Advanced Structural Integrity Assessment Tools for Safe Long Term Operation (ATLAS+)

2018 ◽  
Author(s):  
Sebastian Lindqvist ◽  
Kim Wallin ◽  
Dominique Moinereau ◽  
Mike Smith ◽  
Stéphane Marie ◽  
...  
Keyword(s):  
Nuclear Reactor ◽  
Structural Integrity ◽  
Assessment Tools ◽  
Experimental Proof ◽  
Term Operation ◽  
Integrity Assessment ◽  
Safety Margins ◽  
Piping Systems ◽  
Reactor Pressure

The main objective and mission of the ATLAS+ project is to develop advanced structural assessment tools to address the remaining technology gaps for the safe and long term operation of nuclear reactor pressure coolant boundary systems. This is achieved by development and validation of: • innovative quantitative methodologies to transfer laboratory material properties to assess the structural integrity of large components, • enhanced treatment of weld residual stresses when subjected to long term operation, • advanced simulation tools based on fracture mechanics methods using physically based mechanistic models, • improved engineering methods to assess components under long term operation taking into account specific operational demands, • integrated probabilistic assessment methods to reveal uncertainties and justify safety margins. Additionally, the objective is to disseminate the findings of the work through special training sessions and links to the NUGENIA association. The project scope of work focuses on piping systems of the reactor coolant pressure boundary components (RCPB) excluding the reactor pressure vessel (RPV). The project is aimed on an experimental proof of concept and validates the developed methodology both at the laboratory scale and the full scale level. The ATLAS+ project contains 4 main technical work packages and one training and dissemination package. These are summarised here.

Advanced Structural Integrity Assessment Tools for Safe Long Term Operation: ATLAS+ Project — Status of the Activities of the WP3 on Modelling

2019 ◽  
Author(s):  
Stéphane Marie ◽  
Arnaud Blouin ◽  
Tomas Nicak ◽  
Dominique Moinereau ◽  
Anna Dahl ◽  
...  
Keyword(s):  
Large Scale ◽  
Structural Integrity ◽  
Assessment Tools ◽  
Local Approach ◽  
Coupled Models ◽  
Large Defect ◽  
Ductile Tearing ◽  
Term Operation ◽  
Integrity Assessment

Abstract The main objective and mission of the ATLAS+ project is to develop advanced structural assessment tools to address the remaining technology gaps for the safe and long term operation of nuclear reactor pressure coolant boundary systems. ATLAS+ WP3 focuses mainly on ductile tearing prediction for large defect in components: Several approaches have been developed to accurately model the ductile tearing process and to take into account phenomena such as the triaxiality effect, or the ability to predict large tearing in industrial components. These advanced models include local approach coupled models or advanced energetic approaches. Unfortunately, the application of these tools is today rather limited to R&D expertise. However, because of the continuous progress in the performance of the calculation tools and accumulated knowledge, in particular by members of ATLAS+, these models can now be considered as relevant for application in the context of engineering assessments. WP3 will therefore: • Illustrate the implementation of these models for industrial applications through the interpretation of large scale mock-ups (with cracks in weld joints for some of them), • Make recommendations for the implementation of the advanced models in engineering assessments, • Correct data from the conventional engineering approach by developing a methodology to produce J-Δa curve suitable case by case, based on local approach models, • Improve the tools, guidance and procedures for undertaking leak-before-break (LBB) assessments of piping components, particularly in relation to representing structural representative fracture toughness J-Resistance curves and the influence of weld residual stresses. To achieve these goals, WP3 is divided into 4 sub-WPs and this paper presents the progress of the work performed in each sub-WP after 24 months of activities.

