Numerical Modeling for the Energy Conversion and Thermal Transmission Accompanying the Process of Oily Cuttings Agitation

2016 ◽  
Author(s):  
Zhipeng Sun ◽  
Hongwu Zhu ◽  
Jian Hua
Keyword(s):  
Heat Transfer ◽  
Energy Conversion ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Solid Phase ◽  
Conductive Heat ◽  
Heat Transmission ◽  
Gas Reservoirs ◽  
Coupling Approach ◽  
Solid Motion

As a kind of unconventional gas reservoirs, shale gas reservoirs are full of potential to develop and have attracted global attention. Accompanying the exploiting of shale gas, a large amount of drilling cuttings contaminated by the oil-based drilling fluid are generated inevitably. How to deal with the drilling cuttings in a environmental-friendly way is tough especially for offshore oilfield. So it is important to investigate this aspect deeply and develop methods to clean the contaminated drilling cuttings. As is known to all, the thermal desorption technology has outstanding performance in oily cuttings cleaning. This paper bases on a kind of mechanical-thermal cuttings cleaning apparatus where the contaminated drilling cuttings are heated up by friction heat produced by the friction between the cuttings and the agitating vanes. And the harmful substance is separated from the cuttings in the agitated and high temperature flow field. This thesis investigates the fundamental of the energy conversion in the frictional process, infer formulas analyzing the thermo-physical phenomena and quantitatively model the energy conversion and thermal transmission accompanying the friction. Firstly, the principle of heat transfer and the law of conservation of energy are employed to investigate the natural law of the energy conversion in the frictional process. Based on the investigation, taking the liquid bridge between the oily cuttings and the agitating vane into account, this paper deduces the physical equations and the frictional energy model to calculate the total frictional heat, heat density and temperature distribution. Following up the frictional model, in the Eulerian-Lagrangian coupling framework, this paper develops a parallel numerical platform of computational fluid dynamics combined with discrete element method (CFD-DEM). In the coupling approach, the gas motion is solved at the computational grid level while the solid motion is resolved at the particle-scale level. Furthermore, the coupling approach is extended with the frictional energy model. The numerical platform can calculate the dense gas-solid motion in the fluidizing apparatus, the convective heat transfer between gas and solid phase, and the conductive heat transfer between particles. Based on the platform, the mechanical-thermal energy conversion and the convective heat transfer between gas and oily cuttings, and the conductive heat transfer between cuttings and the agitating vanes are investigated. Meanwhile an experiment is conducted. By comparing the numerical results with the experiment data, the paper can come to the conclusion that how to dispose the nonlinear parameters such as the friction contact area, the friction coefficient and the normal pressure is the key to accurately model the energy conversion and the heat transmission. What’s more, it can be understood that the convective heat transfer between gas and solid phase play an important role in the heat transmission.

The Effect of Thermal Wall Properties on Natural Convection in Inclined Rectangular Cells

1982 ◽  
Vol 104 (1) ◽  
pp. 111-117 ◽  
Author(s):  
B. A. Meyer ◽  
J. W. Mitchell ◽  
M. M. El-Wakil
Keyword(s):  
Heat Transfer ◽  
Cell Wall ◽  
Natural Convection ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Conductive Heat ◽  
Numerical Work ◽  
Aspect Ratios ◽  
Convection Problem ◽  
Natural Convection Problem

The effects of cell wall thickness and thermal conductivity on natural convective heat transfer within inclined rectangular cells was studied. The cell walls are thin, and the hot and cold surfaces are isothermal. The two-dimensional natural convection problem was solved using finite difference techniques. The parameters studied were cell aspect ratios (A) of 0.5 and 1, Rayleigh numbers (Ra) up to 105, a Prandtl number (Pr) of 0.72 and a tilt angle (φ) of 60 deg. These parameters are of interest in solar collectors. The numerical results are substantiated by experimental results. It was found that convection coefficients for cells with adiabatic walls are substantially higher than those for cells with conducting walls. Correlations are given for estimating the convective heat transfer across the cell and the conductive heat transfer across the cell wall. These correlations are compared with available experimental and numerical work of other authors.

