Elastic Effects on Rayleigh-Be´nard-Marangoni Convection in Liquids With Temperature-Dependent Viscosity

Author(s):  
G. N. Sekhar ◽  
G. Jayalatha

A linear stability analysis of convection in viscoelastic liquids with temperature-dependent viscosity is studied using normal modes and Galerkin method. Stationary convection is shown to be the preferred mode of instability when the ratio of strain retardation parameter to stress relaxation parameter (elasticity ratio) is greater than unity. When the ratio is less than unity the possibility of oscillatory convection is shown to arise. Oscillatory convection is studied numerically for Rivlin-Ericksen, Walters B′, Maxwell and Jeffreys liquids by considering free-free and rigid-free isothermal/adiabatic boundaries. It is found that there is a tight coupling between the Rayleigh and Marangoni numbers, with an increase in one resulting in a decrease in the other. The effect of variable viscosity parameter is shown to destabilize the system. The problem reveals the stabilizing nature of strain retardation parameter and destabilizing nature of stress relaxation parameter, on the onset of convection. The Maxwell liquids are found to be more unstable than the one subscribing to Jeffreys description whereas the Rivlin-Ericksen and Walters B′ liquids are comparatively more stable. Rigid-free adiabatic boundary combination is found to give rise to a most stable system, whereas the free isothermal free adiabatic combination gives rise to a most unstable system. The problem has applications in non-isothermal systems having viscoelastic liquids as working media.

2009 ◽  
Vol 64 (9-10) ◽  
pp. 588-596 ◽  
Author(s):  
Muhammad Y. Malik ◽  
Azad Hussain ◽  
Sohail Nadeem ◽  
Tasawar Hayat

The influence of temperature dependent viscosity on the flow of a third grade fluid between two coaxial cylinders is carried out. The heat transfer analysis is further analyzed. Homotopy analysis method is employed in finding the series solutions. The effects of pertinent parameters have been explored by plotting graphs.


Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2538 ◽  
Author(s):  
Marina Astanina ◽  
Mikhail Sheremet ◽  
U. S. Mahabaleshwar ◽  
Jitender Singh

Cooling of heat-generating elements is a challenging problem in engineering. In this article, the transient free convection of a temperature-dependent viscosity liquid inside the porous cavity with copper radiator and the heat-generating element is studied using mathematical modeling techniques. The vertical and top walls of the chamber are kept at low constant temperature, while the bottom wall is kept adiabatic. The working fluid is a heat-conducting liquid with temperature-dependent viscosity. A mathematical model is developed based on dimensionless stream function, vorticity, and temperature variables. The governing properties are the variable viscosity, geometric parameters of the radiator, and size of thermally insulated strip on vertical surfaces of the cavity. The effect of these parameters on the energy transport and circulation patterns are analyzed numerically. Based on the numerical results obtained, recommendations are given on the optimal values of the governing parameters for the effective operation of the cooling system. It is shown that the optimal number of radiator fins for the cooling system configuration under consideration is 3. In addition, the thermal insulation of the vertical walls and the increased thickness of the radiator fins have a negative effect on the operation of the cooling system.


2019 ◽  
Vol 74 (3) ◽  
pp. 235-244 ◽  
Author(s):  
Basant K. Jha ◽  
Michael O. Oni

AbstractAn exact solution for mixed convection flow with temperature-dependent viscosity in a vertical channel subject to wall asymmetric heating and concentration is obtained. The momentum, concentration, and energy equations governing the flow configuration are derived and solved exactly by incorporating the variable viscosity term, which is assumed to exponentially decrease/increase with temperature difference into the momentum equation. The roles of governing parameters are depicted with the aid of tables and line graphs. Results show that buoyancy ratio parameter can bring about the occurrence of flow reversal at the walls. It is also found that heat transfer, total species rate, skin friction, and reverse flow occurrence are enhanced in the presence of temperature-dependent viscosity.


1989 ◽  
Vol 206 ◽  
pp. 497-515 ◽  
Author(s):  
A. C. Or

Convection of two-dimensional rolls in an infinite horizontal layer of fluid-saturated porous medium heated from below is studied numerically. Several important finite-amplitude states are isolated, and their bifurcation properties are shown. Effects of the temperature-dependent viscosity are included. The stability of these states is investigated with respect to the class of disturbances that have a ½π phase shift relative to the basic state. In particular, the oscillatory mechanism and the mean-flow generating mechanism through the variable viscosity are discussed.