The Experimental Work in Support to ATLAS+ Project

2018 ◽  
Author(s):  
Dominique Moinereau ◽  
Patrick Le Delliou ◽  
Anna Dahl ◽  
Yann Kayser ◽  
Szabolcs Szavai ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Experimental Work ◽  
Large Scale ◽  
Nuclear Reactor ◽  
Structural Integrity ◽  
Assessment Tools ◽  
Ductile Material ◽  
Small Scale ◽  
Term Operation ◽  
Integrity Assessment

The 4-years European project ATLAS+ project was launched in June 2017. Its main objective is to develop advanced structural assessment tools to address the remaining technology gaps for the safe and long term operation of nuclear reactor pressure coolant boundary systems. The transferability of ductile material properties from small scale fracture mechanics specimens to large scale components is one of the topics of the project. A large programme of experimental work is to be conducted in support of the development and validation of advanced tools for structural integrity assessment within the framework of the work-package 1 (WP 1): Design and execution of simulation oriented experiments to validate models at different scales. The experimental work is based on a full set of fracture mechanics experiments conducted on standard specimens and large scale components (several pipes and one mock-up), including a full materials characterization. Three materials are considered: • a ferritic steel 15NiCuMoNb5 (WB 36) • an aged austenitic stainless steel weld • a VVER (eastern PWR) dissimilar metal weld (DMW) The paper presents the WP 1, the experimental programme and summarizes the first results.

Advanced Structural Integrity Assessment Tools for Safe Long Term Operation: ATLAS+ Project — Status of the Activities of the WP3 on Modelling in 2020

2020 ◽  
Author(s):  
Arnaud Blouin ◽  
Stéphane Marie ◽  
Tomas Nicak ◽  
Antti Timperi ◽  
Peter Gill
Keyword(s):  
Large Scale ◽  
Structural Integrity ◽  
Assessment Tools ◽  
Local Approach ◽  
Coupled Models ◽  
Large Defect ◽  
Ductile Tearing ◽  
Term Operation ◽  
Integrity Assessment

Abstract The main objective and mission of the ATLAS+ project is to develop advanced structural assessment tools to address the remaining technology gaps for the safe and long term operation of nuclear reactor pressure coolant boundary systems. ATLAS+ WP3 focuses mainly on ductile tearing prediction for large defect in piping and associated components: Several approaches have been developed to accurately model the ductile tearing process and to take into account phenomena such as triaxiality effects, or the ability to predict large tearing in industrial components. These advanced models include local approach coupled models or advanced energetic approaches. Unfortunately, the application of these tools is currently rather limited to R&D expertise. However, because of the continuous progress in the performance of calculation tools and accumulated knowledge, in particular by members of the ATLAS+ consortium, these models can now be considered as relevant for application in the context of engineering assessments. WP3 has been planned to: • Illustrate the implementation of these models for industrial applications through the interpretation of large scale mock-ups (with cracks in weld joints for some of them), • Make recommendations for the implementation of the advanced models in engineering assessments, • Correct data from the conventional engineering approach by developing a methodology to produce J-Δa curve suitable case by case, based on local approach models, • Improve the tools, guidance and procedures for undertaking leak-before-break (LBB) assessments of piping components, particularly in relation to representing structural representative fracture toughness J-Resistance curves and the influence of weld residual stresses. To achieve these goals, WP3 is divided into 4 sub-WPs and this paper presents the progress of the work performed in each sub-WP after 36 months of activities.

Ductile Tearing Prediction of Ferritic Pipe Material by GTN Model for ATLAS+ European Project

2020 ◽  
Author(s):  
Kiminobu Hojo ◽  
Takatoshi Hirota ◽  
Naoki Ogawa ◽  
Satoshi Kumagai
Keyword(s):  
Fracture Behavior ◽  
Structural Integrity ◽  
Assessment Tools ◽  
Pipe Material ◽  
Work Package ◽  
Gtn Model ◽  
Term Operation ◽  
Integrity Assessment ◽  
European Project

