A RANS Based Method for the Estimation of Ship Roll Damping With Forward Speed

2004 ◽  
Author(s):  
Kumar B. Salui ◽  
Vladimir Shigunov ◽  
Dracos Vassalos
Keyword(s):  
High Speed ◽  
Turbulence Modeling ◽  
Finite Difference Methods ◽  
Computer Hardware ◽  
Navier Stokes ◽  
Roll Motion ◽  
Ship Motions ◽  
Viscous Effects ◽  
Flow Models ◽  
Ship Roll

For the prediction of ship roll motion, viscous effects must be taken into account. Several methods, experimental and theoretical, have previously been used to calculate hydrodynamic forces in roll motion. Theoretical methods applied so far to this problem have been based mainly on potential flow models, which cannot account for viscous effects adequately or need pre-defined flow separation like vortex methods. Recent development of computer hardware enables application of methods based on flow field discretisation such as finite-difference methods to solution of problems of practical ship design such as ship motions and control. In the present study, a Reynolds-Averaged Navier-Stokes solver is used to calculate hydrodynamic loads during forced roll motion at different Froude numbers. The solution method adopted is based on unstructured finite-volume discretisation with collocated arrangement of flow variables. A pressure-correction algorithm (SIMPLE) is used for the pressure-velocity coupling. A standard k–ε model is used for the turbulence modeling. An advanced differencing scheme called high-resolution interface capturing (HRIC) is used for accurate resolution of the free surface in the scope of a multiphase-type description. A high-speed hard chine vessel with and without skeg is studied. Close agreement is found between the present calculations and experimental results.

Ship Roll Motion Damping Using Bilge Keels – A Detailed CFD Investigation

2015 ◽  
Author(s):  
Joshua Counsil ◽  
Kevin McTaggart ◽  
Dominic Groulx ◽  
Kiari Boulama
Keyword(s):  
Experimental Studies ◽  
The Body ◽  
Navier Stokes ◽  
Roll Motion ◽  
Empirical Methods ◽  
Viscous Effects ◽  
Vortex Interactions ◽  
Ship Roll ◽  
Semi Empirical ◽  
Bilge Keel

A study has been undertaken to test the value of unsteady Reynolds-averaged Navier-Stokes (URANS) and traditional semi-empirical methods in the face of complex ship roll phenomena, and provide insight into the selection of bilge keel span for varying roll amplitudes. The computational fluid dynamics (CFD) code STAR-CCM+ is employed and two-dimensional submerged bodies undergoing forced roll motion are analyzed. The spatial resolution and timestepping scheme are validated by comparison with published numerical and experimental studies. The model is then applied to a fully-submerged circular cylinder with bilge keels of varying span and undergoing roll motion at varying angular amplitudes. Extracted hydrodynamic coefficients indicate that in general, increasing displacement amplitude and bilge keel span yields increased added mass and increased damping. The relationship is complex and highly dependent upon vortex interactions with each other and the body. The semi-empirical methods used for comparison yield good predictions for simple vortex interactions but fail where viscous effects are strong. Hence, URANS methods are shown to be necessary for friction-dominated flows while semi-empirical methods remain useful for initial design considerations.

Rotational and Quasiviscous Cold Flow Models for Axisymmetric Hybrid Propellant Chambers

2010 ◽  
Vol 132 (10) ◽  
Author(s):  
Joseph Majdalani ◽  
Michel Akiki
Keyword(s):  
Rocket Engine ◽  
Navier Stokes ◽  
Mathematical Treatment ◽  
Hybrid Rocket ◽  
Mean Flow ◽  
Viscous Effects ◽  
Navier Stokes Equation ◽  
Flow Models ◽  
Hybrid Rocket Engine ◽  
Wall Injection

