Incrementally Formed Stiffeners Effect on the Reduction of Springback in 2024-T3 Aluminum After Single Point Incremental Forming

2015 ◽  
Author(s):  
Brandt J. Ruszkiewicz ◽  
Sean S. Dodds ◽  
Zachary C. Reese ◽  
John T. Roth ◽  
Ihab Ragai
Keyword(s):  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Stress Concentrations ◽  
Forming Process ◽  
Step Size ◽  
New Process ◽  
Geomagic Software ◽  
Truncated Pyramid ◽  
The Ideal

Single Point Incremental Forming (SPIF) is a relatively new process to form sheet metal. SPIF utilizes machines such as CNC’s and mills to form a part by making several spiraled passes, deforming the metal a certain distance, known as the step-size, with each pass. One major issue with this process is global springback. Once the metal is removed from its clamping fixture, the residual stresses that resulted from the forming process cause the material to springback. The purpose of this paper is to demonstrate how incrementally forming a stiffener on the outside of the desired geometry will manipulate the stress concentrations in the metal, and effectively reduce the amount of global springback that occurs after the specimen is unclamped from its fixture. For these tests, stiffeners were formed on the outside of a truncated pyramid; the material used for these test was 2024-T3 aluminum. After the work pieces were removed from their clamping fixtures, the amount of springback that they experienced was examined using Geomagic software to determine the ideal stiffener parameters for reducing global springback for a truncated pyramid in 2024-T3 aluminum.

Single Point Incremental Forming Springback Reduction Using Edge Stiffener

2020 ◽  
Author(s):  
Tyler J. Grimm ◽  
Gowtham V. Parvathy ◽  
Laine Mears
Keyword(s):  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Back Side ◽  
Forming Process ◽  
Step Size ◽  
Elastic Deformations ◽  
Form Complex ◽  
Large Step ◽  
Large Step Size

Abstract Single point incremental forming (SPIF) is a dieless forming process which uses local deformations to form complex geometries. This is achieved through the use of a typically hemispherical tipped forming tool. Several variations of SPIF have been developed to improve the performance of this process. This includes the use of a partial die which is placed on the back-side of the material. The forming tool is then able to press the material into this partial die. Another method is to utilize a clamping fixture with a periphery that closely matches that of the desired geometry. While both of these methods improve the performance of SPIF, they also require dedicated fixturing. While these modifications still present an advantage over traditional stamping, it is desirable to avoid the use of any geometry-specific equipment. Springback is a significant issue when performing traditional SPIF. Springback can occur in two different ways: local and global. Local springback results from the elastic deformations created outside the region located directly beneath the forming tool. This causes poor accuracy as a result. Compensation methods have been developed to overcome this type of springback but are faced with certain limitations. Global springback refers to the springback experienced once the material is removed from its clamping fixture. This springback is a result of all residual stresses produced during forming. This springback is much more difficult to reduce and often requires annealing the workpiece subsequent to forming. A toolpath approach is explored herein as a method to reduce springback without the use of geometry-specific equipment. The toolpath developed begins at the edge of the clamping fixture, regardless of the geometry shape, and forms the flashing material prior to the desired geometry. By starting the toolpath along the edge of the fixture, elastic deformations are minimized. Additionally, the work hardening produced during this forming acts as a stiffener for the desired geometry, which behaves as a frame which matches the periphery of the desired geometry. This method was experimentally tested for its accuracy improvements when forming a truncated pyramid from 5052 aluminum. The angle of this stiffener, the step size of the stiffener, and the size of the desired geometry were varied. The fixture dimensions were held constant. This method was found to reduce the overall springback of the part and increase the accuracy of the resulting geometry. Furthermore, it was found that a large step size can be used to form the stiffener section of the part. By using a large step size, the time it takes to form this sacrificial region is minimized.

scholarly journals Formability and Failure Evaluation of AA3003-H18 Sheets in Single-Point Incremental Forming Process through the Design of Experiments

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 808
Author(s):  
Mohanraj Murugesan ◽  
Dong Won Jung
Keyword(s):  
Design Of Experiments ◽  
Incremental Forming ◽  
Single Point ◽  
Al Alloy ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Step Size ◽  
Response Variable ◽  
Test Conditions ◽  
Grey Relational

