pp. 593-603 ◽  
Author(s):  
M. Nili-Ahmadabadi ◽  
H. Karrabi
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Flow Characteristics ◽  
Annular Channel ◽  
Flow Region ◽  
Air Gap ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Slip Ring

This paper will present the results of the experimental investigation of heat transfer in a non-annular channel between rotor and stator similar to a real generator. Numerous experiments and numerical studies have examined flow and heat transfer characteristics of a fluid in an annulus with a rotating inner cylinder. In the current study, turbulent flow region and heat transfer characteristics have been studied in the air gap between the rotor and stator of a generator. The test rig has been built in a way which shows a very good agreement with the geometry of a real generator. The boundary condition supplies a non-homogenous heat flux through the passing air channel. The experimental devices and data acquisition method are carefully described in the paper. Surface-mounted thermocouples are located on the both stator and rotor surfaces and one slip ring transfers the collected temperature from rotor to the instrument display. The rotational speed of rotor is fixed at three under: 300rpm, 900 rpm and 1500 rpm. Based on these speeds and hydraulic diameter of the air gap, the Reynolds number has been considered in the range: 4000<Rez<30000. Heat transfer and pressure drop coefficients are deduced from the obtained data based on a theoretical investigation and are expressed as a formula containing effective Reynolds number. To confirm the results, a comparison is presented with Gazley?s (1985) data report. The presented method and established correlations can be applied to other electric machines having similar heat flow characteristics.

Flow and Heat Transfer Enhancement Characteristics of Impinging Jets in Transitional Time Periodic Flow Regimes

2010 ◽  
Author(s):  
Julian P. Gutierrez ◽  
Alfonso Ortega ◽  
Amador M. Guzman
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Temporal Evolution ◽  
Flow Regimes ◽  
Periodic Flow ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Nusselt Numbers ◽  
Flow And Heat Transfer ◽  
Time Average

The flow and heat transfer characteristics of an impinging jet on a perpendicular flat surface are obtained by two dimensional numerical simulations of laminar and transitional flow regimes for the Reynolds number of Re = 300, 350, and 400 for a Prandtl number of Pr = 0.7. A fixed jet to plate spacing of H/W = 5 and a given heat flux on the plate surface are considered. Temporal evolution of velocity and temperature fields, Fourier spectra of the velocity temporal evolution and time average local and global Nusselt numbers are obtained for increasing Reynolds numbers for determining the time depending behavior and its effect on the heat transfer characteristics. Numerical simulation results demonstrate that self-sustained transitional periodic flow regimes arise from a laminar regime, when the Reynolds number is further increased to Re = 400 and that these regimes spread out to the whole domain with similar time dependent characteristics due to the flow incompressibility. Evaluations of time average local and global Nusselt numbers demonstrate the asymmetric Gaussian-type spatial distribution and the increase of both parameters when the flow evolves through the transitional periodic regime, with reasonable increases on the pumping power requirements.

Heat Transfer Characteristics of Low Reynolds Number Turbulent Swirling LPG/Air Flame Impinging on a Flat Surface

2010 ◽  
Author(s):  
Arun Kaushal ◽  
Gurpreet Singh ◽  
Subhash Chander ◽  
Anjan Ray
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Flat Surface ◽  
Low Reynolds Number ◽  
Reynolds Numbers ◽  
Heat Transfer Characteristics ◽  
Swirl Number ◽  
Transfer Characteristics ◽  
Swirling Flames ◽  
Low Reynolds

An experimental study has been conducted to determine the heat transfer characteristics for low Reynolds number turbulent swirling LPG/Air flames impinging on a flat surface. Effect of variation of Reynolds number (3000–7000), dimensionless separation distance (H/d = 1 to 6) and equivalence ratio (φ = 0.8 to 2) on heat transfer characteristics has been determined at constant swirl number of 4. Further, experiments were also conducted to investigate the effect of swirl number on heat transfer characteristics at Re = 7000, φ = 1.0 and H/d = 5. It has been concluded that the major drawback of flame impingement i.e., non-uniformity in the heating can be resolved by using swirling flames in place of non-swirling flames. With increase in Reynolds number the flame becomes longer and broader. Also, at higher Re the flame becomes noisy and violent because of the enhanced turbulences in the flame. A dip in the temperature was observed at the stagnation point at all Re and this dip was more significant at higher Re. At small separation distances (H/d = 1 and 2) and at large Reynolds numbers (Re = 7000) heating is comparatively more non-uniform because of close proximity of the visible reaction zone to the plate resulting in intense heating in the stagnation region. High average heat fluxes were obtained at low separation distances and at larger Reynolds numbers.

Numerical Investigation on the Flow and Heat Transfer Characteristics of the Superheated Steam in the Wedge Duct With Pin-Fins

2013 ◽  
Author(s):  
Gaoliang Liao ◽  
Xinjun Wang ◽  
Xiaowei Bai ◽  
Ding Zhu ◽  
Jinling Yao
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Three Dimensional ◽  
Heat Transfer Characteristics ◽  
Pin Fin ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Pin Fins ◽  
Steam Superheat

By using the CFX software, the three-dimensional flow and heat transfer characteristics in the cooling duct with pin-fin in the blade trailing edge were numerically simulated. The effects of pin-fin arrangements, Reynolds number, steam superheat degrees, streamwise pin density and convergence angle of the wedge duct on the flow and heat transfer characteristics were analysed. The results show that the Nusselt number on the endwall and pin-fin surfaces as well as the pin-fin row averaged Nusselt number increase with the increasing of Reynolds number, while it decreased with the with the increasing of X/D. The pressure drop increases with the increasing of Reynolds number while decreases with the increasing of X/D in the wedge duct. The degree of superheat has little effect on the pressure loss in the wedge duct. A comprehensive analysis and comparison show that the highest thermal performance is reached in the wedge duct when the value of X/D is 1.5.

Sign in / Sign up

Export Citation Format

Share Document