A Study on Length Scale Effects on Indentation Delamination of Thin Films

2004 ◽  
Author(s):  
W. Li ◽  
S. Qu ◽  
T. Siegmund ◽  
Y. Huang
Keyword(s):  
Plastic Deformation ◽  
Strain Gradient ◽  
Cohesive Zone ◽  
Cohesive Zone Model ◽  
Scale Effects ◽  
Scale Dependence ◽  
Zone Model ◽  
Length Scale ◽  
Gradient Plasticity ◽  
Elastic Substrates

Simulations of indentation delamination of ductile films on elastic substrates are performed. A cohesive zone model accounts for initiation and growth of interface delaminations and a strain gradient plasticity framework for the length scale dependence of plastic deformation. With the cohesive zone model and the strain gradient formulation two length scales are introduced in to the analysis.

Nanoindentation study of plasticity length scale effects in LIGA Ni microelectromechanical systems structures

2003 ◽  
Vol 18 (3) ◽  
pp. 719-728 ◽  
Author(s):  
J. Lou ◽  
P. Shrotriya ◽  
T. Buchheit ◽  
D. Yang ◽  
W. O. Soboyejo
Keyword(s):  
Plastic Deformation ◽  
Strain Gradient ◽  
Indentation Depth ◽  
Microelectromechanical Systems ◽  
Scale Parameter ◽  
Scale Effects ◽  
Length Scale Parameter ◽  
Length Scale ◽  
Gradient Plasticity ◽  
Cube Corner

This paper presents the results of a nanoindentation study of the effects of strain gradient plasticity on the elastic–plastic deformation of lithographie, galvanoformung, abformung (LIGA) Ni microelectromechanical systems (MEMS) structures plated from sulfamate baths. Both Berkovich and North Star/cube corner indenter tips were used in the study to investigate possible effects of residual indentation depth on the hardness of LIGA Ni MEMS structures between the micro- and nanoscales. A microstructural length scale parameter, , was determined for LIGA nickel films. This is shown to be consistent with a stretch gradient length-scale parameter, ls, of approximately 0.9 μm.

A damage-based cohesive zone model for plastic deformation behavior

2014 ◽  
Vol 2014.27 (0) ◽  
pp. 495-496
Author(s):  
Yuichi Shintaku ◽  
Mayu Muramatsu ◽  
Seiichiro Tsutsumi ◽  
Kenjiro Terada ◽  
Takashi Kyoya ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Cohesive Zone ◽  
Deformation Behavior ◽  
Cohesive Zone Model ◽  
Zone Model ◽  
Plastic Deformation Behavior

scholarly journals Ultrasonic Deicing Efficiency Prediction and Validation for a Flat Deicing System

2020 ◽  
Vol 10 (19) ◽  
pp. 6640
Author(s):  
Zhonghua Shi ◽  
Zhenhang Kang ◽  
Qiang Xie ◽  
Yuan Tian ◽  
Yueqing Zhao ◽  
...  
Keyword(s):  
Lead Zirconate Titanate ◽  
Cohesive Zone ◽  
Cohesive Zone Model ◽  
Lead Zirconate ◽  
Efficiency Factor ◽  
Zone Model ◽  
Shear Stresses ◽  
Stress Distributions ◽  
Total Energy Density ◽  
Average Shear

An effective deicing system is needed to be designed to conveniently remove ice from the surfaces of structures. In this paper, an ultrasonic deicing system for different configurations was estimated and verified based on finite element simulations. The research focused on deicing efficiency factor (DEF) discussions, prediction, and validations. Firstly, seven different configurations of Lead zirconate titanate (PZT) disk actuators with the same volume but different radius and thickness were adopted to conduct harmonic analysis. The effects of PZT shape on shear stresses and optimal frequencies were obtained. Simultaneously, the average shear stresses at the ice/substrate interface and total energy density needed for deicing were calculated. Then, a coefficient named deicing efficiency factor (DEF) was proposed to estimate deicing efficiency. Based on these results, the optimized configuration and deicing frequency are given. Furthermore, four different icing cases for the optimize configuration were studied to further verify the rationality of DEF. The effects of shear stress distributions on deicing efficiency were also analyzed. At same time, a cohesive zone model (CZM) was introduced to describe interface behavior of the plate and ice layer. Standard-explicit co-simulation was utilized to model the wave propagation and ice layer delamination process. Finally, the deicing experiments were carried out to validate the feasibility and correctness of the deicing system.

