Laser Surface Engineering of Hierarchy Hydroxyapatite Aerogel for Bone Tissue Engineering

2017 ◽  
Author(s):  
Pedram Parandoush ◽  
Hanxiong Fan ◽  
Xiaolei Song ◽  
Dong Lin
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Laser Processing ◽  
Laser Energy ◽  
Tissue Growth ◽  
Human Bone ◽  
Dense Layer ◽  
Freeze Casting ◽  
Porous Microstructure

Bioceramics with porous microstructure has attracted intense attention in tissue engineering due to tissue growth facilitation in the human body. In the present work, a novel manufacturing process for producing hydroxyapatite (HA) aerogels with a high density shell inspired by human bone microstructure is proposed for bone tissue engineering applications. This method combines laser processing and traditional freeze casting in which HA aerogel is prepared by freeze casting and aqueous suspension prior to laser processing of the aerogel surface with a focused CO2 laser beam that forms a dense layer on top of the porous microstructure. Using the proposed method, HA aerogel with dense shell was successfully prepared with a microstructure similar to human bone. The effect of laser process parameters on surface and cross-sectional morphology and microstructure was investigated in order to obtain optimum parameters and have a better understanding of the process. Low laser energy resulted in fragile surface with defects and cracks due to low temperature and inability of laser to fully melt the surface while high laser energy caused thermal damage both to surface and microstructure. The range of 40–45 W laser power, 5 mm/s scanning speed, spot size of 1 mmm and 50 % overlap in laser scanning the surface yielded the best surface morphology and micro structure in our experiments.

Laser Surface Engineering of Hierarchy Hydroxyapatite Aerogel for Bone Tissue Engineering

2017 ◽  
Vol 6 (1) ◽  
Author(s):  
Pedram Parandoush ◽  
Hanxiong Fan ◽  
Xiaolei Song ◽  
Dong Lin
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Laser Processing ◽  
Laser Power ◽  
Tissue Growth ◽  
Human Bone ◽  
Dense Layer ◽  
Freeze Casting ◽  
Porous Microstructure

Bioceramics with porous microstructure has attracted intense attention in tissue engineering due to tissue growth facilitation in the human body. In the present work, a novel manufacturing process for producing hydroxyapatite (HA) aerogels with a high density shell inspired by human bone microstructure is proposed for bone tissue engineering applications. This method combines laser processing and traditional freeze casting, in which HA aerogel is prepared by freeze casting and aqueous suspension prior to laser processing of the aerogel surface with a focused CO2 laser beam that forms a dense layer on top of the porous microstructure. Using the proposed method, HA aerogel with dense shell was successfully prepared with a microstructure similar to human bone. The effect of laser process parameters on the surface, cross-sectional morphology and microstructure was investigated in order to obtain optimum parameters and has a better understanding of the process. Low laser energy resulted in a fragile thin surface with defects and cracks due to the thermal stress induced by the laser processing. However, increasing the laser power generated a thicker dense layer on the surface, free of defects. The range of 40–45 W laser power, 5 mm/s scanning speed, spot size of 1 mm, and 50% overlap in laser scanning the surface yielded the best surface morphology and microstructure in our experiments.

Chitosan/β-TCP composites scaffolds coated with silk fibroin: a bone tissue engineering approach

2021 ◽  
Vol 17 (1) ◽  
pp. 015003
Author(s):  
Lya Piaia ◽  
Simone S Silva ◽  
Joana M Gomes ◽  
Albina R Franco ◽  
Emanuel M Fernandes ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Silk Fibroin ◽  
Cellular Proliferation ◽  
Mechanical Performance ◽  
Tissue Growth ◽  
Polymeric Scaffolds ◽  
Bioactive Agents

Abstract Bone regeneration and natural repair are long-standing processes that can lead to uneven new tissue growth. By introducing scaffolds that can be autografts and/or allografts, tissue engineering provides new approaches to manage the major burdens involved in this process. Polymeric scaffolds allow the incorporation of bioactive agents that improve their biological and mechanical performance, making them suitable materials for bone regeneration solutions. The present work aimed to create chitosan/beta-tricalcium phosphate-based scaffolds coated with silk fibroin and evaluate their potential for bone tissue engineering. Results showed that the obtained scaffolds have porosities up to 86%, interconnectivity up to 96%, pore sizes in the range of 60–170 μm, and a stiffness ranging from 1 to 2 MPa. Furthermore, when cultured with MC3T3 cells, the scaffolds were able to form apatite crystals after 21 d; and they were able to support cell growth and proliferation up to 14 d of culture. Besides, cellular proliferation was higher on the scaffolds coated with silk. These outcomes further demonstrate that the developed structures are suitable candidates to enhance bone tissue engineering.

scholarly journals Effects of the Sintering Process on Nacre-Derived Hydroxyapatite Scaffolds for Bone Engineering

Molecules ◽  
2020 ◽  
Vol 25 (14) ◽  
pp. 3129
Author(s):  
Rohaya Megat Abdul Wahab ◽  
Nurmimie Abdullah ◽  
Shahrul Hisham Zainal Ariffin ◽  
Che Azurahanim Che Abdullah ◽  
Farinawati Yazid
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Nacreous Layer ◽  
Sintering Process ◽  
Micro Computed Tomography ◽  
Native Bone ◽  
Porous Microstructure ◽  
Hydroxyapatite Scaffold ◽  
Osteoblast Markers