The single-point incremental forming process (SPIF) is one of the emerging manufacturing methods because of its flexibility in producing the desired complex shapes with higher formability at low-cost compared to traditional sheet forming methods. In this research work, we experimentally investigate the forming process to determine the influence of process parameters and their contribution to enhancing the formability without causing a fracture by combining the design of experiments (DOE), grey relational analysis (GRA), and statistical analysis of variance (ANOVA). The surface morphology and the energy dispersive X-ray spectroscopy (EDS) method are used to perform elemental analysis and examine the formed parts during three forming stages. The DOE procedure, a central composite design with a face-centered option, is devised for AA3003-H18 Al alloy sheet for modeling the real-time experiments. The response surface methodology (RSM) approach is adopted to optimize the forming parameters and recognize the optimal test conditions. The statistically developed model is found to have agree with the test measurements. The prediction model’s capability in R2 is computed as 0.8931, indicating that the fitted regression model adequately aligns with the estimated grey relational grade (GRG) data. Other statistical parameters, such as root mean square error (RMSE) and average absolute relative error (AARE), are estimated as 0.0196 and 2.78%, respectively, proving the proposed regression model’s overall closeness to the measured data. In addition, the prediction error range is identified as −0.05 to 0.05, which is significantly lower and the residual data are distributed normally in the design space with variance and mean of 3.3748 and −0.1232, respectively. ANOVA is performed to understand the adequacy of the proposed model and the influence of the input factors on the response variable. The model parameters, including step size, feed rate, interaction effect of tool radius and step size, favorably influence the response variable. The model terms X2 (0.020 and 11.30), X3 (0.018 and 12.16), and X1X2 (0.026 and 9.72) are significant in terms of p-value and F-value, respectively. The microstructural inspection shows that the thinning behavior tends to be higher as forming depth advances to its maximum; the deformation is uniform and homogeneous under the predefined test conditions.

Application of Response Surface Analysis and Genetic Algorithm for the Optimization of Single Point Incremental Forming Process

2013 ◽  
Vol 554-557 ◽  
pp. 1265-1272 ◽  
Author(s):  
Riadh Bahloul ◽  
Henia Arfa ◽  
Hedi Belhadj Salah
Keyword(s):  
Response Surface ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Step Size ◽  
Unknown Parameters ◽  
Forming Parameters ◽  
Tool Diameter ◽  
Incremental Step

Single point incremental forming (SPIF) is a modern method of forming sheet metal, where parts can be formed without the use of dedicated dies. The ability of SPIF to form a part is based on various forming parameters. Previous work was not accomplished with the help of design of experiments (DOE), thus reducing the number of parameters varied at any time. This paper presents a Box-Behnken experimental design, which develops the numerical plan, formalizes the forming parameters critical in SPIF and analyse data. The most critical factors affecting SPIF were found to be wall inclination angle, incremental step size, material thickness and tool size. The main effects of these parameters on the quality of the formed parts were studied in detail. Actually this work aims to “optimize the thinning rate and the maximum force by considering the tool diameter and the vertical pitch as unknown parameters for two different wall angles and thicknesses”. To this purpose, an optimization procedure based on the use of response surface methodology (RSM) and genetic algorithms (GA) have been proposed for application to find the optimum solutions. Finally, it demonstrated that the developed methods can solve high non-linear problems successfully. Associated plots are shown to be very efficient for a quick localization of the region of the search space containing the global optimum values of the SPIF parameters.

scholarly journals Study of Friction and Wear Effects in Aluminum Parts Manufactured via Single Point Incremental Forming Process Using Petroleum and Vegetable Oil-Based Lubricants

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3973
Author(s):  
José M. Diabb Zavala ◽  
Oscar Martínez-Romero ◽  
Alex Elías-Zúñiga ◽  
Héctor Manuel Leija Gutiérrez ◽  
Alejandro Estrada-de la Vega ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Process Parameters ◽  
Friction And Wear ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Step Size ◽  
Vertical Step ◽  
Stribeck Curves

This paper focuses on studying how mineral oil, sunflower, soybean, and corn lubricants influence friction and wear effects during the manufacturing of aluminum parts via the single point incremental forming (SPIF) process. To identify how friction, surface roughness, and wear change during the SPIF of aluminum parts, Stribeck curves were plotted as a function of the SPIF process parameters such as vertical step size, wall angle, and tool tip semi-spherical diameter. Furthermore, lubricant effects on the surface of the formed parts are examined by energy dispersive spectroscopy (EDS) and scanning electron microscope (SEM) images, the Alicona optical 3D measurement system, and Fourier-transform infrared spectroscopy (FTIR). Results show that during the SPIF process of the metallic specimens, soybean and corn oils attained the highest friction, along forces, roughness, and wear values. Based on the surface roughness measurements, it can be observed that soybean oil produces the worst surface roughness finish in the direction perpendicular to the tool passes (Ra =1.45 μm) considering a vertical step size of 0.25 mm with a 5 mm tool tip diameter. These findings are confirmed through plotting SPIFed Stribeck curves for the soybean and corn oils that show small hydrodynamic span regime changes for an increasing sample step-size forming process. This article elucidates the effects caused by mineral and vegetable oils on the surface of aluminum parts produced as a function of Single Point Incremental Sheet Forming process parameters.

