An Experimental Study on Electrosparking of Tool Electrode Forced Cooling Based on Micro Heat Pipe Bundle

An electrosparking experiment of ASP30 powder metallurgical steel was carried out through tool electrode forced cooling based on micro heat pipe bundle by using the semiconductor encapsulation mould. Results demonstrate that the micro groove formed among sintered copper fibers based on wick of micro heat pipe and the unique composite structure of the surface chopped morphology can not only increase capillary pressure of the wick, but also strengthen evaporation/condensation process at two ends of the micro heat pipe, and improve cooling effect of micro heat pipe to tool electrode significantly. Compared with traditional electrosparking, electrosparking of tool electrode forced cooling based on micro heat pipe bundle increases the inter-electrode cooling, chip removal and deionization of electrosparking and further lowers tool electrode loss by strengthening heat dissipation of tool electrode. Hence, it can improve stability of electrosparking, increase pulse utilization and increase the processing speed and processing surface quality significantly.

Study and Computer-aided Design of Flux-cored Wire Rolling in Round Gauges

The mathematical model of the stress-strain state during flux-cored wire rolling in round gauges has been developed. Simulation was based on dividing the deformation zone into elementary volumes and simultaneous solution of the plasticity condition for porous materials and power static equilibrium equation inside the elementary volume. A distinctive feature of this model is taking into account the porous medium strain in the deformation zone. The experiments have confirmed the validity of the mathematical model for predicting the powder density and the energy-power characteristics of the process. Based on the developed mathematical model, the criteria and conditions for optimization were formulated, and the algorithm was developed for the automated design of technology for flux-cored wire rolling in round gauges. As an example of the obtained solutions implementation, the calculation of sintered copper flux-cored wire rolling technology was given.