2008 ◽  
Vol 86 (2) ◽  
pp. 383-389 ◽  
Author(s):  
O D Makinde

This study investigates the inherent irreversibility in the flow of a variable (temperature-dependent) viscosity fluid through a channel with parallel plates. The channel is narrow so that the lubrication approximation may be applied, and the temperature-dependent nature of viscosity is assumed to follow an exponential model. The system is assumed to exchange heat with the ambient surroundings following Newton’s cooling law. Using a perturbation method coupled with a special type of Hermite–Padé approximation technique, the simplified governing nonlinear equations are solved and the important properties of overall flow structure, including velocity field, temperature field, and thermal criticality conditions are derived, which essentially expedite obtaining expressions for volumetric entropy generation numbers, irreversibility distribution ratio, and the Bejan number in the flow field. PACS Nos.: 44.10.+a, 47.11.–j, 47.15.gm


Author(s):  
S Siddiqa ◽  
S Asghar ◽  
M A Hossain

The effect of radiation on laminar natural convection flow of a viscous incompressible fluid over a semi-infinite flat plate inclined at a small angle to the horizontal with strong temperature-dependent viscosity has been investigated. The Rosseland approximation is considered while modelling the problem. The non-similar equations are obtained for upstream, downstream, and entire regimes, which are then solved numerically. For constant viscosity, the series solution technique has been employed in order to obtain solutions that are valid near the leading edge as well as in the downstream regime. Later, solutions of the governing equations have been obtained using the finite difference method along with the Keller box technique, taking into consideration variable viscosity. Effects of physical parameters like conduction—radiation para-meter Rd, surface temperature parameter θw, variable viscosity parameter λ, and Prandtl number Pr are shown on the local skin-friction coefficient Cf and the local Nusselt number, Nu. Effects of the parameters on the streamlines are also shown around the point of separation that occurs along the negatively inclined surface.


2018 ◽  
Vol 387 ◽  
pp. 600-614 ◽  
Author(s):  
Manoj Kumar Nayak ◽  
M. Mubashir Bhatti ◽  
Oluwole Daniel Makinde ◽  
Noreen Sher Akbar

Present study is to a great extent explains the time dependent squeezing magneto-hydrodynamic flow of Sodium Cloride-Carbon nanopowder nanofluid past a sensor surface. The current study is all about the influence of temperature dependent viscosity represented by Reynolds model and Vogel’s model on the MHD flow of the nanofluid considered. Successive Taylor series linearization method has been implemented in order to obtain the numerical solution of the transformed non-linear governing equations. It is very important to mention that irrespective of whether it is NaCl-Graphite or NaCl-Carbon Black or NaCl-Carbon nanopowder, the presence of magnetic field strength contributes the impede movement of the fluid while enhancement in the volume fraction, Reynolds model and Vogel’s model viscosity parameters exhibit the diametrically opposite trend. Keywords: NaCl-CNP nanofluid; MHD; Variable viscosity; Unsteady Squeeze flow; Sensor surface.


2016 ◽  
Vol 09 (02) ◽  
pp. 1650029 ◽  
Author(s):  
Q. Hussain ◽  
S. Asghar ◽  
T. Hayat ◽  
A. Alsaedi

In this paper, we investigate the effects of variable viscosity and thermal conductivity on peristaltic flow of Jeffrey fluid in an asymmetric channel. The inclined magnetic field, viscous dissipation and Joule heating are also considered. Wave frame and long wavelength approximations are made to formulate the problem. Pressure gradient, pressure drop per wavelength, velocity and temperature profiles are calculated analytically and discussed graphically. Comparison is made with the previous work for reliability.


2010 ◽  
Vol 15 (3) ◽  
pp. 257-270 ◽  
Author(s):  
M. M. M. Abdou

A numerical model is developed to study the effect of thermal radiation on unsteady boundary layer flow with temperature dependent viscosity and thermal conductivity due to a stretching sheet in porous media. The Rosseland diffusion approximation is used to describe the radiative heat flux in the energy equation. The governing equations reduced to similarity boundary layer equations using suitable transformations and then solved using the Runge–Kutta numerical integration, procedure in conjunction with shooting technique. A parametric study illustrating the influence of the radiation R, variable viscosity ε, Darcy number Da, porous media inertia coefficient γ, thermal conductivity κ and unsteady A parameters on skin friction and Nusselt number.


2019 ◽  
Vol 29 (12) ◽  
pp. 4607-4623 ◽  
Author(s):  
Zahid Ahmed ◽  
Sohail Nadeem ◽  
Salman Saleem ◽  
Rahmat Ellahi

Purpose The purpose of this paper is to present a novel model on the unsteady MHD flow of heat transfer in carbon nanotubes with variable viscosity over a shrinking surface. Design/methodology/approach The temperature-dependent viscosity makes the proposed model non-linear and coupled. Consequently, the resulting non-linear partial differential equations are first reformed into set of ordinary differential equations through appropriate transformations and boundary layer approximation and are then solved numerically by the Keller box method. Findings Graphical and numerical results are executed keeping temperature-dependent viscosity of nanofluid. It is noted that, for diverse critical points, it is found that at one side of these critical values, multiple solutions exist; on the other side, no solution exists. A comparison is also computed for the special case of existing study. The temperature and pressure profiles are also plotted for various effective parameters. Originality/value The work is original.


Sign in / Sign up

Export Citation Format

Share Document