Improve the Micro-hardness of Single Point Incremental Forming Product Using Magnetic Abrasive Finishing

2020 ◽  
Vol 38 (8A) ◽  
pp. 1137-1142
Author(s):  
Baqer A. Ahmed ◽  
Saad K. Shather ◽  
Wisam K. Hamdan
Keyword(s):  
Vickers Hardness ◽  
Feed Rate ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Step Size ◽  
Coil Current ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing

In this paper the Magnetic Abrasive Finishing (MAF) was utilized after Single Point Incremental Forming (SPIF) process as a combined finishing process. Firstly, the Single Point Incremental forming was form the truncated cone made from low carbon steel (1008-AISI) based on Z-level tool path then the magnetic abrasive finishing process was applied on the surface of the formed product. Box-Behnken design of experiment in Minitab 17 software was used in this study. The influences of different parameters (feed rate, machining step size, coil current and spindle speed) on change in Micro-Vickers hardness were studied. The maximum and minimum change in Micro-Vickers hardness that achieved from all the experiments were (40.4 and 1.1) respectively. The contribution percent of (feed rate, machining step size, coil current and spindle speed) were (7.1, 18.068, 17.376 and 37.894) % respectively. After MAF process all the micro surface cracks that generated on the workpiece surface was completely removed from the surface.

Geometry Compensation Methods for Increasing the Accuracy of the SPIF Process

2021 ◽  
Vol 883 ◽  
pp. 217-224
Author(s):  
Yannick Carette ◽  
Marthe Vanhulst ◽  
Joost R. Duflou
Keyword(s):  
Control Strategy ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Calculation Methods ◽  
Forming Process ◽  
Complex Deformation ◽  
Commercial Use ◽  
Compensation Methods ◽  
Deformation Mechanics

Despite years of supporting research, commercial use of the Single Point Incremental Forming process remains very limited. The promised flexibility and lack of specific tooling is contradicted by its highly complex deformation mechanics, resulting in a process that is easy to implement but where workpiece accuracy is very difficult to control. This paper looks at geometry compensation as a viable control strategy to increase the accuracy of produced workpieces. The input geometry of the process can be compensated using knowledge about the deformations occurring during production. The deviations between the nominal CAD geometry and the actual produced geometry can be calculated in a variety of different ways, thus directly influencing the compensation. Two different alignment methods and three deviation calculation methods are explained in detail. Six combined deviation calculation methods are used to generate compensated inputs, which are experimentally produced and compared to the uncompensated part. All different methods are able to noticeably improve the accuracy, with the production alignment and closest point deviation calculation achieving the best results

Experimental Investigation of Single Point Incremental Forming of Aluminum Sheet in Groove Test

2017 ◽  
Vol 867 ◽  
pp. 177-183 ◽  
Author(s):  
Vikrant Sharma ◽  
Ashish Gohil ◽  
Bharat Modi
Keyword(s):  
Experimental Investigation ◽  
Incremental Forming ◽  
Single Point ◽  
Fractional Factorial ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Backing Plate ◽  
Groove Test ◽  
Factorial Design Of Experiments ◽  
Tool Diameter

Incremental sheet forming is one of the latest processes in sheet metal forming industry which has drawn attention of various researchers. It has shown improved formability compared to stamping process. Single Point Incremental Forming (SPIF) process requires only hemispherical tool and no die is required hence, it is a die-less forming process. In this paper experimental investigation on SPIF for Aluminium sheet has been presented. A groove test on Vertical Machining Centre has been performed. Factors (Step depth, Blank holder clamping area, Backing plate radius, Program strategy, Feed rate and Tool diameter) affecting the process are identified and experiments are carried out using fractional factorial design of experiments. Effect of the factors on fractured depth, forming time and surface finish have been analyzed using Minitab 17 software.

scholarly journals Common defects of parts manufactured through single point incremental forming

2021 ◽  
Vol 343 ◽  
pp. 04007
Author(s):  
Mihai Popp ◽  
Gabriela Rusu ◽  
Sever-Gabriel Racz ◽  
Valentin Oleksik
Keyword(s):  
Sheet Metal ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Metal Forming Process ◽  
Serial Robot ◽  
The Many ◽  
Cold Metal

Single point incremental forming is one of the most intensely researched die-less manufacturing process. This process implies the usage of a CNC equipment or a serial robot which deforms a sheet metal with the help of a relatively simple tool that follows an imposed toolpath. As every cold metal forming process, besides the many given advantages it has also some drawbacks. One big drawback in comparison with other cold metal forming processes is the low accuracy of the deformed parts. The aim of this research is to investigate the sheet metal bending mechanism through finite element method analysis. The results shows that the shape of the retaining rings has a big influence over the final geometrical accuracy of the parts manufactured through single point incremental forming.

Sign in / Sign up

Export Citation Format

Share Document