Location Targeting for Wave Energy Deployment From an Operation and Maintenance Perspective

Author(s):  
Adrián D. de Andrés ◽  
Raúl Guanche ◽  
César Vidal ◽  
Íñigo J. Losada

When looking for a location for a wave energy converter (WEC) installation, developers usually look for sites with high or very high wave energy resource. From this perspective, countries like Scotland or Ireland have made great effort to include this energy source in their energy mix due to their expected high untapped potential. However, higher resource carries marine operation restrictions. Because of that, the selection of a site for a WEC deployment, the installation, operation and maintenance factors have to be considered from the beginning. In this work an analysis of the suitable locations for the development of wave energy is performed based on the operation and maintenance (O&M) parameters. This study is performed across the globe coastlines taking the met-ocean climate data from Reguero et al (2011) global reanalysis database (GOW) developed at IH Cantabria. Firstly, an analysis of the global availability and accessibility levels is performed all around the globe taking different wave height thresholds into account. Seven specific locations (North-West Denmark, West of Ireland, Chile, North of Spain, West Portugal, South-West Australia and North of Scotland) with high interest on wave energy have been further analyzed and compared. Secondly, the O&M access limits are quantified in terms of the weather windows and the waiting period between available weather windows. A statistical analysis of these parameters is performed within different weather windows lengths (6 h, 12 h and 24 h). The seasonality of these parameters is also analyzed. Finally, a failure analysis will be carried out, simulating the repair operation along the lifecycle of the device for different failure rates and waiting times. The affection of this failure and repair scheme over the power production of a device analyzed previously in Andres et al (2014) will be presented. In this study, some locations with high resource (Spain, Nova Scotia) lead to medium to high accessibilities/availabilities due to the balance between resource and persistence of the weather conditions. Some locations with high resource such as Chile or Australia resulted inaccessible during very long periods of time due to the persistence of severe conditions and then not very recommended for novel converters with uncertain failure rates.

Author(s):  
Sarah Gallagher ◽  
Roxana Tiron ◽  
Frederic Dias

The western coast of Ireland possesses one of the highest wave energy resources in the world and consequently is a promising location for the future deployment of Wave Energy Converters (WECs). Most wave climate studies for this region have focused primarily on the offshore area since it enjoys higher energy densities. However, recent studies have shown that nearshore locations offer a similar potential for the exploitation of wave energy as offshore sites [13]. Furthermore, the proximity of WEC devices to the shore will likely reduce losses in power transport, and facilitate access for maintenance activities. In this context, we analyse the wave climate over a ten year period for several nearshore sites off the Irish West Coast. The wave climate is estimated using a spectral wave model, WaveWatch III, forced with wind and spectral wave data from the ECMWF (European Centre for Medium Range Weather Forecast) operational archive. The wave model is validated with wave buoy data from intermediate to shallow depths (< 60 m). Our focus is on two aspects of the wave climate resource assessment. Firstly, we characterise the directionality of the wave energy resource (mean direction, directional spread) which affects the site selection, design and performance of nearshore WECs. Secondly, we discuss the climate data from the perspective of accessibility for maintenance. When selecting sites for the deployment of WECs, a balance needs to be found between two opposing criteria: the existence of sufficiently long, continuous time intervals of calm sea states (weather windows) which are necessary for maintenance activities to take place, and a high, consistent level of wave energy density, essential for economically viable wave energy extraction.


2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Michael Anderson ◽  
Asfaw Beyene

A common platform of wind and wave energy conversion should reduce upfront as well as maintenance costs relative to wave and offshore wind energy converters installed separately. For this cost reduction to happen, temporally integrated resource estimate of wind and wave at a given coordinate is desirable so that areas of high wind and wave energy convergences can be identified. In this paper, a combined energy resource potential of wave and wind modeling procedure is shown using the California coast as a case study, mapped for three distinct years: a “calm” year, an El Nino year, and a recent “normal” year allowing model analyses of a range of possible weather conditions and sea states along the coastline.


2021 ◽  
Vol 172 ◽  
pp. 1212-1224
Author(s):  
Seongho Ahn ◽  
Vincent S. Neary ◽  
Mohammad Nabi Allahdadi ◽  
Ruoying He

2021 ◽  
Vol 13 (11) ◽  
pp. 2070
Author(s):  
Ana Basañez ◽  
Vicente Pérez-Muñuzuri

Wave energy resource assessment is crucial for the development of the marine renewable industry. High-frequency radars (HF radars) have been demonstrated to be a useful wave measuring tool. Therefore, in this work, we evaluated the accuracy of two CODAR Seasonde HF radars for describing the wave energy resource of two offshore areas in the west Galician coast, Spain (Vilán and Silleiro capes). The resulting wave characterization was used to estimate the electricity production of two wave energy converters. Results were validated against wave data from two buoys and two numerical models (SIMAR, (Marine Simulation) and WaveWatch III). The statistical validation revealed that the radar of Silleiro cape significantly overestimates the wave power, mainly due to a large overestimation of the wave energy period. The effect of the radars’ data loss during low wave energy periods on the mean wave energy is partially compensated with the overestimation of wave height and energy period. The theoretical electrical energy production of the wave energy converters was also affected by these differences. Energy period estimation was found to be highly conditioned to the unimodal interpretation of the wave spectrum, and it is expected that new releases of the radar software will be able to characterize different sea states independently.


2013 ◽  
Vol 55 ◽  
pp. 480-489 ◽  
Author(s):  
J.P. Sierra ◽  
D. González-Marco ◽  
J. Sospedra ◽  
X. Gironella ◽  
C. Mösso ◽  
...  

2021 ◽  
Vol 2021 (02) ◽  
pp. 214-225
Author(s):  
Sergey Kulik ◽  
Аnatoliy Kashevarov ◽  
Zamira Ishankhodjaeva

During World War II, representatives of almost all the Soviet Republics fought in partisan detachments in the occupied territory of the Leningrad Region. Among them were many representatives of the Central Asian republics: Kazakhstan, Kyrgyzstan and Uzbekistan. Many Leningrad citizens, including relatives of partisans, had been evacuated to Central Asia by that time. However, representatives of Asian workers’ collectives came to meet with the partisans. The huge distance, the difference in cultures and even completely different weather conditions did not become an obstacle to those patriots-Turkestanis who joined the resistance forces in the North-West of Russia.


Author(s):  
Ed Mackay ◽  
AbuBakr Bahaj ◽  
Chris Retzler ◽  
Peter Challenor

The use of altimeter measurements of significant wave height and energy period for quantifying wave energy resource is investigated. A new algorithm for calculating wave period from altimeter data, developed by the authors in previous work, is used to estimate the power generated by the Pelamis wave energy converter and compared to estimates from collocated buoy data. In offshore locations accurate estimates of monthly and annual mean power can be achieved by combining measurements from six altimeter missions. Furthermore, by averaging along sections of the altimeter ground track, we demonstrate that it is possible to gauge the spatial variability in nearshore areas, with a resolution of the order of 10 km. Although measurements along individual tracks are temporally sparse, with TOPEX/Poseidon and Jason on a 10 day repeat orbit, GFO 17 days, and ERS-2 and ENVISAT 35 days, the long record of altimeter measurements means that multi-year mean power from single tracks are of a useful accuracy.


2015 ◽  
Vol 42 (13) ◽  
pp. 5452-5459 ◽  
Author(s):  
Lonneke Goddijn-Murphy ◽  
Belén Martín Míguez ◽  
Jason McIlvenny ◽  
Philippe Gleizon

Sign in / Sign up

Export Citation Format

Share Document