In this work, we present two simple mean flow solutions that mimic the bulk gas motion inside a full-length, cylindrical hybrid rocket engine. Two distinct methods are used. The first is based on steady, axisymmetric, rotational, and incompressible flow conditions. It leads to an Eulerian solution that observes the normal sidewall mass injection condition while assuming a sinusoidal injection profile at the head end wall. The second approach constitutes a slight improvement over the first in its inclusion of viscous effects. At the outset, a first order viscous approximation is constructed using regular perturbations in the reciprocal of the wall injection Reynolds number. The asymptotic approximation is derived from a general similarity reduced Navier–Stokes equation for a viscous tube with regressing porous walls. It is then compared and shown to agree remarkably well with two existing solutions. The resulting formulations enable us to model the streamtubes observed in conventional hybrid engines in which the parallel motion of gaseous oxidizer is coupled with the cross-streamwise (i.e., sidewall) addition of solid fuel. Furthermore, estimates for pressure, velocity, and vorticity distributions in the simulated engine are provided in closed form. Our idealized hybrid engine is modeled as a porous circular-port chamber with head end injection. The mathematical treatment is based on a standard similarity approach that is tailored to permit sinusoidal injection at the head end.

NUMERICAL PREDICTION OF VERTICAL SHIP MOTIONS AND ADDED RESISTANCE

2021 ◽  
Vol 159 (A4) ◽  
Author(s):  
F Cakici ◽  
E Kahramanoglu ◽  
A D Alkan
Keyword(s):  
Deep Water ◽  
High Speed ◽  
Computer Experiments ◽  
Navier Stokes ◽  
Ship Motions ◽  
Added Resistance ◽  
Strip Theory ◽  
Head Waves ◽  
Computational Fluid Dynamics Cfd ◽  
Volume Method

Along with the development of computer technology, the capability of Computational Fluid Dynamics (CFD) to conduct ‘virtual computer experiments’ has increased. CFD tools have become the most important tools for researchers to deal with several complex problems. In this study, the viscous approach called URANS (Unsteady Reynolds Averaged Navier-Stokes) which has a fully non-linear base has been used to solve the vertical ship motions and added resistance problems in head waves. In the solution strategy, the FVM (Finite Volume Method) is used that enables numerical discretization. The ship model DTMB 5512 has been chosen for a series of computational studies at Fn=0.41 representing a high speed case. Firstly, by using CFD tools the TF (Transfer Function) graphs for the coupled heave- pitch motions in deep water have been generated and then comparisons have been made with IIHR (Iowa Institute of Hydraulic Research) experimental results and ordinary strip theory outputs. In the latter step, TF graphs of added resistance for deep water have been generated by using CFD and comparisons have been made only with strip theory.

Numerical Prediction of Vertical Ship Motions and Added Resistance

2017 ◽  
Vol 159 (A4) ◽  
Author(s):  
F Cakici ◽  
E Kahramanoglu ◽  
A D Alkan
Keyword(s):  
Deep Water ◽  
High Speed ◽  
Computer Experiments ◽  
Navier Stokes ◽  
Ship Motions ◽  
Added Resistance ◽  
Strip Theory ◽  
Head Waves ◽  
Computational Fluid Dynamics Cfd ◽  
Volume Method

Along with the development of computer technology, the capability of Computational Fluid Dynamics (CFD) to conduct ‘virtual computer experiments’ has increased. CFD tools have become the most important tools for researchers to deal with several complex problems. In this study, the viscous approach called URANS (Unsteady Reynolds Averaged Navier-Stokes) which has a fully non-linear base has been used to solve the vertical ship motions and added resistance problems in head waves. In the solution strategy, the FVM (Finite Volume Method) is used that enables numerical discretization. The ship model DTMB 5512 has been chosen for a series of computational studies at Fn=0.41 representing a high speed case. Firstly, by using CFD tools the TF (Transfer Function) graphs for the coupled heave-pitch motions in deep water have been generated and then comparisons have been made with IIHR (Iowa Institute of Hydraulic Research) experimental results and ordinary strip theory outputs. In the latter step, TF graphs of added resistance for deep water have been generated by using CFD and comparisons have been made only with strip theory.

