Assessment of Structural Integrity on Irradiated Steel Structure: Focusing on Long Column Type Reactor Pressure Vessel Supports

2019 ◽  
Author(s):  
Goeun Han ◽  
Sukru Guzey
Keyword(s):  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Structural Integrity ◽  
Element Model ◽  
Reactor Pressure Vessel ◽  
Primary Coolant ◽  
Type Reactor ◽  
Column Type ◽  
Unfavorable Condition ◽  
Reactor Pressure

Abstract The structural steel in a nuclear facility experiences significant degradation due to the accumulated neutron irradiation. Particularly, the long-column type reactor pressure vessel supports have been focused since they resist considerable loading to maintain the primary coolant system in their position and experience high neutron irradiation in low temperature, which is an unfavorable condition for the fracture toughness. This study implemented the API 579-1/ASME FFS-1, fitness-for-service (FFS) method to consider both irradiated mechanical properties and multiple loading cases. A three-dimensional (3D) finite element model of long column type reactor pressure vessel support was built for the linear analysis. The metallurgical properties of reactor pressure vessel support for assessment were estimated by empirical equations. This study provides the structural margin of long-column type reactor pressure vessel support by levels of the loads and levels of the neutron fluence.

Experimental Simulation of Neutron Irradiation Damage in Reactor Pressure Vessel Steels

2006 ◽  
Vol 324-325 ◽  
pp. 1189-1192
Author(s):  
Fahim Hashmi ◽  
Su Jun Wu ◽  
Huan Xi Li
Keyword(s):  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Structural Integrity ◽  
Reactor Pressure Vessel ◽  
Life Assessment ◽  
Experimental Simulation ◽  
Irradiation Damage ◽  
Irradiation Embrittlement ◽  
Surveillance Programs ◽  
Reactor Pressure

Degradation of reactor pressure vessel (RPV) steels due to neutron irradiation embrittlement is directly related to safety and life of the nuclear power plant (NPP). In order to ensure structural integrity and safe operation of NPP, surveillance programs are conducted to monitor and predict the changes in RPV materials. Availability of irradiated specimen from RPV or irradiation of specimens under simulated conditions of RPV for conducting fracture toughness tests remains a major problem in surveillance programs. In order to resolve this problem, various methods are adopted to experimentally simulate the effect of neutron irradiation on mechanical behavior of RPV steels using electron irradiation, thermal aging, strain hardening, combined quenching and hardening and pre-straining combined with heat treatment. This paper presents a review of the existing research on experimental simulation of neutron irradiation damage through various methodologies and discusses the future scope of their application in plant safety and life assessment of RPV’s.

Effects of Neutron Irradiation on the Mechanical and Electromagnetic Properties of Reactor Pressure Vessel Steels

2017 ◽  
Author(s):  
Li Chengliang ◽  
Shu Guogang ◽  
Chen Jun ◽  
Liu Yi ◽  
Liu Wei ◽  
...  
Keyword(s):  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Power Plants ◽  
Hysteresis Loops ◽  
Reactor Pressure Vessel ◽  
Electromagnetic Properties ◽  
Irradiation Damage ◽  
Indentation Hardness ◽  
Rpv Steel ◽  
Reactor Pressure

The effect of neutron irradiation damage of reactor pressure vessel (RPV) steels is a main failure mode. Accelerated neutron irradiation experiments at 292 °C were conducted on RPV steels, followed by testing of the mechanical, electrical and magnetic properties for both the unirradiated and irradiated steels in a hot laboratory. The results showed that a significant increase in the strength, an obvious decrease in toughness, a corresponding increase in resistivity, and the clockwise turn of the hysteresis loops, resulting in a slight decrease in saturation magnetization when the RPV steel irradiation damage reached 0.0409 dpa; at the same time, the variation rate of the resistivity between the irradiated and unirradiated RPV steels shows good agreement with the variation rates of the mechanical properties parameters, such as nano-indentation hardness, ultimate tensile strength, yield strength at 0.2% offset, upper shelf energy and reference nil ductility transition temperature. Thus, as a complement to destructive mechanical testing, the resistivity variation can be used as a potentially non-destructive evaluation technique for the monitoring of the RPV steel irradiation damage of operational nuclear power plants.

Evolution of precipitation in reactor pressure vessel steel welds under neutron irradiation

2017 ◽  
Vol 488 ◽  
pp. 222-230 ◽  
Author(s):  
Kristina Lindgren ◽  
Magnus Boåsen ◽  
Krystyna Stiller ◽  
Pål Efsing ◽  
Mattias Thuvander
Keyword(s):  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Reactor Pressure Vessel Steel ◽  
Steel Welds ◽  
Reactor Pressure

Structural Integrity Research for Reactor Pressure Vessel Under In-Vessel Retention of a Core Melt