A hydroxyapatite scaffold is a suitable biomaterial for bone tissue engineering due to its chemical component which mimics native bone. Electronic states which present on the surface of hydroxyapatite have the potential to be used to promote the adsorption or transduction of biomolecules such as protein or DNA. This study aimed to compare the morphology and bioactivity of sinter and nonsinter marine-based hydroxyapatite scaffolds. Field emission scanning electron microscopy (FESEM) and micro-computed tomography (microCT) were used to characterize the morphology of both scaffolds. Scaffolds were co-cultured with 5 × 104/cm2 of MC3T3-E1 preosteoblast cells for 7, 14, and 21 days. FESEM was used to observe the cell morphology, and MTT and alkaline phosphatase (ALP) assays were conducted to determine the cell viability and differentiation capacity of cells on both scaffolds. Real-time polymerase chain reaction (rtPCR) was used to identify the expression of osteoblast markers. The sinter scaffold had a porous microstructure with the presence of interconnected pores as compared with the nonsinter scaffold. This sinter scaffold also significantly supported viability and differentiation of the MC3T3-E1 preosteoblast cells (p < 0.05). The marked expression of Col1α1 and osteocalcin (OCN) osteoblast markers were also observed after 14 days of incubation (p < 0.05). The sinter scaffold supported attachment, viability, and differentiation of preosteoblast cells. Hence, sinter hydroxyapatite scaffold from nacreous layer is a promising biomaterial for bone tissue engineering.

Mussel-inspired polydopamine-mediated surface modification of freeze-cast poly (ε-caprolactone) scaffolds for bone tissue engineering applications

2020 ◽  
Vol 65 (3) ◽  
pp. 273-287 ◽  
Author(s):  
Farnaz Ghorbani ◽  
Ali Zamanian ◽  
Melika Sahranavard
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Synergistic Effects ◽  
Engineering Application ◽  
Lamellar Microstructure ◽  
Tissue Engineering Application ◽  
Osteosarcoma Cell ◽  
Freeze Casting ◽  
X Ray

AbstractThere are many methods used to fabricate the scaffolds for tissue regeneration, among which freeze casting has attracted a great deal of attention due to the capability to create a unidirectional structure. In this study, polycaprolactone (PCL) scaffolds were fabricated by freeze-casting technology in order to create porous microstructure with oriented open-pore channels. To induce biomineralization, and to improve hydrophilicity and cell interactions, mussel-inspired polydopamine (PDA) was coated on the surface of the freeze-cast PCL constructs. Then, the synergistic effects of oriented microstructure and deposited layer on efficient reconstruction of injured bone were studied. Microscopic observations demonstrated that, the coated layer did not show any special change in lamellar microstructure of the scaffolds. Water-scaffold interactions were evaluated by contact angle measurements, and they demonstrated strong enhancement in the hydrophilicity of the polymeric scaffolds after PDA coating. Biodegradation ratio and water uptake evaluation confirmed an increase in the measured values after PDA precipitation. The biomineralization of the PDA-coated scaffolds was characterized by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX) and X-ray diffraction (XRD). Obtained results confirmed biomineralization of the constructs after a 28-day immersion in a simulated body fluid (SBF) solution. Mechanical analysis demonstrated higher compressive strength after PDA coating. L929 fibroblast cell viability and attachment illustrated that PDA-coated PCL scaffolds are able to support cell adhesion and proliferation. The increased secretion of alkaline phosphatase (ALP) after culturing osteosarcoma cell lines (MG-63) revealed the initial capability of scaffolds to induce bone regeneration. Therefore, the PDA-coated scaffolds introduce a promising approach for bone tissue engineering application.

Development of Novel Biodegradable Amino Acid Ester Based Polyphosphazene– Hydroxyapatite Composites for Bone Tissue Engineering

2004 ◽  
Vol 845 ◽  
Author(s):  
Swaminathan Sethuraman ◽  
Lakshmi S. Nair ◽  
Anurima Singh ◽  
Jared D Bender ◽  
Yaser E. Greish ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Amino Acid Ester ◽  
Toxic Chemicals ◽  
Mineral Component ◽  
Physiological Temperature ◽  
Calcium Phosphate Cements ◽  
Porous Microstructure

ASTRACT:Hydroxyapatite formed from low temperature setting calcium phosphate cements (CPC) are currently been used for various orthopaedic applications. CPCs are attractive candidates for the development of scaffolds for bone tissue engineering, since they are moldable, resorbable, set at physiological temperature without the use of toxic chemicals, and can be processed in an operating room setting. However they may have mechanical disadvantages which seriously limit them to non-load bearing orthopaedic applications. The aim of the present study was to develop composites from polyphosphazenes and calcium deficient hydroxyapatite precursors to form poorly crystalline hydroxyapatite-polymer composites. Composites were formed from calcium deficient hydroxyapatite precursors (Ca/P – 1.5, 1.6) and biodegradable polyphosphazenes, poly[bis(ethyl alanato)phosphazene] (PNEA) and poly[(50%ethyl alanato) (50%methyl phenoxy)phosphazene] (PNEA50mPh50) at physiological temperature. The results demonstrated that poorly crystalline hydroxyapatite that resembled the mineral component of bone was formed in the presence of biodegradable polyphosphazenes. The surface morphology of all the four composites was identical with a porous microstructure. The composites supported the adhesion and proliferation of osteoblast like MC3T3-E1 cells making them potential candidates for bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document