Bridging Precipitate Microstructure and Mechanical Hardness of Nickel-Based Superalloy Through Artificial Neural Network Model

2020 ◽  
Author(s):  
Yangping Li ◽  
Yangyi Liu ◽  
Sihua Luo ◽  
Zi Wang ◽  
Ke Wang ◽  
...  
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Cooling Rate ◽  
Volume Fraction ◽  
Sem Images ◽  
Mechanical Hardness ◽  
Nickel Based Superalloy ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Abstract The attractive mechanical properties of nickel-based superalloys primarily arise from an assembly of γ′ precipitates with desirable size, volume fraction, morphology and spatial distribution. In addition, the solutioning cooling rate after super solvus heat treatment is critical for controlling the features of γ′ precipitates. However, the correlation between these multidimensional parameters and mechanical hardness has not been well established to date. Scanning electron microscope (SEM) images with different γ′ precipitates were investigated in this study, and artificial neural network (ANN) method was used to build a microstructure-mechanical property model. The critical step in this work is to extract different microstructural features from hundreds of SEM images. In order to improve the accuracy of prediction, the cooling rate was also considered as the input. In this work, the methodology was proved to be capable of bridging microstructural features and mechanical properties under the inspiration of material genome spirit.

A Model on the Correlation between Composition and Mechanical Properties of Mg-Al-Zn Alloys by Using Artificial Neural Network

2005 ◽  
Vol 488-489 ◽  
pp. 793-796 ◽  
Author(s):  
Hai Ding Liu ◽  
Ai Tao Tang ◽  
Fu Sheng Pan ◽  
Ru Lin Zuo ◽  
Ling Yun Wang
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Magnesium Alloys ◽  
Tensile Yield Strength ◽  
Data Set ◽  
The Neural Network ◽  
Artificial Neural ◽  
Prediction Of Mechanical Properties ◽  
Artificial Neural Network Ann

A model was developed for the analysis and prediction of correlation between composition and mechanical properties of Mg-Al-Zn (AZ) magnesium alloys by applying artificial neural network (ANN). The input parameters of the neural network (NN) are alloy composition. The outputs of the NN model are important mechanical properties, including ultimate tensile strength, tensile yield strength and elongation. The model is based on multilayer feedforward neural network. The NN was trained with comprehensive data set collected from domestic and foreign literature. A very good performance of the neural network was achieved. The model can be used for the simulation and prediction of mechanical properties of AZ system magnesium alloys as functions of composition.

Prediction of Wear Behavior in Porous Sintered Steels: Artificial Neural Network Approach

2018 ◽  
Vol 18 (2) ◽  
pp. 111-115
Author(s):  
Hassan Abdoos ◽  
Ahmad Tayebi ◽  
Meysam Bayat
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Wear Resistance ◽  
Wear Behavior ◽  
Affecting Factors ◽  
Neural Network Approach ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Comparison Of The Results

Abstract Due to the increasing usage of powder metallurgy (PM), there is a demand to evaluate and improve the mechanical properties of PM parts. One of the most important mechanical properties is wear behavior, especially in parts that are in contact with each other. Therefore, the choice of materials and select manufacturing parameters are very important to achieve proper wear behavior. So, prediction of wear resistance is important in PM parts. In this paper, we try to investigate and predict the wear resistance (volume loss) of PM porous steels according to the affecting factors such as: density, force and sliding distance by artificial neural network (ANN). ANN training was done by a multilayer perceptron procedure. The comparison of the results estimated by the ANN with the experimental data shows their proper matching. This issue confirms the efficiency of using method for prediction of wear resistance in PM steel parts.

Improving the Mechanical Properties of Wire-Rope Silk Scaffold by Artificial Neural Network in Tendon and Ligament Tissue Engineering

2015 ◽  
Vol 10 (3) ◽  
pp. 155892501501000 ◽  
Author(s):  
Elham Naghashzargar ◽  
Dariush Semnani ◽  
Saeed Karbasi
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Back Propagation ◽  
Wire Rope ◽  
Elongation At Break ◽  
Input Parameters ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Silk Yarn

Finding an appropriate model to assess and evaluate mechanical properties in tissue engineered scaffolds is a challenging issue. In this research, a structurally based model was applied to analyze the mechanics of engineered tendon and ligament. Major attempts were made to find the optimum mechanical properties of silk wire-rope scaffold by using the back propagation artificial neural network (ANN) method. Different samples of wire-rope scaffolds were fabricated according to Taguchi experimental design. The number of filaments and twist in each layer of the four layered wire-rope silk yarn were considered as the input parameters in the model. The output parameters included the mechanical properties which consisted of UTS, elongation at break, and stiffness. Finally, sensitivity analysis on input data showed that the number of filaments and the number of twists in the fourth layer are less important than other input parameters.