scholarly journals An Improved Cohesive Zone Model for Interface Mixed-Mode Fractures of Railway Slab Tracks

2021 ◽  
Vol 11 (1) ◽  
pp. 456
Author(s):  
Yanglong Zhong ◽  
Liang Gao ◽  
Xiaopei Cai ◽  
Bolun An ◽  
Zhihan Zhang ◽  
...  
Keyword(s):  
Interface Crack ◽  
Cohesive Zone ◽  
Mixed Mode ◽  
Cohesive Zone Model ◽  
Complex Loading ◽  
Bending Test ◽  
Mixed Mode Fracture ◽  
Zone Model ◽  
Slab Track ◽  
Interfacial Cracks

The interface crack of a slab track is a fracture of mixed-mode that experiences a complex loading–unloading–reloading process. A reasonable simulation of the interaction between the layers of slab tracks is the key to studying the interface crack. However, the existing models of interface disease of slab track have problems, such as the stress oscillation of the crack tip and self-repairing, which do not simulate the mixed mode of interface cracks accurately. Aiming at these shortcomings, we propose an improved cohesive zone model combined with an unloading/reloading relationship based on the original Park–Paulino–Roesler (PPR) model in this paper. It is shown that the improved model guaranteed the consistency of the cohesive constitutive model and described the mixed-mode fracture better. This conclusion is based on the assessment of work-of-separation and the simulation of the mixed-mode bending test. Through the test of loading, unloading, and reloading, we observed that the improved unloading/reloading relationship effectively eliminated the issue of self-repairing and preserved all essential features. The proposed model provides a tool for the study of interface cracking mechanism of ballastless tracks and theoretical guidance for the monitoring, maintenance, and repair of layer defects, such as interfacial cracks and slab arches.

Cohesive Zone Model for the Interface of Multiwalled Carbon Nanotubes and Copper: Molecular Dynamics Simulation

2014 ◽  
Vol 5 (3) ◽  
Author(s):  
Ibrahim Awad ◽  
Leila Ladani
Keyword(s):  
Carbon Nanotubes ◽  
Normal Stress ◽  
Multiwalled Carbon Nanotubes ◽  
Cohesive Zone ◽  
Large Scale ◽  
Cohesive Zone Model ◽  
Dynamics Simulation ◽  
Zone Model ◽  
Multiwalled Carbon ◽  
Significant Difference

Due to their superior mechanical and electrical properties, multiwalled carbon nanotubes (MWCNTs) have the potential to be used in many nano-/micro-electronic applications, e.g., through silicon vias (TSVs), interconnects, transistors, etc. In particular, use of MWCNT bundles inside annular cylinders of copper (Cu) as TSV is proposed in this study. However, the significant difference in scale makes it difficult to evaluate the interfacial mechanical integrity. Cohesive zone models (CZM) are typically used at large scale to determine the mechanical adherence at the interface. However, at molecular level, no routine technique is available. Molecular dynamic (MD) simulations is used to determine the stresses that are required to separate MWCNTs from a copper slab and generate normal stress–displacement curves for CZM. Only van der Waals (vdW) interaction is considered for MWCNT/Cu interface. A displacement controlled loading was applied in a direction perpendicular to MWCNT's axis in different cases with different number of walls and at different temperatures and CZM is obtained for each case. Furthermore, their effect on the CZM key parameters (normal cohesive strength (σmax) and the corresponding displacement (δn) has been studied. By increasing the number of the walls of the MWCNT, σmax was found to nonlinearly decrease. Displacement at maximum stress, δn, showed a nonlinear decrease as well with increasing the number of walls. Temperature effect on the stress–displacement curves was studied. When temperature was increased beyond 1 K, no relationship was found between the maximum normal stress and temperature. Likewise, the displacement at maximum load did not show any dependency to temperature.

Sign in / Sign up

Export Citation Format

Share Document