Calculation of Debris Trajectories During High-Speed Snowplowing

2002 ◽  
Author(s):  
H. K. Nakhla ◽  
B. E. Thompson
Keyword(s):  
Particle Tracking ◽  
High Speed ◽  
Turbulence Modeling ◽  
Stokes Equations ◽  
Cutting Edge ◽  
Navier Stokes ◽  
Engineering Model ◽  
Navier Stokes Equations ◽  
Snow Plowing ◽  
Reynolds Averaged Navier Stokes

An engineering model is presented to calculate the trajectory of airborne debris that adversely affects visibility during high-speed snow plowing. Reynolds-averaged Navier-Stokes equations are solved numerically with turbulence-modeling, particle-tracking, and cutting-edge approximations. Results suggest snow can be divided into splash and snow-cloud when designing treatments to improve visibility for snowplow drivers and following traffic. Calculated results confirm the findings of windtunnel and road tests, specifically that the trap angle of overplow deflectors should be less than 50 degrees to eliminate snow debris blowing over top of the plow onto the windscreen.

Roll Damping Simulations of an Offshore Heavy Lift DP3 Installation Vessel Using the CFD Toolbox OpenFOAM

2020 ◽  
Author(s):  
Brecht Devolder ◽  
Florian Stempinski ◽  
Arjan Mol ◽  
Pieter Rauwoens
Keyword(s):  
Boundary Element ◽  
Damping Coefficient ◽  
Navier Stokes ◽  
Roll Motion ◽  
Viscous Effects ◽  
Roll Damping ◽  
Two Phase ◽  
Damping Behavior ◽  
External Moment ◽  
Heavy Lift

Abstract In this work, the roll damping behavior of the offshore heavy lift DP3 installation vessel Orion from the DEME group is studied. Boundary element codes using potential flow theory require a roll damping coefficient to account for viscous effects. In this work, the roll damping coefficient is calculated using the Computational Fluid Dynamics (CFD) toolbox OpenFOAM. The two-phase Navier-Stokes fluid solver is coupled with a motion solver using a partitioned fluid-structure interaction algorithm. The roll damping is assessed by the Harmonic Excited Roll Motion (HERM) technique. An oscillating external moment is applied on the hull and the roll motion is tracked. Various amplitudes and frequencies of the external moment and different forward speeds, are numerically simulated. These high-fidelity full-scale simulations result in better estimations of roll damping coefficients for various conditions in order to enhance the accuracy of efficient boundary element codes for wave-current-structure interactions simulations.

A Roll Damping Analysis of a Standard US Naval Hull Form (DTMB 5415)

2021 ◽  
Vol 163 (A1) ◽  
pp. 79-86
Author(s):  
L F Hu ◽  
Q T Gong ◽  
Z M Yuan ◽  
X Y Wang ◽  
J X Duan
Keyword(s):  
Numerical Simulation ◽  
Vof Method ◽  
Navier Stokes ◽  
Roll Motion ◽  
Ship Motions ◽  
Stability Criteria ◽  
Fluid Interface ◽  
Roll Damping ◽  
Hull Form ◽  
Us Navy

Accurate prediction of roll damping is important in calculating the roll motion of a ship. This paper presents a roll decay analysis of an intact US Navy Destroyer hull form (DTMB 5415) using a Navier–Stokes (NS) solver with the volume of fluid (VOF) method. Dynamic overset mesh techniques were employed to handle mesh updating required to obtain transient ship motions. The VOF method was used to capture the fluid interface. The effect of turbulence was considered by means of a k-w and a k-e model. A sensitivity analysis was conducted, in terms of the grid, timesteps and degree of freedom. The roll decay results of the numerical simulation have been compared with those of prior physical model testing (Gokce and Kinaci, 2018), and the different roll decay responses used to predict the roll damping. It is intended that this research be a useful step towards establishing intact ship stability criteria, as part of current research.