scholarly journals ARTIFICIAL NEURAL NETWORK IN THE MODELLING OF THE EFFECT OF CHROMIUM DOPANTS ON THE MECHANICAL PROPERTIES OF AL-4%CU ALLOY

2019 ◽  
Vol 25 (1) ◽  
Author(s):  
EMAGBETERE EYERE ◽  
PETER ARUOTURE OGHENEKOWHO ◽  
IFEANYI ASHIEDU FESTUS
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Percentage Elongation ◽  
Cu Alloy ◽  
Simulation Results ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Experimental Values ◽  
Strong Agreement

Artificial Neural Network (ANN) was used to model the effect of Chromium dopants on the mechanical properties duralumin (Al-4 %Cu). The results showed that the hardness, yield strength, and ultimate tensile strength increased, while the energy absorbed and percentage elongation decreased, with increasing %wt of Chromium dopants. Simulation results of ANN show strong agreement with experimental values, having satisfactory R-values of Mean Square Error. ANN can suitably be used to predict the mechanical properties of Al-4%Cu doped with Chromium.

scholarly journals ARTIFICIAL NEURAL NETWORK IN THE MODELLING OF THE EFFECT OF CHROMIUM DOPANTS ON THE MECHANICAL PROPERTIES OF AL-4%CU ALLOY

2019 ◽  
Vol 25 (1) ◽  
pp. 16-24
Author(s):  
EYERE EMAGBETERE ◽  
OGHENEKOWHO PETER ARUOTURE ◽  
FESTUS IFEANYI ASHIEDU
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Percentage Elongation ◽  
Cu Alloy ◽  
Simulation Results ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Experimental Values ◽  
Strong Agreement

Artificial Neural Network (ANN) was used to model the effect of Chromium dopants on the mechanical properties duralumin (Al-4 %Cu). The results showed that the hardness, yield strength, and ultimate tensile strength increased, while the energy absorbed and percentage elongation decreased, with increasing %wt of Chromium dopants. Simulation results of ANN show strong agreement with experimental values, having satisfactory R-values of Mean Square Error. ANN can suitably be used to predict the mechanical properties of Al-4%Cu doped with Chromium.

scholarly journals Prediction of mechanical strength of polypropylene fibre reinforced concrete using artificial neural network

2020 ◽  
Vol 63 (4) ◽  
pp. 79-86
Author(s):  
P. Sangeetha ◽  
M. Shanmugapriya
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Reinforced Concrete ◽  
Offshore Structures ◽  
Polypropylene Fibre ◽  
Fibre Reinforced Concrete ◽  
Curing Period ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The usefulness of fibre reinforced concrete (FRC) in various civil engineering applications is indisputable. Fibre reinforced concrete has been successfully used so far in construction of structures like bridges, industrial structures, concrete, architectural panels, precast products, offshore structures and many other applications. This paper presents the study on the mechanical properties of the polypropylene fibre reinforced concrete. The parameters varied in the study include volume of fibre (0%, 0.5%, 1.0%, 1.5% & 2.0%) and the curing period (7 days and 14 days). From the study it is concluded that the further increases in the volume of fibre reduces the water cement ratio. The mechanical properties of the polypropylene fibre reinforced concrete were also predicted by using Artificial Neural Network (ANN) and found to have minimal error when compared to actual experimental results.

An Artificial Neural Network Model to Predict Material Characteristics From the Results of Miniature Disk Bending Tests

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
A. K. Ghosh ◽  
Vishnu Verma ◽  
G. Behera
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Inverse Problem ◽  
Artificial Neural Network ◽  
Material Properties ◽  
Artificial Neural Network Model ◽  
Large Database ◽  
Bending Tests ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The inverse problem of evaluating mechanical properties of material from the observed values of load and deflection of a miniature disk bending specimen is discussed in this paper. It involves analysis of large amplitude, elasto-plastic deformation considering contact and friction. The approach in this work is to first generate—by a finite element (FE) solution—a large database of load-displacement (P-w) records for varying material properties. An artificial neural network (ANN) is trained with some of these data. The errors in the various values of the parameters during testing with additional known data were found to be reasonably small.

Sign in / Sign up

Export Citation Format

Share Document