Abstract The main objective and mission of the European project ATLAS+ (Advanced Structural Integrity Assessment Tools for Safe Long Term Operation) are to address the remaining technology gaps for the safe and long term operation of nuclear reactor pressure coolant boundary systems. This project includes the development and validation of advanced simulation tools based on fracture mechanics methods using physically based mechanistic models. In the Work Package 3 (WP3), benchmark calculations using different available models are conducted to investigate the accuracy and the capability of the different models for ductile crack growth of different constraint condition, such as laboratory specimens and piping structure, which were tested in the Work Package 1 (WP 1). The authors joined the WP3 activity and investigated the effect of the parameters of the GTN (Gurson-Tvergaard-Needleman) model on the fracture behavior of the specimens. In this paper, the parameters of the GTN model were calibrated to simulate the fracture behavior of CT specimens, notched tensile (NT) specimens and single edge notched tensile (SENT) specimens of ferritic pipe material and the applicability of the GTN model. The adjusted parameters by the CT specimen predicted the fracture behavior of the SENT specimens, but did not those of the NT specimens. The adjusted parameters by the CT specimens were applied to the piping structure mock-up and they predicted the maximum load in high accuracy.

Nuclear Reactor Pressure Vessel Integrity Assessment: Enhancement Provided by 3D Modeling Flaw Stability Calculations

2013 ◽  
Author(s):  
Adolfo Arrieta-Ruiz ◽  
Eric Meister ◽  
Henriette Churier
Keyword(s):  
Pressure Vessel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Structural Integrity ◽  
Reactor Pressure Vessel ◽  
Integrity Assessment ◽  
Potential Damage ◽  
Vessel Integrity ◽  
Reactor Pressure

Structural integrity of the Reactor Pressure Vessel (RPV) is one of the main considerations regarding safety and lifetime of Nuclear Power Plants (NPP) since this component is considered as not reasonably replaceable. Brittle fracture risk associated with the embrittlement of RPV steel in irradiated areas is the main potential damage. In France, deterministic integrity assessment for RPV is based on the crack initiation stage. The stability of an under-clad postulated flaw in the core area is currently evaluated under a Pressurized Thermal Shock (PTS) through a fracture mechanics simplified method. One of the axes of EDF’s implemented strategy for NPP lifetime extension is the improvement of the deterministic approach with regards to the input data and methods so as to reduce conservatisms. In this context, 3D finite element elastic-plastic calculations with flaw modelling have been carried out recently in order to quantify the enhancement provided by a more realistic approach in the most severe events. The aim of this paper is to present both simplified and 3D modelling flaw stability evaluation methods and the results obtained by running a small break LOCA event.

French RPV PTS Assessment: An Overview of EDF Research and Development in Progress on Thermalhydraulic, Materials and Mechanical Aspects

2003 ◽  
Author(s):  
Dominique Moinereau ◽  
Jean-Michel Frund ◽  
Henriette Churier-Bossennec ◽  
Georges Bezdikian ◽  
Alain Martin
Keyword(s):  
Structural Integrity ◽  
Three Dimensional ◽  
Crack Arrest ◽  
Pressure Vessels ◽  
Short Description ◽  
Constraint Effect ◽  
Materials Properties ◽  
Integrity Assessment ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

A significant extensive Research & Development work is conducted by Electricite´ de France (EDF) related to the structural integrity re-assessment of the French 900 and 1300 MWe reactor pressure vessels in order to increase their lifetime. Within the framework of this programme, numerous developments have been implemented or are in progress related to the methodology to assess flaws during a pressurized thermal shock (PTS) event. The paper contains three aspects: a short description of the specific French approach for RPV PTS assessment, a presentation of recent improvements on thermalhydraulic, materials and mechanical aspects, and finally an overview of the present R&D programme on thermalhydraulic, materials and mechanical aspects. Regarding the last aspect on present R&D programme, several projects in progress will be shortly described. This overview includes the redefinition of some significant thermalhydraulic transients based on some new three-dimensional CFD computations (focused at the present time on small break LOCA transient), the assessment of vessel materials properties, and the improvement of the RPV PTS structural integrity assessment including several themes such as warm pre-stress (WPS), crack arrest, constraint effect ....