Prediction of Viscous Ship Roll Damping by Unsteady Navier-Stokes Techniques

1997 ◽  
Vol 119 (2) ◽  
pp. 108-113 ◽  
Author(s):  
R. A. Korpus ◽  
J. M. Falzarano
Keyword(s):  
Potential Flow ◽  
Turbulence Modeling ◽  
Numerical Technique ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Ship Motions ◽  
Ship Hulls ◽  
Unsteady Rans ◽  
Flow Effects ◽  
Real Flow

This paper describes a numerical technique for analyzing the viscous unsteady flow around oscillating ship hulls. The technique is based on a general Reynolds-averaged Navier-Stokes (RANS) capability, and is intended to generate viscous roll moment data for the incorporation of real-flow effects into potential flow ship motions programs. The approach utilizes the finite analytic technique for discretizing the unsteady RANS equations, and a variety of advanced turbulence models for closure. The calculations presented herein focus on viscous and vortical effects without free-surface, and utilize k-epsilon turbulence modeling. Series variations are presented to study the effects of frequency, amplitude, Reynolds number, and the presence of bilge keels. Moment component breakdown studies are performed in each case to isolate the effects of viscosity, vorticity, and potential flow pressures.

A Time-Linearized Navier–Stokes Analysis of Stall Flutter

1999 ◽  
Vol 122 (3) ◽  
pp. 467-476 ◽  
Author(s):  
William S. Clark ◽  
Kenneth C. Hall
Keyword(s):  
Unsteady Flow ◽  
Turbulence Modeling ◽  
Unsteady Aerodynamics ◽  
Computational Method ◽  
Navier Stokes ◽  
Integration Scheme ◽  
Mean Flow ◽  
Viscous Effects ◽  
Computational Mesh ◽  
Stall Flutter

A computational method for predicting unsteady viscous flow through two-dimensional cascades accurately and efficiently is presented. The method is intended to predict the onset of the aeroelastic phenomenon of stall flutter. In stall flutter, viscous effects significantly impact the aeroelastic stability of a cascade. In the present effort, the unsteady flow is modeled using a time-linearized Navier–Stokes analysis. Thus, the unsteady flow field is decomposed into a nonlinear spatially varying mean flow plus a small-perturbation harmonically varying unsteady flow. The resulting equations that govern the perturbation flow are linear, variable coefficient partial differential equations. These equations are discretized on a deforming, multiblock, computational mesh and solved using a finite-volume Lax–Wendroff integration scheme. Numerical modeling issues relevant to the development of the unsteady aerodynamic analysis, including turbulence modeling, are discussed. Results from the present method are compared to experimental stall flutter data, and to a nonlinear time-domain Navier–Stokes analysis. The results presented demonstrate the ability of the present time-linearized analysis to model accurately the unsteady aerodynamics associated with turbomachinery stall flutter. [S0889-504X(00)00203-8]

A Study on the Influence of Ship Roll Characteristics on the Risk of Cargo Shifting

2004 ◽  
Vol 41 (02) ◽  
pp. 51-59
Author(s):  
Anna Ryrfeldt
Keyword(s):  
Sensitivity Analysis ◽  
Transfer Function ◽  
Computational Efficiency ◽  
Transfer Functions ◽  
Resonance Peak ◽  
Roll Motion ◽  
Ship Motions ◽  
Load Case ◽  
Contributing Factors ◽  
Ship Roll

In a previous work a methodology for assessing the risk of cargo shifting has been developed and used to study the influence of different parameters on the risk of cargo shifting. It has been found that ship rolling is one of the major contributing factors of cargo shifting. Linear theory of ship motions is presently used in the methodology because of computational efficiency and simplicity. Because the roll motion is complex and difficult to predict because of nonlinearities, the present study has been performed in order to study the influence of the roll motion on the risk of cargo shifting. This study may be seen as a sensitivity analysis of roll motion with respect to cargo shifting. The risk has been studied by the number of potentially dangerous conditions and how they depend on such parameters as wave height and period, and ship heading toward waves. The influence of roll amplitude and phase, as well as the influence of roll stabilizing devices, on the number of dangerous conditions is studied for two vessels and two load cases each. Roll amplitude influence is analyzed by changing the amplitude of the transfer function, and the results show that the influence of roll amplitude is very large. This influence is especially marked when the roll amplitude is large and the vertical and horizontal accelerations are small to moderate. The influence of roll stabilizing devices is studied by cutting of the resonance peak in the transfer functions. The results show that roll stabilizing is often efficient but that it can be more important to choose load case in order to attain good seakeeping characteristics, especially with respect to roll motion.

Sign in / Sign up

Export Citation Format

Share Document