Experimental Investigation of a Flat-Plate Oscillating Heat Pipe During High-Gravity Loading

2011 ◽  
Author(s):  
Hongbin Ma ◽  
Scott M. Thompson ◽  
Aaron A. Hathaway ◽  
Chris D. Smoot ◽  
Corey A. Wilson ◽  
...  
Keyword(s):  
Flat Plate ◽  
Heat Pipe ◽  
Heat Transfer Performance ◽  
Unique Feature ◽  
Three Dimensional ◽  
High Gravity ◽  
Transfer Performance ◽  
Oscillating Heat Pipe ◽  
Novel Design ◽  
Independent Heat

The thermal performance of a miniature, three-dimensional flat-plate oscillating heat pipe (3D FP-OHP) was experimentally investigated during high gravity loading with non-favorable evaporator positioning. The heat pipe had dimensions of 3.0 × 3.0 × 0.254 cm3 and utilized a novel design concept incorporating a two-layer channel arrangement. The device was charged with acetone and tested at a heat input of 95 W within a spin-table centrifuge. It was found that the heat pipe operated and performed near-independent of the investigated hyper-gravity loading up to 10g. Results show that at ten times the acceleration due to gravity (10g) the effective thermal conductivity was almost constant and even slightly increased which is very different from a conventional heat pipe. The gravity-independent heat transfer performance provides a unique feature of OHPs.

Robust Thermal Performance of a Flat-Plate Oscillating Heat Pipe During High-Gravity Loading

2011 ◽  
Vol 133 (10) ◽  
Author(s):  
S. M. Thompson ◽  
A. A. Hathaway ◽  
C. D. Smoot ◽  
C. A. Wilson ◽  
H. B. Ma ◽  
...  
Keyword(s):  
Flat Plate ◽  
Heat Pipe ◽  
Thermal Performance ◽  
Heat Transfer Performance ◽  
Unique Feature ◽  
Three Dimensional ◽  
High Gravity ◽  
Oscillating Heat Pipe ◽  
Novel Design ◽  
Independent Heat

The thermal performance of a miniature, three-dimensional flat-plate oscillating heat pipe (3D FP-OHP) was experimentally investigated during high-gravity loading with nonfavorable evaporator positioning. The heat pipe had dimensions of 3.0 × 3.0 × 0.254 cm3 and utilized a novel design concept incorporating a two-layer channel arrangement. The device was charged with acetone and tested at a heat input of 95 W within a spin-table centrifuge. It was found that the heat pipe operated and performed near-independent of the investigated hypergravity loading up to 10 g. Results show that at ten times the acceleration due to gravity (10 g), the effective thermal conductivity was almost constant and even slightly increased which is very different from a conventional heat pipe. The gravity-independent heat transfer performance provides a unique feature of OHPs.

Experimental Investigation of Ultrasonic Effect on an Acetone Oscillating Heat Pipe

2013 ◽  
Author(s):  
Nannan Zhao ◽  
Benwei Fu ◽  
Dianli Zhao ◽  
Hongbin Ma
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Transfer Performance ◽  
Power Input ◽  
Input Power ◽  
Transfer Performance ◽  
Oscillating Heat Pipe ◽  
Ultrasonic Effect ◽  
Ultrasonic Sound ◽  
Oscillating Motion

The ultrasonic effect on the oscillating motion and heat transfer in an oscillating heat pipe (OHP) containing acetone was investigated experimentally. The ultrasonic sound was applied to the evaporating section of the OHP by using electrically-controlled piezoelectric ceramics. The ultrasonic sound is used to generate and maintain the oscillating motion, and, thereby, heat transfer is enhanced. The heat pipe was tested with or without the ultrasonic sound. In addition, the effects of heat load, filling ratio, orientation, operating temperature, and input power from 15 W to 200 W were investigated. The experimental results demonstrate that ultrasonic sound can affect the oscillating motions and enhance the heat transfer performance of the acetone OHP. In particular, the application of the ultrasonic sound on an acetone OHP can significantly reduce the thermal resistance of the acetone OHP and enhance the heat transfer performance in a low power input region. The investigation will provide an insight into the oscillating mechanism of the acetone OHP influenced by ultrasonic sound and provide a new way to enhance the heat transfer performance of the OHP.