Integrity Assessment of a Free-Fall Lifeboat Launched From a FPSO

2015 ◽  
Author(s):  
Guomin Ji ◽  
Nabila Berchiche ◽  
Sébastien Fouques ◽  
Thomas Sauder ◽  
Svein-Arne Reinholdtsen
Keyword(s):  
Finite Element ◽  
Pressure Distribution ◽  
Structural Integrity ◽  
Dynamic Effect ◽  
Sensitivity Study ◽  
Computational Time ◽  
Load Factor ◽  
Time Varying ◽  
Integrity Assessment

The paper addresses the structural integrity assessment of lifeboat launched from floating production, storage and offloading (FPSO) vessels. The study is based on long-term drop lifeboat simulations accounting for more than 50 years of hindcast data of metocean conditions and corresponding FPSO motions. Selection of the load cases and strength analyses with high computational time is a challenge. The load cases analyzed are those corresponding to the 99th percentile of long term distribution of indicators for large slamming loads (CARXZ) or large submergence (Imaxsub). For six selected cases, the time-varying pressure distribution on the lifeboat hull during and after water impact is calculated by CFD simulations using StarCCM+. The finite element model (FEM) of the composite structure of the lifeboat is modelled by ABAQUS. Quasi-static finite element (FE) analyses are performed for the selected load cases. The structural integrity is assessed by the maximum stress and Tsai-Wu failure measure. In the present study, the load and resistance factors are combined and applied to the response. A sensitivity study is performed to investigate the non-linear load/response effects when the load factor is applied to the load. In addition, dynamic analysis is performed with the time-varying pressure distribution for selected case and the dynamic effect is investigated.

scholarly journals Inclusion of Warm Pre-Stress Concept in French RPV Structural Integrity Assessment

2016 ◽  
Author(s):  
Dominique Moinereau ◽  
Malik Ait-Bachir ◽  
Stéphane Chapuliot ◽  
Stéphane Marie ◽  
Clémentine Jacquemoud ◽  
...  
Keyword(s):  
Brittle Fracture ◽  
Fracture Resistance ◽  
Large Scale ◽  
Structural Integrity ◽  
Stress Effect ◽  
Local Approach ◽  
Experimental Database ◽  
Term Operation ◽  
Integrity Assessment ◽  
Brittle Fracture Resistance

Evaluation of the fracture resistance of nuclear reactor pressure vessel (RPV) regarding the risk of brittle fracture is a key point in the structural integrity assessment of the component (RPV). Such approach is codified in French RSE-M code, based on a very conservative methodology. With respect to long term operation, an improvement of the present methodology is necessary and in progress to reduce this conservatism. One possible significant improvement is the inclusion of the warm pre-stress (WPS) concept in the assessment. After a short description of the WPS concept, the process engaged in France to allow inclusion of WPS in the integrity assessment is presented. In a first step, experimental and numerical studies have been conducted in France by EDF, CEA and AREVA (also including international collaborations and projects) to demonstrate and validate the beneficial effect of WPS on the brittle fracture resistance of RPV steels. A large panel of experimental results and data is now available obtained on small, medium and large scale specimens on representative RPV steels (including highly irradiated RPV materials). These data have been included in a specific WPS experimental database. Main experiments have been interpreted by refined computations, based on elastic plastic analyses and local approach to cleavage fracture. In a second step, a new criterion (ACE criterion) has been proposed by French organizations (AREVA, CEA and EDF) for an easy simplified evaluation of warm pre-stress effect on the brittle fracture resistance of RPV steels. Accuracy and conservatism of the criterion is verified by comparison to experimental data results and numerical analyses. Finally, implementation of the WPS effect in the French RSE-M code (for in service assessment) is in progress, based on the ACE criterion. The present paper summarizes all these steps leading to codification of WPS in RSE-M code.

Sign in / Sign up

Export Citation Format

Share Document