2016 ◽  
Author(s):  
Yongjian Gao ◽  
Yinbiao He ◽  
Ming Cao ◽  
Yuebing Li ◽  
Shiyi Bao ◽  
...  
Keyword(s):  
Pressure Vessel ◽  
Material Properties ◽  
Power Plants ◽  
Structural Integrity ◽  
Plastic Material ◽  
Plastic Region ◽  
Reactor Pressure Vessel ◽  
Elastic Plastic ◽  
Elastic Plastic Material ◽  
Reactor Pressure

In-Vessel Retention (IVR) is one of the most important severe accident mitigation strategies of the third generation passive Nuclear Power Plants (NPP). It is intended to demonstrate that in the case of a core melt, the structural integrity of the Reactor Pressure Vessel (RPV) is assured such that there is no leakage of radioactive debris from the RPV. This paper studied the IVR issue using Finite Element Analyses (FEA). Firstly, the tension and creep testing for the SA-508 Gr.3 Cl.1 material in the temperature range of 25°C to 1000°C were performed. Secondly, a FEA model of the RPV lower head was built. Based on the assumption of ideally elastic-plastic material properties derived from the tension testing data, limit analyses were performed under both the thermal and the thermal plus pressure loading conditions where the load bearing capacity was investigated by tracking the propagation of plastic region as a function of pressure increment. Finally, the ideal elastic-plastic material properties incorporating the creep effect are developed from the 100hr isochronous stress-strain curves, limit analyses are carried out as the second step above. The allowable pressures at 0 hr and 100 hr are obtained. This research provides an alternative approach for the structural integrity evaluation for RPV under IVR condition.

Development of an Integrity Evaluation System on the Basis of Cooperative Virtual Reality Environment for Nuclear Power Plant

2004 ◽  
Author(s):  
J. C. Kim ◽  
J. B. Choi ◽  
Y. H. Choi
Keyword(s):  
Virtual Reality ◽  
Power Plant ◽  
Nuclear Power Plant ◽  
Pressure Vessel ◽  
Evaluation System ◽  
Nuclear Power ◽  
Structural Integrity ◽  
Reactor Pressure Vessel ◽  
Virtual Reality Environment ◽  
Reactor Pressure

Since early 1950’s fracture mechanics has brought significant impact on structural integrity assessment in a wide range of industries such as power, transportation, civil and petrochemical industries, especially in nuclear power plant industries. For the last two decades, significant efforts have been devoted in developing defect assessment procedures, from which various fitness-for-purpose or fitness-for-service codes have been developed. From another aspect, recent advances in IT (Information Technologies) bring rapid changes in various engineering fields. IT enables people to share information through network and thus provides concurrent working environment without limitations of working places. For this reason, a network system based on internet or intranet has been appeared in various fields of business. Evaluating the integrity of structures is one of the most critical issues in nuclear industry. In order to evaluate the integrity of structures, a complicated and collaborative procedure is required including regular in-service inspection, fracture mechanics analysis, etc. And thus, experts in different fields have to cooperate to resolve the integrity problem. In this paper, an integrity evaluation system on the basis of cooperative virtual reality environment for reactor pressure vessel which adapts IT into a structural integrity evaluation procedure for reactor pressure vessel is introduced. The proposed system uses Virtual Reality (VR) technique, Virtual Network Computing (VNC) and knowledge based programs. This system is able to support 3-dimensional virtual reality environment and to provide experts to cooperate by accessing related data through internet. The proposed system is expected to provide a more efficient integrity evaluation for reactor pressure vessel.

Manufacturing and Properties of Closure Head Forging Integrated With Flange for PWR Reactor Pressure Vessel

2004 ◽  
Author(s):  
Komei Suzuki ◽  
Etsuo Murai ◽  
Yasuhiko Tanaka ◽  
Iku Kurihara ◽  
Tomoharu Sasaki ◽  
...  
Keyword(s):  
Weld Joint ◽  
Pressure Vessel ◽  
Material Properties ◽  
Impact Test ◽  
Structural Integrity ◽  
Reactor Pressure Vessel ◽  
Conventional Design ◽  
Manufacturing Technologies ◽  
Reactor Pressure

Closure head forging (SA508, Gr.3 Cl.1) integrated with flange for PWR reactor pressure vessel has been developed. This is intended to enhance structural integrity of closure head resulted in elimination of ISI, by eliminating weld joint between closure head and flange in the conventional design. Manufacturing procedures have been established so that homogeneity and isotropy of the material properties can be assured in the closure head forging integrated with flange. Acceptance tensile and impact test specimens are taken and tested regarding the closure head forging integrated with flange as very thick and complex forgings. This paper describes the manufacturing technologies and material properties of the closure head forging integrated with flange.

Effect of neutron irradiation on the mechanical properties of weld overlay cladding for reactor pressure vessel

2014 ◽  
Vol 452 (1-3) ◽  
pp. 61-68 ◽  
Author(s):  
Tohru Tobita ◽  
Makoto Udagawa ◽  
Yasuhiro Chimi ◽  
Yutaka Nishiyama ◽  
Kunio Onizawa
Keyword(s):  
Mechanical Properties ◽  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Weld Overlay ◽  
Reactor Pressure
Sign in / Sign up

Export Citation Format

Share Document