Experimental Study on Oscillating Heat Pipe With Hydraulic Diameter Far Exceeding the Maximum Hydraulic Diameter

2019 ◽  
Author(s):  
Lilin Chu ◽  
Yulong Ji ◽  
Chunrong Yu ◽  
Yantao Li ◽  
Hongbin Ma ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Transfer Performance ◽  
Hydraulic Diameter ◽  
Working Fluid ◽  
Transfer Performance ◽  
Vertical Orientation ◽  
Oscillating Heat Pipe ◽  
Horizontal Orientation ◽  
Small Bubbles

Abstract In order to understand the heat transfer performance, startup and fluid flow condition of oscillating heat pipe (OHP) with hydraulic diameter far exceeding the maximum hydraulic diameter (MHD), an experimental investigation on heat transfer performance and visualization was conducted. From the experimental performance, it is found that the OHP can still work well with ethanol as the working fluid when the tube diameter has exceeded the MHD of 91.6%. In addition, the detailed flow patterns of the OHP were recorded by a highspeed camera for vertical and horizontal orientation to understand its physical mechanism. In the vertical orientation, initially working fluid generates small bubbles, and then the small bubbles coalesce and grow to vapor plugs, the vapor plugs finally pushes the liquid slugs to oscillate in the tube. In the horizontal orientation, the working fluid surface fluctuates due to the vapors flow from the evaporator to the condenser and bubbles burst in the evaporator. When the peak of liquid wave reaches the upper surface of tube, a liquid slug has been formed, and then the steam flow pushes the liquid slugs to oscillate in the tube.

Experimental Investigation of Oscillating Heat Pipe With Hybrid Fluids of Liquid Metal and Water

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Tingting Hao ◽  
Hongbin Ma ◽  
Xuehu Ma
Keyword(s):  
Heat Transfer ◽  
Liquid Metal ◽  
Heat Pipe ◽  
Heat Input ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
Experimental Results ◽  
Working Fluid ◽  
Transfer Performance ◽  
Oscillating Heat Pipe

A new oscillating heat pipe (OHP) charged with hybrid fluids can improve thermal performance. The key difference in this OHP is that it uses room temperature liquid metal (Galinstan consisting of gallium, indium, and tin) and water as the working fluid. The OHP was fabricated on a copper plate with six turns and a 3 × 3 mm2 cross section. The OHP with hybrid fluids as the working fluid was investigated through visual observation and thermal measurement. Liquid metal was successfully driven to flow through the OHP by the pressure difference between the evaporator and the condenser without external force. Experimental results show that while added liquid metal can increase the heat transport capability, liquid metal oscillation amplitude decreases as the filling ratio of liquid metal increases. Visualization of experimental results show that liquid metal oscillation position and velocity increase as the heat input increases. Oscillating motion of liquid metal in the OHP significantly increases the heat transfer performance at high heat input. The lowest thermal resistance of 0.076 °C/W was achieved in the hybrid fluids-filled OHP with a heat input of 420 W. We experimentally demonstrated a 13% higher heat transfer performance using liquid metal as the working fluid compared to an OHP charged with pure water.

An Experimental Investigation of Three-Dimensional Flat-Plate Oscillating Heat Pipe

2009 ◽  
Author(s):  
Scott M. Thompson ◽  
Hongbin Ma ◽  
Robert A. Winholtz ◽  
Corey Wilson
Keyword(s):  
Experimental Investigation ◽  
Flat Plate ◽  
Heat Pipe ◽  
Three Dimensional ◽  
Neutron Imaging ◽  
Heat Fluxes ◽  
Working Fluid ◽  
Oscillating Heat Pipe ◽  
Oscillatory Pattern ◽  
Thermal Oscillations

An experimental investigation on the effects of condenser temperatures, heating modes and heat inputs on a miniature, three dimensional flat-plate oscillating heat pipe (3D FP-OHP) was conducted visually and thermally. The 3D FP-OHP was charged with acetone at a filling ratio of 0.80, had dimensions of 101.60 × 63.50 × 2.54 mm3, possessed 30 total turns, and had square channels on both sides of the device with a hydraulic diameter of 0.762 mm. Unlike traditional flat-plate designs, this new three-dimensional, compact design allows for multiple heating arrangements and higher heat fluxes. Transient and steady-state temperature measurements were collected at various heat inputs and the activation/start-up was clearly observed for both bottom and side heating modes during reception of its excitation power for this miniature 3D FP-OHP. The neutron imaging technology was simultaneously employed to observe the internal working fluid flow for all tests directly through the heat pipe’s copper wall. The activation was accompanied with a pronounced temperature field relaxation and the onset of chaotic thermal oscillations — all occurring with the same general oscillatory pattern at locations all around the 3D FP-OHP. Qualitative and quantitative analysis of these thermal oscillations, along with the presentation of the average temperature difference and thermal resistance, for all experimental conditions are provided. The novelty of the three-dimensional OHP design is its ability to still produce the oscillating motions of liquid plugs and vapor bubbles and, more importantly, its ability to remove higher heat fluxes.

Sign in / Sign up

Export Citation Format

Share Document