Three-Dimensional Simulation of Bubble Behavior and Mass Transfer for CO2 Absorption in Nanoabsorbents

2019 ◽  
Author(s):  
Lirong Li ◽  
Yong Tae Kang
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Three Dimensional ◽  
Particle Method ◽  
Liquid System ◽  
Al2o3 Nanoparticles ◽  
Co2 Absorption ◽  
Gas Bubble ◽  
Surface Renewal

Abstract CO2 absorption performance in gas-liquid system is affected by nanoparticles. The enhancement mechanisms involved have been extensively paid attention. The CO2 gas bubble behaviors and the characteristics of the nanoparticle motion have been clarified in the present study. The equivalent substitution method is used to regard the liquid with nanoparticles as a continuous term with changed physical properties, that is, nanofluid. Therefore, the volume-of-fluid (VOF) method is employed to well predict the gas bubble behaviors and mass transfer coefficient in nanofluid. It is found that the mass transfer coefficient in the gas-liquid system for CO2 absorption can be significantly enhanced by Al2O3 nanoparticles. With the increase of nanoparticles volume concentration, the surface renewal frequency increases dramatically. The discrete-particle-method (DPM) is adopted to track the motion of nanoparticles. In this way, the deformation of the bubbles and the motion of the nanoparticle are well captured. It is concluded that the enhanced mass transfer coefficient in gas-liquid-nanoparticle system is not only related to the Brownian motion of the particles, but also related to the nanoparticle deduced turbulence in the liquid field.

scholarly journals Hydrodynamics and Mass Transfer in a Concentric Internal Jet-Loop Airlift Bioreactor Equipped with a Deflector

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4329
Author(s):  
Radek Šulc ◽  
Jan Dymák
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Liquid System ◽  
Gas Holdup ◽  
Gas Velocity ◽  
Liquid Phase Mass Transfer ◽  
Homogenization Time ◽  
Standard Design ◽  
Superficial Gas Velocity

The gas–liquid hydrodynamics and mass transfer were studied in a concentric tube internal jet-loop airlift reactor with a conical bottom. Comparing with a standard design, the gas separator was equipped with an adjustable deflector placed above the riser. The effect of riser superficial gas velocity uSGR on the total gas holdup εGT, homogenization time tH, and overall volumetric liquid-phase mass transfer coefficient kLa was investigated in a laboratory bioreactor, of 300 mm in inner diameter, in a two-phase air–water system and three-phase air–water–PVC–particle system with the volumetric solid fraction of 1% for various deflector clearances. The airlift was operated in the range of riser superficial gas velocity from 0.011 to 0.045 m/s. For the gas–liquid system, when reducing the deflector clearance, the total gas holdup decreased, the homogenization time increased twice compared to the highest deflector clearance tested, and the overall volumetric mass transfer coefficient slightly increased by 10–17%. The presence of a solid phase shortened the homogenization time, especially for lower uSGR and deflector clearance, and reduced the mass transfer coefficient by 15–35%. Compared to the gas–liquid system, the noticeable effect of deflector clearance was found for the kLa coefficient, which was found approx. 20–29% higher for the lowest tested deflector clearance.

Mass Transfer Enhancement for CO2 Absorption in Structured Packed Absorption Column

2019 ◽  
Vol 41 (5) ◽  
pp. 820-820
Author(s):  
Pongayi Ponnusamy Selvi and Rajoo Baskar Pongayi Ponnusamy Selvi and Rajoo Baskar
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Gas Flow ◽  
Aqueous Ammonia ◽  
Volume Flow Rate ◽  
Packed Column ◽  
Operating Conditions ◽  
Co2 Absorption ◽  
Absorption Column

The acidic gas, Carbon dioxide (CO2) absorption in aqueous ammonia solvent was carried as an example for industrial gaseous treatment. The packed column was provided with a novel structured BX-DX packing material. The overall mass transfer coefficient was calculated from the absorption efficiency of the various runs. Due to the high solubility of CO2, mass transfer was shown to be mainly controlled by gas side transfer rates. The effects of different operating parameters on KGav including CO2 partial pressure, total gas flow rates, volume flow rate of aqueous ammonia solution, aqueous ammonia concentration, and reaction temperature were investigated. For a particular system and operating conditions structured packing provides higher mass transfer coefficient than that of commercial random packing.

Effect of bubble contamination on gas–liquid mass transfer coefficient on CO2 absorption in amine solutions

2008 ◽  
Vol 137 (2) ◽  
pp. 422-427 ◽  
Author(s):  
Rocío Maceiras ◽  
Sebastião S. Alves ◽  
M. Ángeles Cancela ◽  
Estrella Álvarez
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Co2 Absorption ◽  
Liquid Mass ◽  
Liquid Mass Transfer ◽  
Amine Solutions

scholarly journals Overall Mass Transfer Coefficient of CO2 Absorption in a Diameter-varying Spray Tower

2017 ◽  
Vol 114 ◽  
pp. 1665-1670 ◽  
Author(s):  
Xiaomei Wu ◽  
Min He ◽  
Yunsong Yu ◽  
Zhen Qin ◽  
Zaoxiao Zhang
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Co2 Absorption ◽  
Spray Tower ◽  
Overall Mass Transfer Coefficient

scholarly journals Mass Transfer Performance Study for CO2 Absorption into Non-Precipitated Potassium Carbonate Promoted with Glycine Using Packed Absorption Column

2020 ◽  
Vol 12 (9) ◽  
pp. 3873
Author(s):  
Nur Farhana Ajua Mustafa ◽  
Azmi Mohd Shariff ◽  
Wee Horng Tay ◽  
Hairul Nazirah Abdul Halim ◽  
Siti Munirah Mhd Yusof
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Removal Efficiency ◽  
Potassium Carbonate ◽  
Elevated Pressure ◽  
Co2 Removal ◽  
Co2 Absorption ◽  
Absorption Column ◽  
Co2 Removal Efficiency

The removal of carbon dioxide (CO2) at offshore operation requires an absorption system with an environmentally friendly solvent that can operate at elevated pressure. Potassium carbonate promoted with glycine, PCGLY, is a green solvent that has potential for offshore applications. For high solvent concentrations at elevated pressure, the by-product of CO2 absorption consists of precipitates that increase operational difficulty. Therefore, this study was done to assess the CO2 absorption performance of non-precipitated PCGLY with concentration 15wt%PC+3wt%GLY, which is known to have comparable solubility performance with MDEA. A packed absorption column was used to identify the CO2 removal efficiency, mass transfer coefficient in liquid film, k l a e , and overall volumetric mass transfer coefficient, K G a v . A simplified rate-based model was used to determine k l a e and K G a v based on the experimental data with a maximum MAE value, 0.057. The results showed that liquid flow rates and liquid temperature gives significant effects on the k l a e and K G a v profile, whereas gas flow rate and operating pressure had little effect. The CO2 removal efficiency of PCGLY was found to be 77%, which was only 2% lower than 1.2 kmol/m3 MDEA. K G a v of PCGLY is comparable with MDEA. The absorption process using PCGLY shows potential in the CO2 sweetening process at offshore.

Sign in / Sign up

Export Citation Format

Share Document