Three-Dimensional Flow Effects on Convective Heat Transfer From a Window Covered by a Simple Plane Blind With No Top Covering

2006 ◽  
Author(s):  
Patrick H. Oosthuizen
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Approximate Model ◽  
Conductive Heat ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Flow Effects

Most studies of convective heat transfer in window-blind systems assume that the flow over the window-blind arrangement is two-dimensional. In some cases, however, three-dimensional flow effects can become important. The present study was undertaken to determine how significant such effects can be for the particular case of a window covered by a simple plane blind. Only convective heat transfer has been considered. The situation considered is only an approximate model of the real window-blind situation. The window is represented by a rectangular vertical isothermal wall section embedded in a large vertical adiabatic plane wall surface and exposed to a large surrounding "room" in which the temperature is lower than the window temperature. The plane blind is represented by a thin vertical wall having the same size as the "window" which offers no resistance to heat transfer across it and in which conductive heat transfer is negligible. The gaps between the blind and the window at the sides and at the top of the window-blind system are assumed to be open. The flow has been assumed to be laminar and it has been assumed that the fluid properties are constant except for the density change with temperature which gives rise to the buoyancy forces. The solution has been obtained by numerically solving the three-dimensional governing equations written in dimensionless form. The effects of the dimensionless governing variables on the window Nusselt number have been numerically examined.

Effect of Variable Properties and Radiation on Convective Heat Transfer Measurements at Engine Conditions

2016 ◽  
Vol 138 (11) ◽  
Author(s):  
Nathan J. Greiner ◽  
Marc D. Polanka ◽  
James L. Rutledge ◽  
Andrew T. Shewhart
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Heat Flux ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Nonlinear Function ◽  
Turbine Engines ◽  
Conductive Heat ◽  
Variable Properties ◽  
Single Experiment

Convective heat transfer from a fluid to a surface is an approximately linear function of driving temperature if the properties within the boundary layer are approximately constant. However, in environments with large driving temperatures like those seen in the hot sections of gas turbine engines, significant property variations exist within the boundary layer. In addition, radiative heat transfer can be a significant contributor to the total heat transfer in a high-temperature environment such that it can not be neglected. As a result, heat transfer to the surface becomes a nonlinear function of driving temperature and the conventional linear heat flux assumption cannot be employed to characterize the convective heat transfer. The present study experimentally examines the nonlinearity of convective heat flux on a zero-pressure-gradient flat plate with large freestream to wall-temperature differences. In addition, the need to account for the radiative component of the overall heat transfer is highlighted. Finally, a method to account for the effects of both variable properties and radiation simultaneously is proposed and demonstrated. Overall, the proposed technique provides the means to quantify the independent contributions of radiative and variable property convective heat transfer to the total conductive heat transfer to or from a surface in a single experiment.

A Theoretical Study of the Effects of Cooling on Thermoelastic Contact Instabilities

1977 ◽  
Vol 99 (2) ◽  
pp. 247-253 ◽  
Author(s):  
S. R. Heckmann ◽  
R. A. Burton
Keyword(s):  
Heat Transfer ◽  
Flat Plate ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Theoretical Study ◽  
Conductive Heat ◽  
Two Dimensional ◽  
Thermoelastic Instability ◽  
Cooling Effects ◽  
Plate Geometry

The effects of cooling on thermoelastic instability are delineated for a two dimensional flat plate geometry. The analysis includes conductive heat transfer from the edge of the flat plate as well as convective heat transfer from its sides. Cooling is found to be characterized by two dimensionless parameters allowing a direct comparison between these results and previous results where cooling was ignored. An immediate assessment can be made concerning the significance of cooling, and if cooling effects need be included in the design analysis.

Heat Transfer Enhancement With Iron Oxide Nanoparticle Based Ferrofluids

2013 ◽  
Author(s):  
Evrim Kurtoglu ◽  
Alihan Kaya ◽  
Devrim Gözüaçık ◽  
Havva Funda Yağcı Acar ◽  
Ali Kosar
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Solid Phase ◽  
Particle Diameter ◽  
Intermolecular Forces ◽  
Heat Fluxes ◽  
Outer Diameter ◽  
Average Particle ◽  
Wide Range

Nanofluids are colloidal compounds, where the solid phase material is composed of nano sized particles, and the liquid phase can potentially be any fluid but aqueous media are common. As a common nanofluid type, ferrofluids are formed by holding solid nanoparticles in suspension by weak intermolecular forces and may be produced from materials with different magnetic properties. Heat transfer performance of ferrofluids is one of the crucial properties among many others that should be analyzed and considered for their wide range of applications. For this purpose, experiments were conducted in order to characterize heat transfer properties of ironoxide based ferrofluids flowing through a microchannel. In this study, convective heat transfer experiments were conducted in order to characterize convective heat transfer enhancements with Lauric acid coated ironoxide (Fe3O4) nanoparticle based ferrofluids, which have volumetric fractions between 0%–∼5% and average particle diameter of 25 nm, in a 2.5 cm long hypodermic stainless steel microtube with an inner diameter of 514 μm and an outer diameter of 819 μm. Heat fluxes up to 184 W/cm2 were applied to the system at three different flow rates (1ml/s, 0.62ml/s and 0.36 ml/s). Promising results were obtained from this study, which are suggesting the use of ferrofluids for heat transfer applications can be advantageous.

Sign in / Sign up

Export Citation Format

Share Document